Electrical Supply Network

1
Advanced Industrial Digital Multimeter | CMM-60
R12,861.00 ex vat

Advanced Industrial Digital Multimeter - Overview

The CMM-60 multimeter allows you to record data thanks to the Trend Capture function showing a historical graph from the built-in memory. It is also possible to transfer data and analyse the results in the Multimeter Software. The device facilitates the diagnostics of potential problems covering the operation of industrial automation, electromechanical devices, motors and distribution of electricity. Precise indications, the convenience of use and early detection of irregularities in the operation of machines and devices are the main benefits of having this device in your equipment. All whilst adhering to strict safety requirements during work in industrial conditions.

Advanced Industrial Digital Multimeter - Features
- Colour display with a counting range of up to 50,000 digits
- Allows reading at a wide-angle in poor lighting conditions
- Quickly detect irregularities due to measurement results displayed in graphical form
- Over 14 measurement functions
- Display the value of the constant and variable component or the sum during voltage measurement
- The 4~20mA function for measurement of the control circuits of temperature, pressure, pH or flow sensors
- True RMS for AC voltage and current allows measuring the effective value of distorted waveforms
- Built-in low-pass filter
- Save results of fast 1ms waveforms thanks to the PEAK value measurement function
- Relative measurement function allows elimination of resistance values of test leads
- Display the result of the measurement of the constant and alternating components of the signal simultaneously
- Real-time clock to add date and time of measurement to each sample
- Recalling measurement results from the built-in memory for 2000 measurements
- Registration of maximum and minimum values
- Calculation of the average of current measurements
- Built-in Bluetooth
- HELP function
- Optional strap with a hook
- IP67 protection level
- The rotary switch has been designed for easy handling
- Dedicated lithium-polymer battery
- A dedicated charger and power supply for charging the battery without removing it
"m.v." means a standard measured value

Add to basket
2
True RMS Industrial Digital Multimeter CMM-40
R4,513.00 ex vat

Industrial Digital Multimeter - Overview

This Industrial Digital multimeter CMM-40 was designed for measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature, testing diodes and continuity. It is a Cat IV Digital multimeter rated up to 600V or Cat III up to 1000V.

Industrial Digital Multimeter - Features
- 2 Years Warranty
- Auto/manual range selection
- display 4¾ digits (40000 max)
- "DATA HOLD” function, for holding measured values
- "REL” function, comparing measurements relative to a stored reference value
- "MAX/MIN” function
- "PEAK HOLD” function
- memory for 2000 measurement results
- continuity test with acoustic signalling (beeper)
- "AUTO-OFF” function
- double moulded, IP65 waterproof casing
Add to basket
1
Industrial Multimeter With Bluetooth | CMM30
R3,836.00 ex vat

Industrial Multimeter CMM30 - Overview

The Industrial Multimeter with Bluetooth CMM-30 model is a device from a new generation of industrial multimeters that combines versatility, modernity, and extraordinary durability. The instrument comes with 11 basic measurement functions together with additional functions to provide a wide range of applications. The smartphone app enables remote reading and saving of measurements, even from places with difficult access thanks to wireless communication. The backlight of the device automatically adjusts the brightness level of the screen and the control panel to the prevailing conditions, while the built-in flashlight allows working in the dark. The innovative design combines drop protection, IP67 casing, and ease of use, even with dielectric gloves. This device is created for electricians who value quality and innovation.

Industrial Multimeter CMM30 - Features
- 11 measurement functions
- AC/DC voltage measurement
- AC/DC measurement
- Resistance measurement
- Capacity measurement
- Temperature measurement
- Duty Cycle measurement
- Frequency measurement
- Manual and Automatic range selection
- Simultaneously display the sum of DC and AC components
- HOLD function to capture stable readings of noisy signals
- Recording maximum/minimum/average values
- Relative measurements
- Display the peak value of the measured signal
- True RMS for AC voltage and current
- Built-in Bluetooth for wireless communication
- Beeper for circuit continuity
- Built-in flashlight
- Automatic backlight
- Robust housing with IP67 protection
- Rotary switch designed for easy handling
- Increased drop protection
- Auto-OFF function
- 6000 counts display
- An optional strap with a hook
Datasheet

Add to basket
Three-Phase Network Analyser Kit | UPM309RGW
Price range: R14,544.00 through R22,880.00 ex vat
Three-Phase Network Analyser Kit - Overview

This kit is used for the measurement and recording of the electrical parameters. It is suitable for consumption analysis and control and has an excellent quality/price ratio. The UPM309 power meter is the ideal instrument for establishing the measurement points on the plant and can be managed remotely. Data generated creates consumption profiles, recorded values trends, alarms and events reports, costs calculation as well as critical values identification. The Kit consists of a network analyser and 3 Rogowski coils. The use of Rogowski coils for current measurement allows quick installation on existing plants. The instrument can also be fit for the current consumption without replacing the transducer.

