Network Analyser

A Network Analyser measures and records electrical parameters. For consumption analysis, monitoring and control of the power infrastructure network. These performance metering & monitoring devices provide all of the measurements needed to complete energy efficiency projects and to assure the monitoring of electrical distribution.

Measurement of all the main parameters is required for an effective consumption analysis including power factor, current, voltage, power (total and per phases), harmonics, THD, etc.

Three-Phase Network Analyser Kit | UPM309RGW
R14,544.00 – R22,880.00 ex vat
Three-Phase Network Analyser Kit - Overview

This kit is used for the measurement and recording of the electrical parameters. It is suitable for consumption analysis and control and has an excellent quality/price ratio. The UPM309 power meter is the ideal instrument for establishing the measurement points on the plant and can be managed remotely. Data generated creates consumption profiles, recorded values trends, alarms and events reports, costs calculation as well as critical values identification. The Kit consists of a network analyser and 3 Rogowski coils. The use of Rogowski coils for current measurement allows quick installation on existing plants. The instrument can also be fit for the current consumption without replacing the transducer.

Three-Phase Network Analyser Kit - Features
- DIN 96x96 ultra-compact version, only 39 mm depth
- Fully bi-directional four-quadrant measurements
- Main electrical parameters measured and displayed
- 4 available KITs: 30, 45, 70, 90 cm coil length
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording
- Can record all energy counters
- Up to 24 parameters selectable
- MODBUS RTU communication by RS485 port / MODBUS TCP communication by Ethernet port
- Can manage the instrument in remote mode with WintoolNET software or by Web interface
- 2 digital outputs, 1 digital input
- Accuracy class 0.5 according to IEC/EN 61557-12 for active power/energy
Select options
3-Phase Network Power Analyzer 4 Din Module | UPM209RGW
R13,760.00 – R20,225.00 ex vat
3-Phase Network Power Analyzer - Overview

The UPM209 is an innovative instrument for measuring and recording of electrical parameters. Particularly suitable for consumption analysis and control, with excellent value for money. The connections are quick and easy, and very useful for energy audits or retrofitting applications on existing switchboards. UPM209 is the ideal instrument to establish the measurement points on the plant.

The instruments can communicate through the RS485 serial port by Modbus RTU/ASCII protocol or through Ethernet port by Modbus TCP protocol. Furthermore, wintoolnet software is available for remote instrument management. A web interface is also available. This very useful function allows one to manage the instrument via a PC connection.

3-Phase Network Power Analyzer - Features
- 4 DIN modules compact version
- Fully bi-directional four quadrants measurements for all energies and powers
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- 4 available KITs: 30cm Ø 10cm, 45cm Ø 14cm, 70cm Ø 22cm, 90 cm Ø 29cm
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording
- Possibility to record all energy counters
- Up to 24 parameters selectable among real-time measurements for MIN/AVG/MAX recording
- MODBUS RTU/ASCII communication by RS485 port with Digital Output and remote management with WintoolNET
- MODBUS TCP communication by Ethernet port and remote management with Webserver
Datasheet

Select options
Three-phase Network Analyzer | UPA20
R4,426.00 ex vat
Three Phase Network Analyzer -Overview

UPA20 is a three-phase network monitoring device that provides the measurements needed to complete energy efficiency projects and to assure the monitoring of an electrical distribution network. The instrument is easy to use with its large backlit multiple-display screen with 4 hotkeys. It is particularly suitable for consumption analysis and control, with an excellent quality/price ratio and provided with a correction function for CT wiring errors.

The Three-phase network analyser can be equipped with additional modules that give flexibility. Modules for RS485 communication and additional digital inputs/outputs can be used to increase its range of functionality. The instrument is compliant with IEC 61557-12. It guarantees performance levels from the PMDs under the environmental conditions typical of industrial and tertiary applications.

Three-phase Network Analyzer - Features
- Wiring error detection
- DIN 96x96 compact version
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- For current transformers (not included)
- Available optional plug-in modules for communication, inputs/outputs
- Active energy class 0,5 S according to IEC 62053-22
- Compliant with IEC 61557-12, the reference standard for PMDs (Performance Metering & monitoring Devices)
- UL listed product - UL no. E231725
Add to basket
Three phase Power Monitoring Devices for Industrial Environment | UPA30
R7,529.00 – R12,765.00 ex vat
Three-phase Power Monitoring Devices - Overview

UPA30 is a performance metering & monitoring device that provides all of the measurements needed to complete energy efficiency projects and to assure the monitoring of electrical distribution. Particularly suitable for consumption analysis and control, with an excellent quality/price ratio. The instrument is easy to use due to its large backlit multiple-display screen with 6 hotkeys. With correction function for CT wiring errors. The three-phase Power Monitoring Device can be equipped with additional modules making it a flexible product. Modules for RS485 communication, additional digital or analogue inputs/outputs and temperature detection can be used to increase its range of functionality. The Power Monitoring Device is compliant with IEC 61557-12. It is designed for performance from the PMDs under the environmental conditions typical of industrial and tertiary applications.

Three-phase Power Monitoring Devices - Features
- DIN 96x96 compact version
- User-friendly operation
- Optional plug-in modules for communication, inputs/outputs, temperature
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- For current transformers (not included)
- Programmable VT
- Wiring error detection
- Display of predictive power values
- Active energy class 0,5 S according to IEC 62053-22
- Compliant with IEC 61557-12, the reference standard for PMDs (Performance Metering & monitoring Devices)
- UL listed product - UL no. E23172
Select options
3 Phase Network Analyzer with DIN Display | UPM309RGW
Call for price
3 Phase Network Analyser with Rogowski coils - Overview

UPM309 is an innovative instrument for the measurement and recording of electrical power parameters. It is particularly suitable for consumption analysis and control, with an excellent quality/price ratio. Connections are quick and easy, useful for retrofitting applications on existing switchboards or for an energy audit.

UPM309 is the ideal instrument to establish the measurement points on the plant. The instrument communicates with an RS485 serial port by MODBUS RTU/ASCII protocol or through an Ethernet port by MODBUS TCP protocol.

Furthermore, it is available with WintoolNET software for remote management. The web interface is also available with an Ethernet port option: a very useful function that gives the option to manage the instrument by any PC connected to the network.

3 Phase Network Analyser with Rogowski coils - Features
- DIN 96x96 ultra-compact version, only 39 mm depth
- Fully bi-directional four quadrants measurements for all energies and powers
- Up to 24 parameters selectable among real-time measurements for MIN/AVG/MAX recording (ENH version)
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- 4 available KITs: 30, 45, 70, 90 cm
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording (ENH version)
- Record all energy counters (ENH version)
- MODBUS RTU/ASCII communication by RS485 port
- MODBUS TCP communication by Ethernet port
- Possibility to manage the instrument in remote mode by WintoolNET software or by the Web server interface
- 2 digital outputs, 1 digital input, 1 analogue output (optional)
Read more