Power Instruments

Power Instruments relate to the measurement, display, logging, analysing, and reporting of Power in various applications. This can be for power consumption for residential, commercial, and industrial sites for billing purposes. Network Power Analysers are for measuring and recording electrical parameters for consumption analysis, monitoring, and control of the power infrastructure network of industrial sites. Power Analysers are for type testing of electrical infrastructure including transformers and motors. Power Quality analysers are for the field testing and analysis of electrical infrastructure.

Three-Phase Network Analyser Kit | UPM309RGW
R14,544.00 – R22,880.00 ex vat
Three-Phase Network Analyser Kit - Overview

This kit is used for the measurement and recording of the electrical parameters. It is suitable for consumption analysis and control and has an excellent quality/price ratio. The UPM309 power meter is the ideal instrument for establishing the measurement points on the plant and can be managed remotely. Data generated creates consumption profiles, recorded values trends, alarms and events reports, costs calculation as well as critical values identification. The Kit consists of a network analyser and 3 Rogowski coils. The use of Rogowski coils for current measurement allows quick installation on existing plants. The instrument can also be fit for the current consumption without replacing the transducer.

Three-Phase Network Analyser Kit - Features
- DIN 96x96 ultra-compact version, only 39 mm depth
- Fully bi-directional four-quadrant measurements
- Main electrical parameters measured and displayed
- 4 available KITs: 30, 45, 70, 90 cm coil length
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording
- Can record all energy counters
- Up to 24 parameters selectable
- MODBUS RTU communication by RS485 port / MODBUS TCP communication by Ethernet port
- Can manage the instrument in remote mode with WintoolNET software or by Web interface
- 2 digital outputs, 1 digital input
- Accuracy class 0.5 according to IEC/EN 61557-12 for active power/energy
Select options
Mounted Power Quality Analyser | PQM-750
R91,979.00 ex vat
Mounted Power Quality Analyser - Overview

The Mounted Power Quality Analyser is a stationary meter. It is designed to be mounted on a DIN rail and can be mounted on a wall in a cabinet. It has a modular design that allows the expansion of the meter. It measures and records power supply parameters for compliance with standards and applicable laws. It can verify the preset terms of a power sale or purchase contract. It is manufactured in class A. The instrument allows measurements in 50 Hz, 60 Hz and 400 Hz networks.

Mounted Power Quality Analyser - Features
- Full class A according to IEC 61000-4-30
- 5 Voltage input terminals: L1, L2, L3, N, E
- 5 current transformers: L1, L2, L3, N, E currents
- Operation in 50 Hz, 60 Hz networks, 400 Hz networks coming soon
- Recording of voltage and current events along with waveforms
- Measurement of more than 4,000 parameters
- 24-bit analogue-to-digital converter
- Basic sampling rate of 80 kHz
- Conducted emissions monitoring in the 2…150 kHz band
- Two LAN ports, option of powering PoE (Power over Ethernet)
- Power supply 85…264 V AC (120…300 V DC),
- Built-in rechargeable battery
- 8 GB memory (microSD card)
- USB port for meter updates and data exchange
- Two binary inputs, two relay outputs, two RS-485 ports
- Relay output to monitoring analyser operation (Watchdog)
- 1-wire input for external temperature sensors
- 2.4” touch screen
- DIN rail or wall mounting
- Expansion bus allowing connection of various external modules (e.g. GPS, LTE)
- Built-in web server for programming, reading data, viewing events with oscillogram/RMS display
- Time synchronization with reference via NTP servers, IRIG-B (via built-in RS-485)
- Optional GPS module
- Measurement category CAT III 600 V (IV 300 V) for voltage inputs
- Measurement category CAT III 300 V for current inputs
- Possibility of sealing current and voltage inputs
Add to basket
High-Performance Power Analyzer | PPA4500
R203,011.00 – R601,515.00 ex vat
High-Performance Power Analyzer PPA4500 Overview

The PPA4500 features high-speed FPGA/DSP sampling techniques and the highly respected “Planar Shunt” Technology. The PPA4500 is the product of over 12 years of research and development. The PPA4500 has improved accuracy, color TFT, front USB port, and faster processing than older models. The PPA4500 is a significant leap forward in both accuracy and functionality. The PPA4500 is suitable for transformer loss testing, PWM inverter drive efficiency testing, standby power testing to IEC62301/EN50564, and many more challenging applications.