Three-Phase Network Analyser Kit - Features
- DIN 96x96 ultra-compact version, only 39 mm depth
- Fully bi-directional four-quadrant measurements
- Main electrical parameters measured and displayed
- 4 available KITs: 30, 45, 70, 90 cm coil length
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording
- Can record all energy counters
- Up to 24 parameters selectable
- MODBUS RTU communication by RS485 port / MODBUS TCP communication by Ethernet port
- Can manage the instrument in remote mode with WintoolNET software or by Web interface
- 2 digital outputs, 1 digital input
- Accuracy class 0.5 according to IEC/EN 61557-12 for active power/energy
Select options
2
Power Quality Analyzer | PQM-707
Price range: R52,780.00 through R68,685.00 ex vat

Power Quality Analyzer - Overview

This Power Quality Analyzer allows for versatile measurement, analysis, and registration of energy network parameters DC and 50/60Hz. This includes measuring the quality of electric energy in accordance with the European standard EN 50160. To Guarantee accuracy, all parameters are measured with Class S according to the IEC 61000-4-30 STANDARD.

This is the largest in this class of power quality analyzers and has a 7-inch colour touch screen which enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for work during the measurement without the necessity of connecting an external AC adapter.

The analyzer can be used directly, or indirectly via transformers in virtually all kinds of networks with rated voltage from 54V to 760V. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. With a safety rating of CAT IV 600V, the Power quality analyzer provides peace of mind during everyday use. The PQM-707 can therefore be used in the field of professional power engineering, maintenance services in industrial plants, as well as network analysis.

Power Quality Analyzer - Features
- 7" touch screen 800x480 pixel - intuitive operating
- CAT IV 600V - high safety
- Parameters acc. to class S - high accuracy of measurements
- Li-Ion rechargeable battery - higher mobility
- Removable memory card - recording data with no restrictions
- Possible measurements:
  - Measurements according to EN 50160
  - Voltage L1, L2, L3, N-PE (five inputs)
    
    average, minimum, maximum values, range to 760 V DC and 50/60Hz, ability to work with voltage transformers
  - Current L1, L2, L3, N (four inputs)
    
    average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers
  - Crest factor for voltage and current
  - Frequency from 40 Hz to 70 Hz
  - Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
  - Power recording:
    
    Budeanu method
    
    IEEE 1459
  - Active, reactive, apparent energy
  - Power factor, cosφ, tgφ
  - Up to 50th harmonics for voltage and current
  - Total Harmonic Distortion (THD) for voltage and current
  - Short-term (PST) and long-term (PLT) flicker
  - Unbalance of voltage and current
  - Current and voltage events registration including waveforms and RMS graphs half period
  - Inrush current
  - Calculator of energy tariffs
  - Analyzer measures and records according to the IEC 61000-4-30 class standard
Select options
1
Power Quality Analyzer PQM-700
R33,918.00 ex vat

Power Quality Analyser PQM-700 - Overview

Power Quality Analyzers are high-tech devices providing their users with comprehensive features for measuring, analyzing and recording parameters of 50/60 Hz power networks and power quality in accordance with the European Standard EN 50160. The analyzer is fully compliant with the requirements of IEC 61000-4-30:2009, Class S. The device is equipped with four cables terminated with banana plugs, marked as L1, L2, L3, N. The range of voltages measured by the four measurement channels is max. ±1150 V. This range may be extended by using external voltage transducers.

