Category: Electrical Installation Meter

Electrical Installation Meter

A Multi-functional Electrical Installation Meter is used to perform complete testing and verification of safety in electrical installations.

  • Multi-function Electrical Installations Meter MPI-536

    Multi-function Electrical Installations Meter | MPI-536

     R59,191.00 ex vat

    Multi-function Electrical Installations Meter - Overview

    The Sonel MPI-536 meter is designed for checking home and industrial electrical installations. The instrument allows the user to make a set of measurements to check protection against electric shock using a single universal device. The meter offers a wide range of functionalities, combining the measuring capabilities of several devices while ensuring equally good accuracy:

    • Short circuit loop impedance (also in circuits secured with RCDs)
    • RCD parameters
    • Insulation resistance
    • Earth resistance (4 measurement methods + soil resistivity measurement)
    • Continuity of protective and equipotential bondings
    • Light intensity measurement
    • Phase sequence test
    • Motor rotation direction test
    • Auto mode of residual current devices (RCD) tests
    • Auto measurements – freely configurable measuring sequences
    • Auto ISO-1000C adapter for automatic insulation resistance test of 3-, 4- and 5-conductor cables, without switching

    Multi-function Electrical Installations Meter Features

    • Color TFT LCD touch screen, 800x480 pixels and a diagonal of 7”
    • Stylus included allows work with dielectric gloves
    • Built-in help system
    • Rugged housing - IP51
    • Communication via USB, SD memory card, and Bluetooth/Wi-Fi
    • Sonel Reports PLUS software

     

    Add to basket

  • MPI-520 _ Multifunction Electrical Installations Meter Sonel

    Electrical Installation Multi-function Meter | MPI-520

     R40,877.00 ex vat

    Safety Rating Cat III at 600V labelSafety Rating Cat IV at 300V labelIP54 Label

    Electrical Installation Multi-function Meter - Overview

    The Electrical Installation Multi-function Meter MPI-525 is dedicated to performing the diagnosis of electrical installations according to IEC 61557 standards. The device is designed to measure the impedance of a short circuit loop also without triggering RCD, parameters of RCD, insulation resistance, earthing resistance, continuity, and also for phase sequence testing. Furthermore it measures and logs AC voltage and current, frequency, and power. A wide range of standard accessories enables one to perform all necessary measurements and safety tests. The MPI-520 is equipped to perform a complete test and verify electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671).

    Datasheet

    Add to basket

  • Multifunction Electrical Installation Meter MPI530

    Electrical Installation Multi-function Meter | MPI-530

     R45,427.00 ex vat

    Safety Rating Cat III at 600V labelSafety Rating Cat IV at 300V labelLux Class AIP51 LabelBluetooth label

    Electrical Installation Multi-function Meter - Overview

    The Electrical Installation Multi-function Meter MPI-530 is an instrument for electric shock protection measurements. It includes the option of various  earthing and earthing resistance measuring methods. Additionally, the meter enables its user to analyse power supply parameters, and record and display them on its screen. The instrument automatically measures the insulation resistance in a socket and 3 -, 4 - and 5-wire cables when used with an AutoISO-1000C adapter. Measurement results may be continuously verified, depending on the user’s demand or according to binding regulations. The memory of the instrument may store tens of thousands of measurements allowing users to store them in a structure of a protocol and describe individual measurement points.

    Datasheet

    Add to basket

  •  4
    PV Electrical Installation Meter MPI-540-PV

    PV Electrical Installation Meter | MPI-540-PV

     R91,644.00 ex vat

    Safety Rating CAT II at 1000V LabelSafety Rating CAT III at 500V LabelSafety Rating Cat IV at 300V labelLi-Ion Battery labelIP51 LabelBluetooth labelWiFi label

    PV Electrical Installation Meter - Overview

    The PV Electrical Installation Meter is an extremely versatile meter particularly designed for testing photovoltaic installations. This device allows for a complete set of tests on the DC and AC sides, in accordance with the guidelines of EN 62446 standard. The measured parameters, related to photovoltaic installation, are automatically converted to STC (Standards Test Conditions) reference by the device. Measurements of voltages, current, and power on the AC and DC side of the inverter allow verifying its efficiency. Sonel Reports PLUS software enables creating PV installation test reports with measurement results saved meter’s in memory.