The PPA4500 can measure fundamental frequencies up to 2MHz, as well as up to 100 Harmonics with the same 2MHz upper-frequency limit. PWM Motor drive mode enables the engineer to rapidly set up the instrument to measure complex harmonically distorted waveforms, sophisticated signal processing algorithms facilitate high sample rate (2Ms/s) true wideband (2Mhz) analysis of PWM signals. The PPA4500 utilizes parallel digital filtering for fundamental frequency synchronisation without affecting the bandwidth of the measured data.

High-Performance Power Analyzer PPA4500 Features & Benefits
- 0.03% Basic accuracy
- Frequency range DC and 10mHz to 2MHz
- High precision internal shunts
- Superior accuracy to any external shunt
- 5 millidegree phase accuracy for low power factor applications
- Up to 50 Arms (1000 Apk) & 1000 Vrms (3000 Vpk) direct input
- Low current (10Arms), Standard (30Arms), and High current (50Arms) options
- High-speed sampling on all channels (2Ms/s)
- True real-time analysis with no measurement gap
- 1, 2, or 3 phase versions master-slave mode for 4, 5, or 6 phase
- Real-time Digital, Tabular, Graphic, and Oscilloscope displays
- Simple BNC connection of N4L shunts for high-current applications
- RS232, IEEE 488, USB, LAN, Torque, Speed and Extension ports
[embed] https://youtu.be/V0TlkxRY6h0[/embed]

Select options
Power Amplifier ±12Vpk 1MHz | LPA01
R50,995.00 ex vat
Power Amplifier ±12Vpk 1MHz - Overview

The Power Amplifier LPA01 range of power amplifiers from N4L is robust and reliable for use in a variety of industrial and laboratory applications. Designed originally for use with Phase Sensitive Multimeters, the LPA01 can also be used anywhere where there is a need to boost a signal either in voltage or current. They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive, or resistive. Optionally, the DC component can be eliminated with AC coupling or can be reduced with AC+(DC) coupling. To limit high-frequency noise, the input bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low-frequency applications.

Power Amplifier ±12Vpk 1MHz - Features
- DC accurate and wide bandwidth
- 1A Peak output current @ up to ±14V peak (LPA01).
- High slew
- Stable into a wide range of loads.
- Isolated to 40V common mode to reject ground loop
- The robust metal enclosure will fit underneath QuanteQ or Veqtor to boost output
- Switch selectable coupling options: AC, AC+DC, or AC with reduced
- Switch selectable precision gain
- Switch selectable
Datasheet

Add to basket
Power Amplifier ±16/20Vpk 1MHz | LPA05
R90,227.00 – R93,235.00 ex vat
Power Amplifier ±16/20Vpk 1MHz - Overview

The Power Amplifier LPA500 range of power amplifiers from N4L is robust and reliable for use in a variety of industrial and laboratory applications. Designed originally for use with Phase Sensitive Multimeters, they can also be used anywhere where there is a need to boost a signal either in voltage or current. They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive, or resistive. Optionally, the DC component can be eliminated with AC coupling or can be reduced with AC+(DC) coupling. To limit high-frequency noise, the input bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low-frequency applications.

Power Amplifier ±16/20Vpk 1MHz - Features
- DC and AC wide bandwidth
- Switch selectable coupling options: AC, AC+DC, or AC with reduced DC
- Fixed x10 Gain
- Switch selectable bandwidth
- High slew rate
- Isolated BNC or 4mm output sockets
- ±40V peak | 3A rms / 5A peak | (LPA05A resistive load)
- ±16V peak | 5A rms / 8A peak | (LPA05B resistive load)
- Isolated from ground to prevent earth loops
- Robust metal enclosure
Datasheet

Select options
Power Amplifier ±400Vpk 1MHz | LPA400
R84,212.00 – R87,220.00 ex vat
Power Amplifier ±400Vpk 1MHz - Overview

The Power Amplifier LPA400 range of power amplifiers from N4L is robust and reliable for use in a variety of industrial and laboratory applications. Designed originally for use with Phase Sensitive Multimeters, they can also be used anywhere where there is a need to boost a signal either in voltage or current. They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive, or resistive. Optionally, the DC component can be eliminated with AC coupling or can be reduced with AC+(DC) coupling. To limit high-frequency noise, the input bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low-frequency applications.

