Tag: Motor Rewinding

Motor Rewinding

  •  2
    Mega Ohm meter MIC-10

    Mega Ohm Meter | MIC-10

     R10,492.00 ex vat

    Safety Rating Cat IV at 600V label Safety Rating Cat III at 1000V labelIngress protection IP67 label

    Mega Ohm Meter - Overview

    The MIC-10 meter is designed to perform electrical tests, which establish the safety of insulation in systems. This is a very handy digital multimeter tool,  measuring insulation resistance up to 10GOhms with up to 1000V measuring in accordance with IEC61557-2.

    Mega Ohm Meter - Features

    • Continuous indication of insulation resistance or leakage current
    • Select test voltages of: 50, 100, 250, 500, 1000 V
    • Automatic discharge of capacitance of tested object after the insulation resistance measurement
    • Acoustic signalling of five-second periods to facilitate obtaining time characteristics
    • Indication of actual test voltage during the measurement
    • Protection against measuring live objects
    • Three-lead measurement
    • Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with  >200 mA current
    • Low-voltage circuit continuity and resistance measurement
    • Circuit resistance measurement (<1999 ) with the <15 mA current
    • Sound signal if circuit resistance is below 30Ω
    • Capacitance measurement during the RISO measurement
    • Measurement of alternating and direct voltages in the 0...600 V range
    • Power supply: 4 AA disposable or rechargeable batteries, monitoring of power supply voltage
    • Meter conforms to EN 61557

    Add to basket

  •  4
    Pyrometer Infrared Thermometer DIT-500

    Pyrometer Infrared Thermometer | DIT-500

     R8,950.00 ex vat

    Pyrometer Infrared Thermometer - Overview

    Professional and compact infrared thermometers are a solution for problems where specific thermal conditions are required. The intuitive one-handed operation of the device and the ergonomically designed gun-type housing allow for trouble-free daily work. Infrared is used to determine the surface temperature of the tested object. The optical system of the instrument detects the radiation that is emitted, reflected and transmitted, then gathers it and focuses it in the detector. The electronic system converts the optical data into a temperature value. To increase the precision of measurement and facilitate targeting, the device is equipped with a laser pointer.

    Pyrometer Infrared Thermometer - Features

    • Precise
    • Non-contact temperature measurement
    • Type K temperature measurement
    • Ergonomic gun-type housing
    • Resolution 0.1°F (0.1°C)
    • Emissivity digitally adjustable from 0.10 to 1.00
    • °C/°F switch
    • Automatic range selection
    • High and low alarm
    • DATA HOLD function for holding measured values
    • Temp display max, min, average and difference
    • Trigger lock
    • AUTO-OFF function
    • Rapid reaction to temperature changes (below 150 ms)
    • Double laser sight (determination of the measurement area)
    • Data memory (LOG) for 100 measurements
    • Transmission of current readings to computer via USB cable
    • Backlit LCD display

    Add to basket

  • Phase Sequence tester

    Phase Sequence and Motor Rotation Tester | TKF-13

     R3,949.00 ex vat

    Safety Rating Cat III at 600V label

    Phase Sequence and Motor Rotation Tester - Overview

    The TKF-13 tester is a modern, high-quality, simple and safe phase sequence or motor rotational tester. However, it is recommended to acquaint oneself with the manual to avoid measuring errors and prevent possible problems related to the meter's operation.

    Phase Sequence and Motor Rotation Tester - Features

    • Type of insulation: double, according to EN 61010-1
    • Safety category: CAT III 600V acc. to EN 61010-1
    • Ingress Protection class acc. to EN 60529: IP42
    • Rated phase-to-phase voltage range: 120... 690 V AC
    • Maximum operation phase-to-phase voltage: 760 V AC
    • EMF motors voltage range: 1...760 V AC
    • Frequency range: 2...70 Hz
    • Diode flashing time of battery state: approx. 1 s
    • Function auto-off: 5 min

    Add to basket

  • Phase Sequence Tester TKF-12

    Phase Sequence Tester | TKF-12

     R2,369.00 ex vat

    Safety Rating Cat III at 600V label

    Phase Sequence Tester  - Overview

    The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

    Phase Sequence Tester - Features

    • Type of insulation: double, according to EN 61010 - 1
    • Safety category: CAT III 600 V acc. to EN 61010 - 1
    • Ingress protection class acc. to EN 60529: IP42
    • rated phase-to-phase voltage range: 120...690 V AC
    • maximum operation phase-to-phase voltage: 760 V AC
    • frequency range: 10...70 Hz
    • power supply: from the tested electrical installation, up to 15 min for max. voltage

    Add to basket

  • Cropico DO4000 MilliOhm Meter

    Cropico DO4000 MilliOhm Meter

     R20,480.00 ex vat

    Cropico DO4000 MilliOhm Meter - Overview

    This portable milliohm meter is a practical digital instrument measuring low resistance. Suitable for use in multiple industries, workshops, field or test labs such as in Aerospace, Automotive, Manufacturing, Military, and Utilities. This milliohm meter is of rugged construction and contained in a sturdy plastic case with easy-to-use buttons. The Series 4000 has many advanced features including auto-ranging, forward and reverse current measurement with auto average, true current zero, protection up to 415 volts rms, digital calibration and long scale length, 4000 count and auto power down to maximise battery life. Supplied with batteries and measuring leads.