    PV Electrical Installation Meter - Features

    • Li-Ion battery
    • Energy cost calculator
    • Auto measurements
    • Parameters measured in accordance with class S of EN 61000-4-30 standard
    • Measurement of photovoltaic installations according to EN-62446 standard
    • Photovoltaic installation test report with Sonel Reports PLUS software
    • Three-phase power recorder
    • Real-time display of network parameters
    • Quick measurement of the fault loop impedance in networks secured with RCD without triggering
    • Measurement of all parameters related to earthing and protection against electric shock
    • Fast path from measurements to report
    • Large touch screen 7"
    • Removable microSD memory card

    https://www.youtube.com/watch?v=TyPfIdV5mDo

     

    Add to basket

  • Multifunction Electrical Installation Meter

    Multi-function Meter (ISO Test Voltage 2500V) | MPI-525

     R52,798.00 ex vat

    Safety Rating Cat III at 600V labelSafety Rating Cat IV at 300V labelIP54 Label

    Multi-function Meter -  Overview

    The Electrical Installation Multifunction MPI-525 is equipment to perform complete tests and verify electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). It is an instrument for measuring electric shock protection, earthing, and earthing resistance with a test voltage of up to 2500V.

    Multi-function Meter -  Features

    • Short-circuit loop measurement:
      • Impedance measurement with 23 A current (44 A phase-to-phase) - short-circuit resistor R=10
      • Measurement range: 95 - 440 V, frequency 45...65 Hz
    • Short-circuit loop measurement with resolution 0,01, in distribution network without triggering RCD (In30 mA):
      • Automatic calculation of short-circuit, detection of phase voltage and phase-to-phase voltage
      • Additional UNI-Schuko plug for automatic measurement, AGT adapter for 3 phase network measurement
    • Testing of general and selective RCD with the rated differential current of 10,30,100,300,500 and 1000 mA. (Type AC, A and B)
    • Measurement of insulation resistance:
      • Test voltage 250 V, 500 V, 1000 V, 2500 V
      • Measurement range up to 10G
      • Automatic discharging after measurement
      • Automatic measurement of all resistances in 3,4,5-wire cables using optional adapter AUTO-ISO
      • Acoustic signals in 5 sec intervals for insulation resistance characteristic
      • Elapsing T1, T2, T3 times (0...600 s) form measurement of absorption coefficients (DAR, PI or Ab1, Ab2)
      • Safety measurement - protection against overvoltage
    • Measurement of earthing resistance
    • Bi-directional testing of PE wire continuity using 200 mA current
      • Autocalibration of test leads
    • Phase sequence testing
    • Memory is divided into 10 memory banks each of them containing 99 memory cells
    • Battery charge indicator
    • AUTO-OFF function
    • USB interface

    Datasheet

    Add to basket

  • Multifunctional Electrical Installations Meter MPI-507

    Multifunctional Electrical Installations Meter | MPI-507

     R30,874.00 ex vat

    Multifunctional Electrical Installations Meter - Overview

    The MPI-507 is used for precise measurements of electrical installation parameters. Its sleek, compact and ergonomic design holds a wealth of measurement functions.  Although it is one of the smallest multifunction meters on the market, it surprises one with its versatility, intuitive operation, and extended capabilities.  It has been designed for specialists in the installation and electrical industries, as well as for professional measuring engineers. Its main advantage is the quick measurement of fault loop impedance in circuits with RCD. It measures short-circuit loop parameters, insulation resistance, the resistance of protective and equalising connections, earth resistance, as well as the testing of residual current devices (RCD) of type AC and A. The functions are selected with a rotary switch. Additional parameters are set with buttons located on the housing interface. It is easy to use and priced very competitively.  The device settings are saved automatically even when the battery is completely discharged. The backlit display and buttons make it suitable for use in low light. The large memory eliminates the need for taking notes during the measurements. It is suitable for inspecting the safety of electrical systems in households and industrial facilities. Its housing is robust and weather-resistant with an IP67 rating. Bluetooth wireless communication allows easy transfer of data. Use Sonel Reports PLUS software to generate a report on measurements for electric shock protection. Saving the downloaded data to the simplest formats and printing is provided by free Sonel Reader software.

    Multifunctional Electrical Installations Meter - Features

    • Measurement of short circuit loop parameters
    • Testing RCD breakers of AC, A types
    • Earth resistance measurement
    • Insulation resistance measurement
    • Measurement of resistance of protective conductors and bondings
    • Phase sequence indication

     

    https://www.youtube.com/watch?v=QdvaEHW-JvM

    Add to basket

  • Electrical Installation Meter Sonel MPI-535

    Electrical Installation Multi-function Meter | MPI-535

     R40,890.00 ex vat

    Electrical Installation Multi-function Meter - Overview

    The MPI-535 meter is designed for checking industrial and home electrical installations. The measurements taken by the device, determine the safety of the installation. In addition, the user has the option to register the parameters of electrical networks located at these facilities. This allows for the measurement of the parameters of protection against electric shock using a single universal device while verifying the quality of electricity. The Auto mode allows significant automation of measurements of the meter and makes it possible to test the functioning of residual current circuit breakers, as well as in pre-programmed measuring sequences, which can be extended with their own sequences. Automatic measurement of insulation resistance of 3-, 4- and 5-wire conductors is possible by using an additional AUTO ISO-1000C adapter.