Power Amplifier ±400Vpk 1MHz - Features
- DC accurate and wide bandwidth
- Switch selectable coupling options: AC, AC+DC, or AC with reduced
- Switch selectable precision gain
- Switch selectable
- High slew
- ± 400V peak, 50mA rms (LPA400).
- ± 180V peak, 100mA rms (LPA400B).
- Stable into a wide range of loads.
- Isolated to 40V common mode to reject ground loop
- Robust metal enclosure will fit underneath QuanteQ or Veqtor to boost output
Datasheet

Select options
Precision Power Analyzer | PPA5500
R233,087.00 – R661,667.00 ex vat
Precision Power Analyzer - Overview

The PPA5500 Power Analyzer is a compact, cost-effective, leading power measurement performance instrument. It has exceptional accuracy and stability in the most demanding of power applications. The Power Analyzer 5500 series extends the power analysis range for those who require the ultimate power analysis product.

The PPA5500 adds increased voltage and current measurement ranges, greater processing power, increased memory, a real-time clock, high contrast visible colour display, 1GB non-volatile internal memory, external USB memory port, wide frequency range and exceptional noise rejection. A 2MS/s sample rate, alongside “True Real-Time” no gap analysis is a formidable combination for power analysis. The analogue front-end design includes the proprietary "Planar shunt technology". This instrument provides exceptional measurement stability and accuracy. The phase angle accuracy of the PPA5500 is 0.005 degrees which are perfect for transformer loss analysis testing at very low power factors.

Precision Power Analyzer - Features
- 0.01% Basic accuracy
- Frequency range DC and 10mHz to 2MHz
- High precision internal shunts Superior accuracy to any external shunt
- 5 millidegree phase accuracy necessary for low power factor applications
- Up to 50 Arms (1000 Apk) & 1000 Vrms (3000 Vpk) direct input
- Low current (10Arms), Standard (30Arms), and High current (50Arms) options
- High-speed sampling on all channels
- True real-time analysis with no measurement gap
- 1, 2, or 3 phase versions master-slave mode for 4, 5, or 6 phase
- Real-time Digital, Tabular, Graphic, and Oscilloscope displays
- Simple BNC connection of N4L shunts for high-current applications
- RS232, IEEE 488, USB, LAN, Torque, Speed and Extension ports
https://www.youtube.com/watch?v=ntKljPrXvYM

Select options
Programmable Power Sources AC+DC 3kVA ~ 67kVA | N4A
R678,788.00 – R3,411,081.00 ex vat
Programmable Power Sources - Overview

The N4A range of Programmable AC Power Sources offers complete flexibility for a wide range of applications. All N4A sources feature dual-channel arbitrary waveform generators utilising direct digital synthesis, providing the user with simultaneous multiple harmonic generations, frequency sweeping, and long sequencing capabilities. The metrology of the arbitrary generator permits long custom waveform sequences to be produced without a reduction in the resolution of each waveform. The N4A AC Source also features a 10-bit vertical resolution and a maximum waveform resolution of 16,384 points to produce a single periodic waveform. There is also an internal storage function for imported custom waveforms featuring user-intuitive library menus that display the waveform graphically on the display.

The N4A AC power sources feature an extremely flexible waveform generator capable of mathematical waveform generation, data point waveform upload, and many sequencing functions. Traditionally, switching topologies have struggled to provide total harmonic distortion (THD) figures below 2%. The N4A “6-legged topology” provides less than 0.3% THD and typically 0.1%, the N4A range of AC Power Sources should be considered the best value power generator on the market. Ranging from the N4A06 6kVA model (300Vrms, 20A) to the N4A67 67kVA model (67kVA, 75A /phase) – the N4A will suit a wide range of applications including;
- Aerospace
- Renewable Energy
- Compliant to IEC61000-3-2/12 and IEC61000-3-3/11 Harmonics and Flicker Testing
- Compliant to IEC61000-4-11 Voltage Dips and Interrupts immunity test standard
- IEC61000-4-13 harmonic and inter-harmonic susceptibility test standard
- PWM Inverter Drive Development
- Automotive
- Standby Power
- Battery Development
Programmable Power Sources -Features
- Low THD <0.3% (0.1% typical)
- DC+AC Output - DC-1kHz (10kHz small signal bandwidth)
- Single Phase and 3 Phase systems available
- EMC Compliance - IEC61000-3-2/3/11/12, IEC61000-4-11/13/17/29
- Market Leading Inrush - 2x Continuous Output for 3 seconds
- Fast Switch on Time - Proprietary Design
- Versatile interfaces - RS232, USB, LAN
- Arbitrary Waveform - Custom Arbitrary Waveform, Sequencing and More
- Pre Set Waveforms - Stored in Hardware for Fast Recall
- High Efficiency >80%
- Up to 67kVA 3 Phase Solutions
- Compact Design - High Power Density
Datasheet

