Category: Megohmmeters

Megohmmeters

  • 15kV Insulation Resistance meter MIC15k1 - Sonel

    15kV Insulation Resistance meter | MIC15k1

    Call for price

    Bluetooth labelIP67 LabelIP40 Label

    15kV Insulation Resistance meter MIC15k1 Overview

    The MIC-15k1 meter is designed to measure the insulation resistance of power objects, i.e. single- and multicore cables, transformers, motors and generators, capacitors, switches, and other devices installed in power stations. It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.

    15kV Insulation Resistance meter MIC15k1 Features

    • Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with the partial discharge (PD) indicator for every each of these measurements.
    • It allows testing the electrical durability of the tested object - breakdown voltage indication.
    • High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
    • The function of smooth voltage rise in time (RT - Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
    • Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
      • visual method (if power cables are visible along the entire length),
      • reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate the direction of the fault (the conductor must be buried in the ground with earth direct contact).
    • Compatible with external software.

    Datasheet

  • Mega Ohm meter | MIC-10

    R6,712.00

    Safety Rating Cat IV at 600V label Safety Rating Cat III at 1000V labelIngress protection IP67 label

    Mega Ohm meter MIC-10  Overview

    MIC-10 meter is designed to perform electrical tests, which establishes the safety of insulation in a systems. This is a very handy digital multimeter tool,  measuring Insulation resistance up to 10GOhms with up to 1000V measuring in accordance with IEC61557-2.

    Mega Ohm meter Mic-10 Features

    • continuous indication of insulation resistance or leakage current,
    • select test voltages of: 50, 100, 250, 500, 1000 V,
    • automatic discharge of capacitance of tested object after the insulation resistance measurement,
    • acoustic signalling of five-second periods to facilitate obtaining time characteristics,
    • indication of actual test voltage during the measurement,
    • protection against measuring live objects,
    • three-lead measurement.
    • Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with  >200 mA current
    • Low-voltage circuit continuity and resistance measurement:
    • circuit resistance measurement (<1999 ) with the <15 mA current,
    • quick sound signal if circuit resistance is below 30Ω.
    • Capacitance measurement during the RISO measurement
    • Measurement of alternating and direct voltages in the 0...600 V range.
    • Power supply: 4 AA disposable or rechargeable batteries, monitoring of power supply voltage.
    • Meter conform to EN 61557.
  • 10kV Insulation Resistance meter up to 40 Tera-Ohm | MIC10k1

    Call for price

    IEC 61557 label Safety Cat IV at 600V label Safety Cat III at 1000V label Bluetooth Enabled label Ingress protection IP40 label

     

    Megohmmeter - 10kV up to 40 Tera Ohms MIC 10k

    This insulation resistance meter has digital filters function for measurements in high noise environment.  Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 with current > 200 mA.  Adjustable limits for measured resistance RISO and RCONT. Measurement of leakage current during insulation resistance testing. DC and AC voltage measurement in the range of  0...750 V. Drawing graphs on the display during measurement. Innovative  memory  with possibility of description of:  measurement points,  facilities,  names  of  customers. Operating with mini Bluetooth keyboard (option). MIC-10s1 - Stable measurements in noisy environments such as 765 kV substations. Graphic LCD 5,6'’ backlit. Keyboard backlit. Power supply from battery packs. Built-in fast charger. The instruments meet the requirements of the EN 61557 standard.

    10 kV Insulation Resistance Meter Features

    • clear visible display
    • measurement voltage any in the range of: 50…10000 V (50...1000 V at 10 V and 1...10 kV at 25 V),
    • continuous indication of measured insulation resistance or leakage current,
    • automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement,
    • acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics,
    • adjustable measuring time to 99'59'’,
    • metered T1, T2 and T3 test times for measuring one or two absorption coefficients from the range of 1…600 s,
    • polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement,
    • indication of actual test voltage during measurement,
    • 1.2 mA, 3 mA and 5 mA test current,
    • insulation resistance measurement using two- or three-wire method,
    • measurements with test leads up to 20 m...
    • protection against measuring live objects,
    • automatic measurement of multiple core cables with the additional AutoISO-5000 adapter (for MIC-10k1 max. voltage 5 kV)
    • measurement of capacitance during the measurement of RISO.
    • measurement of temperature (with additional probe - WASONT1),
    • step voltage insulation resistance measurement (SV),
    • Dielectric Discharge calculation (DD),
    • location of damage (burnout),
  • Profile Picture Insulation Resistance Meter

    Insulation Resistance Meter 5kV | MIC-5050

    Call for price

    IEC 61557 label Safety Cat IV at 600V label Safety Cat III at 1000V label Bluetooth Enabled label Ingress protection IP40 label

    Insulation resistance meter - 5kV up to 20 Tera Ohms

    This insulation resistance meter has digital filters function for measurements in high noise environment.  Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 with current > 200 mA.  Adjustable limits for measured resistance RISO and RCONT. Measurement of leakage current during insulation resistance testing. DC and AC voltage measurement in the range of  0...750 V. Drawing graphs on the display during measurement. Innovative  memory  with possibility of description of:  measurement points,  facilities,  names  of  customers. Operating with mini Bluetooth keyboard (option).
    Graphic LCD 5,6'’ backlit. Keyboard backlit. Power supply from main power line or battery packs. Built-in fast charger. The instruments meet the requirements of the EN 61557 standard.

    Insulation Resistance Meter Features

    • measurement voltage any in the range of: 50...5000 V (50...1000 V at 10 V and 1...5 kV at 25 V),
    • continuous indication of measured insulation resistance or leakage current,
    • automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement,
    • acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics,
    • adjustable measuring time to 99'59'’,
    • metered T1, T2 and T3 test times for measuring one or two absorption coefficients from the range of 1…600 s,
    • polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement,
    • indication of actual test voltage during measurement,
    • 1.2 mA, 3 mA and 5 mA test current,
    • insulation resistance measurement using two- or three-wire method,
    • measurements with test leads up to 20 m...
    • protection against measuring live objects,
    • automatic measurement of multiple core cables with the additional AutoISO-5000 adapter
    • measurement of capacitance during the measurement of RISO.
    • measurement of temperature (with additional probe - WASONT1),
    • step voltage insulation resistance measurement (SV),
    • Dielectric Discharge calculation (DD),
    • location of damage (burnout),
  • 2500V Insulation Resistance meter in case laid out on the ground

    MIC-2501 Insulation Resistance Tester/Meter

    Call for price

    MIC-2501 Insulation Resistance

    A very handy tool for measuring Insulation resistance with up to 2500V It can measure up to 1TOhms in accordance with IEC61557-2. Comes with confenient carry case with straps to free up your hands during operations.

    Insulation resistance 2500V Features:

    • selectable voltage in the 100…2500 V range with 100 V step,
    • continuous indication of insulation resistance or leakage current,
    • automatic discharge of capacitance of tested object after the insulation resistance measurement,
    • acoustic signalling of five-second periods to facilitate obtaining time characteristics,
    • measured test times T1, T2 i T3 to measure one or two absorption coefficients in 15, 60 and 600 s,
    • indication of actual test voltage during the measurement,
    • protection against measuring live objects,
    • two and three-lead measurement method,
    • Continuity measurement of protective and equi-potential conductors according to EN 61557-4
    • with the >200 mA current.
    • Leakage current measurement.
    • Alternating and direct voltages in the 0...750 V range.
    • Built-in rechargeable battery pack.
    • The instruments meet the requirements of the EN 61557 standard.
    • Charge from car lighter (12 V) socket (additional accessories).