    Datasheet

    Add to basket

  • Electrical Installation Meter Sonel MPI-

    Multi-function Electrical Installation Meter | MPI-506

     R26,737.00 ex vat

    Safety Rating Cat IV at 300V labelSafety Rating Cat III at 600V labelBluetooth labelIngress protection IP67 label

    Multi-function Electrical Installation Meter - Overview

    This Multifunctional Electrical Installations Meter performs complete tests and verifies electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). The test includes various short circuit loop impedance tests, multiple RCD breaker tests, low voltage resistance measurements of protective circuits, voltage measurements, and frequency measurements.

    Multi-function Electrical Installation Meter - Features

    Measurement of short circuit loop parameters

    • Measurement of short circuit loop impedance in networks with rated voltage: 220/380 V, 230 V/400 V, 240/415 V and frequency 45 - 65 Hz, operating voltage range: 180 - 460 V
    • Indication of short circuit loop resistance R and short circuit loop reactance X
    • Measurements of short circuit loop impedance with 15 mA current, without tripping the RCD circuit breaker
    • Maximum test current: 7.6 A (at 230 V), 13.3 A (at 400 V)

    Testing RCD breakers of AC, A types

    • Testing of prompt, short-delay and selective RCDs with rated current values 10 | 15 | 30 | 100 | 300 | 500 mA
    • Measurement of IA trip current and tripping time tA for currents 0.5 IΔn, 1 IΔn, 2 IΔn, 5 IΔn • RE and UB measurement without RCD tripping
    • The extended AUTO function of RCD measurement, with the possibility of measuring ZL-PE with low current
    • Measurement of IA and tA during one RCD tripping

    Insulation resistance measurement

    • Test voltage 100 V, 250 V, 500 V

    Measurement of resistance of protective conductors and equipotential bondings

    • Measurement of protective connections continuity with a ±200 mA current in accordance with EN 61557-4
    • Autocalibration of test leads - any leads can be used
    • Low current resistance measurement with sound signalling

    Phase sequence indication

    Additional functions

    • Checking the correctness of PE connection using a contact electrode
    • Measurement of voltage (0 - 500 V) and network frequency
    • The memory of 990 results, wireless data transmission to a computer
    • Backlit keypad

    Datasheet

    Add to basket

  •  1
    Profile Picture Multifunction Electrical Installation Meter

    Multi-function Electrical Installations Meter | MPI-502F

     R20,344.00 ex vat

    Safety Rating Cat IV at 300V labelSafety Rating Cat III at 600V labelIngress protection IP67 label

    Multi-function Electrical Installations Meter - Overview

    This Multi-functional Electrical Installations Meter tests and verifies electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). Tests include various short circuit loop impedance tests, multiple RCD breaker tests, low voltage resistance measurements of protective circuits, voltage measurements, and frequency measurements.

    Multi-function Electrical Installations Meter Features

    • Short circuit loop parameters measurements:
      • measurements of short circuit loop impedance in networks with rated voltage: 220/380 V, 230 V/400 V, 240/415 V and frequency 45...65 Hz
      • measurements of short circuit loop impedance with current 15 mA without tripping the circuit breaker
    • Testing the RCD breakers of AC, A types:
      • testing of prompt, short-delay (general) and selective RCDs for the rated current values 10, 30, 100, 300, 500 mA
      • IA measurement
      • RE and UB measurement without tripping the circuit breaker
      • extended RCD test function AUTO, with measurement of ZL-PE with current 15 mA - measurement of IA and tA during one RCD tripping.
    • Detection of the replacement L and N in the socket and automatic conversion in the meter
    • Low voltage resistance measurements of protective circuits and junctions:
      • measurement of resistance with ±200 mA current
      • calibration of test leads - possibility of using any length of test leads
      • low current resistance measurement with acoustic signalling
    • Rapid check for the correct connection of PE wire using touch electrode
    • Measurement of mains voltage and frequency
    • Power supply from LR6 batteries or NiMH accumulators (option)
    • The device meets the requirements of IEC 61557 standard
    • measurement category: IV 300 V (III 600 V) according to EN 61010 - 1
    • protection class acc. to EN 60529: IP67

    Add to basket

  • Phase Sequence tester

    Phase Sequence and Motor Rotation Tester | TKF-13

     R3,949.00 ex vat

    Safety Rating Cat III at 600V label

    Phase Sequence and Motor Rotation Tester - Overview

    The TKF-13 tester is a modern, high-quality, simple and safe phase sequence or motor rotational tester. However, it is recommended to acquaint oneself with the manual to avoid measuring errors and prevent possible problems related to the meter's operation.