Select options
2
Selective Level Meter | SLM 3505
R269,972.00 ex vat
Selective Level Meter - Overview

The Selective Level Meter SLM3505 was designed to provide a single-instrument solution for the Electric Utility System Protection Engineers and Relay/Communications Technicians responsible for the alignment and maintenance of Power Line Carrier, Audio Tone, and FSK Communications Systems. This multifunction instrument replaces all 4 existing Power Line Carrier Instruments for a fraction of the cost. All in a compact lightweight package.

Selective Level Meter SLM 3505 Features
- Frequency range 5Hz to 5MHz
- Selectable inputs up to 300 Vpk
- Low and High-level generators
- Dual-frequency SLM mode
- Impedance analyzer
- VSWR Meter
- Oscilloscope mode
- Line trap/tuner test
- Mains / 12 volt dc / internal battery operation
- Supplied complete with rugged flight case
Datasheet

Select options
Transformer Edition Power Analyzer | PPA5500-TE
R39,596.00 – R257,974.00 ex vat
Transformer Edition Power Analyzer - Overview

The PPA5500-TE provides unrivalled measurement integrity, reliability and accuracy. Each and every PPA5500-TE is rigorously tested within N4L’s ISO17025 Accredited Power Laboratory in which specialised power calibration from 40Hz to 450Hz is performed alongside N4L’s well-documented wideband calibration, up to 2MHz. The PPA5500-TE is compliant to IEC60076-8 and provides a 3-year warranty as well as a 2-year calibration interval. Power Transformer loss analysis becomes challenging when the transformer is off-load (for example whilst performing core loss analysis), this test condition requires the power analyzer to exhibit exceptional phase angle accuracy and repeatability. The PPA5500-TE provides market-leading low power factor analysis, supplied with UKAS ISO17025 certification.

Transformer Edition Power Analyzer - Features
- 0.07% Nominal Power Accuracy
- 0.55% Power Accuracy at PF=0.01
- 0.003° Phase accuracy
- Widest Voltage, Current and Frequency range in the market
- Unrivalled Performance, Unquestionable Traceability
Datasheet

Select options
2
Power Quality Analyzer | PQM-707
R52,529.00 – R76,000.00 ex vat

Power Quality Analyzer - Overview

This Power Quality Analyzer allows for versatile measurement, analysis, and registration of energy network parameters DC and 50/60Hz. This includes measuring the quality of electric energy in accordance with the European standard EN 50160. To Guarantee accuracy, all parameters are measured with Class S according to the IEC 61000-4-30 STANDARD.

This is the largest in this class of power quality analyzers and has a 7-inch colour touch screen which enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for work during the measurement without the necessity of connecting an external AC adapter.

The analyzer can be used directly, or indirectly via transformers in virtually all kinds of networks with rated voltage from 54V to 760V. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. With a safety rating of CAT IV 600V, the Power quality analyzer provides peace of mind during everyday use. The PQM-707 can therefore be used in the field of professional power engineering, maintenance services in industrial plants, as well as network analysis.

Power Quality Analyzer - Features
- 7" touch screen 800x480 pixel - intuitive operating
- CAT IV 600V - high safety
- Parameters acc. to class S - high accuracy of measurements
- Li-Ion rechargeable battery - higher mobility
- Removable memory card - recording data with no restrictions
- Possible measurements:
  - Measurements according to EN 50160
  - Voltage L1, L2, L3, N-PE (five inputs)
    
    average, minimum, maximum values, range to 760 V DC and 50/60Hz, ability to work with voltage transformers
  - Current L1, L2, L3, N (four inputs)
    
    average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers
  - Crest factor for voltage and current
  - Frequency from 40 Hz to 70 Hz
  - Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
  - Power recording:
    
