Thickness Meters

Thickness Meters measure the thickness of a pipe or material. Ultrasonic Thickness Gauges allow you to test the thickness of a pipe from one side. As it is not always possible to measure from both sides of an object, this is a quick and easy method to establish the subject’s thickness.

Advanced Ultrasonic Thickness Gauge | JT5101
R5,275.00 ex vat
Advanced Ultrasonic Thickness Gauge - Overview

This gauge is a quick, non-destructive thickness measurement gauge. Suitable for use on the side of solid materials that conduct ultrasound waves e.g. steel and other metals, glass, plastics, ceramics etc. There are some limitations to upper and lower measuring ranges depending on sound velocity and density of the material. It is ideally suited for testing on smooth clean surfaces. Any dirt, rust or coatings should be removed for accurate readings.

Advanced Ultrasonic Thickness Gauge - Features
- Range: 0.75 ~ 600.00mm (in steel)
- Range is material and probe dependant
- Tolerance ±(0.5% Thickness +0.04)mm depending on conditions
- Velocity: 1000 m/s ~ 9999 m/s
- Resolution: 0.01mm
- Auto calibration with built-in 4mm block and coupling status
- High / Low limit setting
- USB port with 400 Reading memory
- Built-in rechargeable battery
- c/w carry case, 5MHz angled probe, coupling agent, software, USB cable, charger and manual
Optional probes available:
- High temperature probe (max 300°C)
  7MHz for thin material and small arc surfaces
  2MHz for castings, high scatter or rough surfaces
Select options
Economical Ultrasonic Thickness Gauge | GT1201
R1,575.00 – R4,500.00 ex vat
Economical Ultrasonic Thickness Gauge - Overview

This ultrasonic thickness gauge is suitable for quick non-destructive thickness measurement. Measurements are taken from one side of the solid material that is a good conductor of ultrasound waves e.g. steel and other metals, glass, plastics, ceramics etc. There are some limitations to upper and lower measuring ranges depending on sound velocity and density of the material. Ideally suited for testing on smooth clean surfaces. Any dirt, rust or coatings should be removed for accurate readings.

Economical Ultrasonic Thickness Gauge - Features
- Auto calibration with built-in 4mm block & coupling status
- High / Low limit setting
- 1500 Reading memory, PC software available
- Range: 1.00 ~ 300.0mm (in steel)
- Range is material and probe dependant
- Tolerance ±(0.5% Thickness +0.05) mm depending on conditions
- Velocity: 1000 m/s ~ 9999 m/s
- Resolution: 0.01mm up to 99.99 / 0.1mm over 100.0
- Built-in 3.7V rechargeable battery
- c/w carry case, 5Md10 probe, coupling agent, USB cable and manual
Select options
Economic Ultrasonic Thickness Gauge | WT130A
R5,200.00 ex vat
Economic Ultrasonic Thickness Gauge - Overview

Quick non-destructive thickness measurement of solid materials suitable for conducting ultrasound waves e.g. metals, glass, plastics, ceramics etc. Upper and lower measuring ranges are limited depending on the sound velocity and density of the material. This entry-level thickness gauge is ideally suited for testing on smooth clean surfaces. Any dirt, rust or coatings should be removed for accurate readings.

Economic Ultrasonic Thickness Gauge - Features
- Auto calibration with built-in 4mm block and coupling status
- High / Low limit setting
- 1500 Reading memory (on-screen viewing only)
- Power 3 x AAA Rechargeable batteries
- c/w carry case, 5Md10 and 5Md6 probes, coupling agent, USB cable, charger, batteries and manual
- Range: 1.00 ~ 300.0mm (in steel)
- Range is material and probe dependant
- Tolerance ±(0.5% Thickness +0.05)mm depending on conditions
- Velocity: 1000 m/s ~ 9999 m/s
- Resolution: 0.01mm up to 99.99 / 0.1mm over 100
Optional probes available:

High temperature probe (max 300°C)
2MHz for castings, high scatter or rough surfaces

Add to basket
2
EMA Thickness Gauge | UT-3M-EMA
R92,427.00 – R104,791.00 ex vat
EMA Thickness Gauge - Overview

Using Electromagnetic-acoustic (EMA) technology, the EMA Thickness Gauge can test the thickness of metal products on oxidised, painted or oily surfaces. Can be equipped to measure on high temperatures with high-temperature probes. Useful for testing where traditional methods are not applicable.

EMA Thickness Gauge - Features
- Contactless measurement of metal products
- Measurement on oxidised, painted or oily surfaces
- High-Temperature Probes -measure on up to temperature of 600 °C
- Measurement range - 0.5 mm to more than 200 mm
- Easy thickness gauge execution
- Lightweight and durable metal case
- Available in dust and waterproof design (IP65)
- Long battery life - up to 30 hours (optional)
- Automatic operation mode and various types of signal displaying
- Software for transfer of data and processing in convenient formats
https://www.youtube.com/watch?v=HUxekDhv-Bg

Select options
Coating Thickness Knife Tester | TPN-2808
R5,569.00 ex vat
Coating Thickness Knife - Overview

Coating Thickness Knife Tester TPN-2808 (Paint Inspection Gauge) is designed to measure the thickness of both single and multiple-layer coatings on both metallic and non-metallic surfaces. The operation principle is based on the local cut (notch) of the coating at the tested place of an object with the following thickness measurement of this coating. The thickness of the coating is determined by the width of the notch, which is possible because of the special form cutter of the instrument. The measurement is performed by any portable measuring microscope with a suitable measuring range and discreteness. Coating Thickness Knife Tester TPN-2808 (Paint Inspection Gauge) complies with ISO 2808, ASTM B 4138, DIN EN 1071-2.

Coating Thickness Knife - Feature

Instrument allows users to determine the thickness of each layer individually for multilayer coatings.

Add to basket
1
Ultrasonic Thickness Gauge | UT-1M
R14,512.00 – R20,205.00 ex vat
Ultrasonic Thickness Gauge - Overview

The Ultrasonic Thickness Gauge UT-1M is used for operational non-destructive testing of the thickness of products with one-way access. The method is based on the property of the materials to conduct the ultrasound. Ultrasonic waves are excited by the piezoceramic plate in the transducer, then penetrate into the material through the couplant, and is then reflected from the bottom surface of the tested sample and returns to the transducer. Based on the obtained sound transit time in the material, the device calculates the thickness in accordance with the velocity of propagation of ultrasonic waves in the test sample. The thickness value is displayed on the device’s display. The measurement process takes about 1 second.

Ultrasonic Thickness Gauge - Features
- Wide range of measuring thicknesses
- Fixation of the last measurement result in the removal of the transducer surface
- Graphic display with backlight
- Select the type of probe through a single button
- Mapping the presence of acoustic coupling on the graphic display
- The preset velocity of ultrasound
- Minimum number of controls
- Compensation of probe delay
- Convenience and ease in operation
https://www.youtube.com/watch?v=5Ox684sHbw8

Select options