    Cropico DO4000 MilliOhm Meter- Features

    • True 4 terminal Kelvin/Thomson principle measurement eliminates lead resistance errors
    • True zero capabilities Buttons to null measurement offsets
    • Digital calibration
    • Open circuit lead warning on display
    • 15mm LCD 4000 count with automatic decimal point and polarity indication
    • Manual Auto Ranging selection
    • Calibration Digital security key protected
    • Removable pack with 5 1.5V non-rechargeable batteries.
    • Separate rechargeable pack, charger and docking station as optional extras
    • Safety EN 61010-1 EMC-EN 61236
    • Forward and Reverse current measurement with auto Averaging to compensate for thermoelectric effect

    https://www.youtube.com/watch?v=N6xrnt2vz1Y

     

    Add to basket

  • MIC-2501 Insulation Resistance Tester/Meter

    MIC-2501 Insulation Resistance Tester/Meter

     R18,539.00 ex vat

    MIC-2501 Insulation Resistance Tester/Meter - Overview

    A very handy tool for measuring Insulation resistance with up to 2500V.  It can measure up to 1TOhms in accordance with IEC61557-2. Comes with a convenient carry case which has straps to free up your hands during operations.

    MIC-2501 Insulation Resistance Tester/Meter - Features

    • Selectable voltage in the 100…2500 V range with 100 V step
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of capacitance of tested object after the insulation resistance measurement
    • Acoustic signalling of five-second periods to facilitate obtaining time characteristics
    • Measured test times T1, T2 i T3 to measure one or two absorption coefficients in 15, 60 and 600 s
    • Indication of actual test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement methods
    • Continuity measurement of protective and equipotential conductors according to EN 61557-4
    • Leakage current measurement
    • Alternating and direct voltages in the 0...750 V range
    • Built-in rechargeable battery pack
    • The instruments meet the requirements of the EN 61557 standard
    • Charge from car lighter (12 V) socket (additional accessories)

    https://www.youtube.com/watch?v=ZKKcoVvN-B8

     

    Add to basket

  •  1
    Thermal Image Camera KT-200

    Thermal Image Camera | KT-200

    Thermal Image Camera - Overview

    The KT-200 thermal camera has a resolution of 192x144 pixels. Its wide temperature measurement range and high-quality lenses guarantee a high level of detail and accuracy in the recorded images. The cameras in this series are available in several variants allowing you to choose the right option for your particular requirements. It is compact and has a large display and is easy to use. The navigation button is supported by a menu on the touchscreen. This model ensures simple and intuitive operation. It not only acts as a Thermal imager as its camera is equipped with visual lenses and related image mixing technologies: PIP, and MIF. Support from the built-in LED torch and laser improves operational quality by facilitating photography and then image interpretation. The built-in report module allows for the preparation and printing out of reports directly from the camera. Built-in communication interfaces ensure constant communication between the camera and the computer or mobile device, also over a wireless network. An ideal tool for both novice users and professional thermographic inspectors.

    Thermal Image Camera - Features

    • high sensitivity of detectors and a wide temperature range
    • comprehensive image analysis tools
    • intuitive user interface
    • IR video recording (on the SD card or computer disc)
    • built-in report module
    • different imaging modes: IR, visual, PIP, MIF
    • built-in visual camera: 5 Mpx
    • built-in: LED torch, laser pointer
    • interfaces: Micro USB2.0, Wi-Fi, Gigabit Ethernet, Mini HDMI, slot microSD

    Read more

  • Standard Programmable Resistor SRP-10G0-10T0

    Standard Programmable Resistor SRP-10G0-10T0

    Standard Programmable Resistor - Overview 

    The SRP-10G0-10T0 calibrator, which has a range from 10GΩ to 10TΩ,  is a source of high resistance which is used as a standard in calibration and testing of analogue and digital insulation resistance meters. The selected resistance can be maintained for a long time under external direct voltage up to 10 000 V, provided that the current in the measuring circuit does not exceed 3 mA. The required resistance is set by the user using the calibrator's touch keypad or via an external PC application. The required value is set automatically thanks to the switching of a precise resistance matrix. The controlling processor calculates the required combination of resistors, ensuring adequate resistance precision.

    Read more