    Budeanu method
    
    IEEE 1459
  - Active, reactive, apparent energy
  - Power factor, cosφ, tgφ
  - Up to 50th harmonics for voltage and current
  - Total Harmonic Distortion (THD) for voltage and current
  - Short-term (PST) and long-term (PLT) flicker
  - Unbalance of voltage and current
  - Current and voltage events registration including waveforms and RMS graphs half period
  - Inrush current
  - Calculator of energy tariffs
  - Analyzer measures and records according to the IEC 61000-4-30 class standard
Select options
1
Power Quality Analyzer PQM-700
R37,530.00 ex vat

Power Quality Analyser PQM-700 - Overview

Power Quality Analyzers are high-tech devices providing their users with comprehensive features for measuring, analyzing and recording parameters of 50/60 Hz power networks and power quality in accordance with the European Standard EN 50160. The analyzer is fully compliant with the requirements of IEC 61000-4-30:2009, Class S. The device is equipped with four cables terminated with banana plugs, marked as L1, L2, L3, N. The range of voltages measured by the four measurement channels is max. ±1150 V. This range may be extended by using external voltage transducers.

PQM-700 Power Quality Analyzer Features:
- Power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V
- Particular emphasis on measurements at low voltage poles, due to the ease of connection
- Independent power supply socket for voltage measurements for transformers and DC circuits
- Built-in real-time clock
- Measurements according to EN 50160
- Voltage L1, L2, L3, N
  - average, minimum, maximum and instantaneous values
  - range to 760 V
  - ability to work with voltage transformers
- Current L1, L2, L3, N (four inputs)
  - average, minimum, maximum and instantaneous values
  - measurement current with range to 3 kA (depends on used clamp)
  - ability to work with current transformers
- Crest factor for voltage and current
- Frequency from 40 Hz to 70 Hz
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
- Power recording:
  - Budeanu method
  - IEEE 1459
- Active, reactive, apparent energy
- Power factor, cosφ, tgφ
- Up to 40th harmonics for voltage and current
- Total Harmonic Distortion (THD) for voltage and current
- Short-term (PST) and long-term (PLT) flicker
- Unbalance of voltage and current
- Current and voltage events registration including waveforms and RMS graphs half period
Add to basket
Benchtop Power Analyzer up to 8 Phase Analysis | PPA3500
R327,826.00 – R481,212.00 ex vat
High-Performance PPA3500 up to 8-Phases Power Analysis Overview

The PPA3500 is a high accuracy 3~6 phase power analyzer able to perform reliable, accurate power analysis in a variety of applications. DUT to innovative analogue card design, the PPA3500 is packaged in a compact 2U chassis. The PPA3500 is available in 3, 4, 5 or 6-phase configurations. The PPA3500 power analyzer benefits from a full colour “Dual” TFT display, this concept employs two TFT displays within one instrument, allowing for a large widescreen display area in a 2U form factor. There is also the option to install the unit in a 19"| rack providing a 2U 6 Phase solution, see accessories for more details.

Proprietary Technology featuring the industry-renowned planar shunt technology (A shunt design topology developed by N4L) and FPGA based real-time no-gap analysis techniques, the PPA3500 is able to provide groundbreaking 6-phase analysis performance. Real-Time no gap analysis ensures efficiency measurements are entirely synchronized between input and output.

All PPA3500 units are supplied with UKAS ISO17025 certification as standard, this is performed at N4L in the UK in our accredited ISO17025 Laboratory.

6 phase Power Analyzer Features
- Designed specifically for inverter drive applications
- Excellent Accuracy 0.03%
- Wide Bandwidth ideal for distorted signal analysis such as PWM Inverter drives
- 1MHz Bandwidth
- Torque and Speed inputs fitted as standard +/- 10V, Analogue DC and Pulsed Inputs
- Extremely high accuracy phase measurement of 0.01deg
- Real-time monitoring and efficiency calculation of Electrical to Electrical and Electrical to Mechanical
- ISO17025 (UKAS) traceable certification supplied
- 8 Phase Analysis Use 3P2W + CH3 + 3P2W + CH3 to measure 8 phases including 3 Phase Input Power, DC Bus and 3 Phase Output Power
- Low profile – 2U High, up to 6 Phase measurement
- DFT Based Power Calculation Utilize the Power of DFT Fourier analysis, made possible using top-of-the-range DSPs and FPGAs
- PWM Motor drive mode for quick easy setup
https://www.youtube.com/watch?v=ntKljPrXvYM