    Phase Sequence and Motor Rotation Tester - Features

    • Type of insulation: double, according to EN 61010-1
    • Safety category: CAT III 600V acc. to EN 61010-1
    • Ingress Protection class acc. to EN 60529: IP42
    • Rated phase-to-phase voltage range: 120... 690 V AC
    • Maximum operation phase-to-phase voltage: 760 V AC
    • EMF motors voltage range: 1...760 V AC
    • Frequency range: 2...70 Hz
    • Diode flashing time of battery state: approx. 1 s
    • Function auto-off: 5 min

    Add to basket

  • Phase Sequence Tester TKF-12

    Phase Sequence Tester | TKF-12

     R2,256.00 ex vat

    Safety Rating Cat III at 600V label

    Phase Sequence Tester  - Overview

    The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

    Phase Sequence Tester - Features

    • Type of insulation: double, according to EN 61010 - 1
    • Safety category: CAT III 600 V acc. to EN 61010 - 1
    • Ingress protection class acc. to EN 60529: IP42
    • rated phase-to-phase voltage range: 120...690 V AC
    • maximum operation phase-to-phase voltage: 760 V AC
    • frequency range: 10...70 Hz
    • power supply: from the tested electrical installation, up to 15 min for max. voltage

    Add to basket

  •  4
    Multi-function Electrical Installation Meter MPI-540

    Multi-function Electrical Installation Meter | MPI-540

     R63,214.00 – R104,542.00 ex vat

    Multi-function Electrical Installation Meter - Overview

    The MPI-540 meter has models for home and industrial electrical installations, photovoltaic installations and vehicle charging stations. Measurements taken by these devices determine the safety of the installation. The user also has the option to register the parameters of the electrical network's location.

    Verification of the quality of electricity and measurement of the parameters that protect against electric shock is easy with this single, universal device. This superior meter combines the measurement capabilities of several devices while ensuring quality and accuracy. Significant automation of measurements with the meter makes it possible to test functioning of residual current circuit breaker in the auto mode, as well as in pre-programmed measuring sequences (so-called auto-tests), which can also be extended with your own sequences. Automatic measurement of insulation resistance of 3-, 4- and 5- wire conductors is possible by using additional the AUTO ISO-1000C adaptor.

    This device is ideal for all measurements for the commissioning of electrical installations in accordance with applicable regulations.

    Multi-function Electrical Installation Meter - Features

    • 7 " TFT LCD touch screen with a resolution of 800 x 480 pixels
    • Removable memory card - easy increase of memory capacity
    • One device can be used for all measurements for commissioning of electrical installations in accordance with applicable regulations:
      • short circuit loop impedance (also in circuits with RCDs)
      • parameters of RCDs
      • insulation resistance
      • earthing resistance (4 measurement methods + ground resistivity measurement)
      • continuity of protective and equipotential bondings
      • lighting measurement
      • phase sequence tester
      • motor rotation direction tester
    • three-phase power network data logger can record 50/60 Hz power network parameters in acc. to S class of EN 61000-4-30:
      • voltage L1, L2, L3, - average values in the range up to 500 V,
      • L1, L2, L3 currents, - average values, current measurement in the range up to 3 kA (depending on the current clamps used)
      • frequency in the range of 40Hz - 70Hz
      • active (P), reactive (Q) and apparent (S) power
      • power factor (PF), cosφ
      • harmonics (up to 40 in voltage and current)
      • total harmonic distortion (THD) for current and voltage

    https://www.youtube.com/watch?v=y6kt_aElw58

     

    CONTACT US FOR MORE OPTIONS

    Select options

  •  1
    Multi-function Electrical Installation Meter MPI-540

    Electrical Installation Meter with Power Analyzer | MPI-540

     Call for price

    Safety Rating CAT III at 500V LabelSafety Rating Cat IV at 300V labelLi-Ion Battery labelIP51 LabelBluetooth labelWiFi label

    Electrical Installation  Meter - Overview

    The MPI-540 meter is designed for checking the safety of industrial and domestic electrical installations. The user has the option to register the parameters of electrical networks located at these facilities. This allows for the measurement of the parameters for protection against electric shock using a single universal device while verifying the quality of electricity. The Auto mode allows significant automation of measurements of the meter and makes it possible to test the functioning of residual current circuit breakers, as well as in pre-programmed measuring sequences, which can be extended with their own sequences. Automatic measurement of insulation resistance of 3-, 4- and 5-wire conductors is possible by using an additional AUTO ISO-1000C adapter.

     

    Read more