Select options
1
Power Quality Analyser PQM-710 & PQM711
R135,830.00 – R189,229.00 ex vat

Power Quality Analyser - Overview

These power quality analysers measure, analyse and record network parameters of 50/60 Hz and perform power quality diagnostics according to the European standard EN. PQM-710 is an innovative model with Wi-Fi, which allows for automatic pairing with the included 10" touch tablet. The tablet enables remote operation of the analyser, live data preview, as well as reading and analysis of data stored in the internal memory. With this solution, the PQM-710 is a unique device that combines the advantages of an analyser with built-in display and typical portable analysers (also known as Black Boxes). You can also use the analyser module as a typical logger without a display for multiple measurements. You can very efficiently diagnose the machine under test using the tablet. In practice, the analyser may be used with all network types with rated voltage from 110 V to 760 V, directly or indirectly via transducers.

Power Quality Analyser - Features
- It works in the following networks:
  - one-phase
  - split-phase with N wire
  - three-phase Wye type, with and without N wire
  - three-phase delta type
  - with constant voltage
- Measurements according to EN 50160
- Voltage L1, L2, L3, N-PE
  - average, minimum, maximum and instantaneous values
  - range to 760V
  - ability to work with voltage transformers
- Current L1, L2, L3, N (four inputs)
  - average, minimum, maximum and instantaneous values
  - measurement current with range to 3 kA (depends on used clamp)
  - ability to work with current transformers
- Crest factor for voltage and current
- Frequency from 40Hz to 70Hz
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
- Power recording:
  - Budeanu method
  - IEEE 1459,
- Active, reactive, apparent energy
- Power factor, cosφ, tgφ
- K factor (transformer overload caused by the harmonics)
- Up to 50^th harmonics for voltage and current
- Total Harmonic Distortion (THD) for voltage and current
- Short-term (P_ST) and long-term (P_LT) flicker
- Unbalance of voltage and current
- Current events detection, including waveforms recording
- Current and voltage waveforms recording after each averaging period
- Measure transient Voltages of up to 6000V PQM-711
Suitable for use in power industry, industrial maintenance services, and network analysis services.

Select options
Power Analyser | PPA1500
R120,303.00 – R180,455.00 ex vat
Power Analyser PPA1500 - Overview

The PPA1500 Power Analyser offers higher performance compared to its sibling – the PPA500 unit. N4L power analysers provide optimum solutions in almost any power measurement application and budget. The PPA1500 offers a 1Mhz Bandwidth and full graphic display, this includes harmonic bar graphs and graphic data logging. It features sophisticated parallel digital filtering algorithms enabling the PPA1500 to be used in various Pulse Width Modulated applications.

While being only half-rack width and 2U high, the PPA1500 is available in 1, 2 or 3-phase configurations and offers a level of performance normally found only in larger and more costly instruments. With modes such as “Inrush Current and “Standby Power”, the PPA1500 provides fast, accurate and easy measurements in challenging environments.

The PPA1500 series analysers now have a 6 Phase 2U Rack option in which two PPA1530 units are installed on the same rack side by side to give the ability to perform 6 Phase 0.1% accurate power measurement whilst only occupying a height of 2U in any rack.

All PPA1500 units are supplied with UKAS ISO17025 certification as standard, this is performed at N4L in the UK in our accredited ISO17025 Laboratory.

Power Analyser PPA1500 - Features
- High contrast full-colour graphic display
- Simple BNC connection of N4L shunts for high-current applications
- RS232, USB, LAN, Extension and Auxiliary ports
- 0.05% Basic accuracy
- Frequency range DC and 10mHz to 1MHz
- High-precision internal shunts – Superior accuracy to any external shunt
- 10 millidegree phase accuracy – Necessary for low power factor applications
- 20 Arms (300 Apk) & 1000 Vrms (2500 Vpk) direct input
- Unique x10 gain mode for Standby Power measurement
- 1MS/s High-speed sampling on all channels
- True real-time analysis with no measurement gap
- 1, 2 or 3 phase versions
https://www.youtube.com/watch?v=AUGd54KrkfE

Select options