PQM-700 Power Quality Analyzer Features:
- Power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V
- Particular emphasis on measurements at low voltage poles, due to the ease of connection
- Independent power supply socket for voltage measurements for transformers and DC circuits
- Built-in real-time clock
- Measurements according to EN 50160
- Voltage L1, L2, L3, N
  - average, minimum, maximum and instantaneous values
  - range to 760 V
  - ability to work with voltage transformers
- Current L1, L2, L3, N (four inputs)
  - average, minimum, maximum and instantaneous values
  - measurement current with range to 3 kA (depends on used clamp)
  - ability to work with current transformers
- Crest factor for voltage and current
- Frequency from 40 Hz to 70 Hz
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
- Power recording:
  - Budeanu method
  - IEEE 1459
- Active, reactive, apparent energy
- Power factor, cosφ, tgφ
- Up to 40th harmonics for voltage and current
- Total Harmonic Distortion (THD) for voltage and current
- Short-term (PST) and long-term (PLT) flicker
- Unbalance of voltage and current
- Current and voltage events registration including waveforms and RMS graphs half period
Add to basket
1
Single Phase 2 Wire Energy Meter | UEM40-2C
Price range: R1,489.00 through R2,269.00 ex vat
Single Phase 2 Wire Energy Meter - Overview

1 DIN module energy meter for energy measurement in industrial and civilian applications, with the option of built-in communication: RS485 Modbus RTU or M-Bus. Available with MID certification suitable for billing.

Besides the energy, the meter can measure the main electrical parameters and makes them available on the display and on the built-in COM port if available. Optional COM port allows to manage the connected meter by a remote station and data is transmitted on a RS485 or M-Bus line according to the device model. Moreover, a dedicated application for remote management is provided:
• Modbus Master software > for energy meter management by PC in RS485 Modbus network
• M-Bus Master software > for energy meter management by PC in M-Bus network

The meter is built according to EN 50470-1 standard. The active energy is compliant to IEC/EN 62053-21 class 1, but for MID certified device it fulfils class B requirements according to EN 50470-3. The accuracy of the reactive energy is compliant to IEC/EN 62053-23 class 2.

Backlit LCD display with clear graphic symbols for easy reading. Metrological LED on front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and long-lasting reliability.

Single Phase 2 Wire Energy Meter - Features
- Direct connection up to 40 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- UEC40-2C for a simple energy meter without built-in communication
- UEM40-2C R for RS485 Modbus RTU communication
- UEM40-2C M for M-Bus communication
- High reliability
- 1 DIN module compact size
- Quick installation
- S0 output for energy pulse emission
- LCD display with 7 main digits
- Available with MID certification
Datasheet

Select options
1
Three Phase Energy Meter | UEM6C

Three Phase Energy Meter - Overview

Energy measurement for industrial and domestic applications, with built-in communication, according to the model. Either: RS485 Modbus RTU/ASCII, M-Bus or Ethernet Modbus TCP. Available with MID certification suitable for billing. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet, the device has a dedicated application for remote management as provided:
• Modbus Master software - for energy meter management by PC in RS485 Modbus or Ethernet network
• M-Bus Master software - for energy meter management by PC in M-Bus network
• Web server - built-in interface for energy meter management by PC in Ethernet network

It enables data recording with manual or automatic data transfer where data is sent to a remote server at the set time. This three-phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-22 class 0,5 S, but for MID certified devices it fulfils class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 6205323 class2. The wide backlit LCD display with clear graphics and is easy to read. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three Phase Energy Meter - Features
- Available built-in communication: RS485 Modbus RTU/ASCII or M-Bus or Ethernet (Modbus TCP)
- For 1 or 5A CT
- Programmable CT ratio
- 4 DIN modules
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 4 wire networks with a balanced or unbalanced load.
  M-BUS model can be used also for 3 / 4 wire networks
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- Class C according to EN 50470-3 (MID)
- Available with MID certification
LEGEND
MID: MID certified meter, with reset function only on partial counters.
RESET: Meter without MID certification, with RESET function on ALL counters

DATASHEET

Read more
Three-phase Network Analyzer | UPA20
R4,426.00 ex vat
Three Phase Network Analyzer -Overview

UPA20 is a three-phase network monitoring device that provides the measurements needed to complete energy efficiency projects and to assure the monitoring of an electrical distribution network. The instrument is easy to use with its large backlit multiple-display screen with 4 hotkeys. It is particularly suitable for consumption analysis and control, with an excellent quality/price ratio and provided with a correction function for CT wiring errors.

The Three-phase network analyser can be equipped with additional modules that give flexibility. Modules for RS485 communication and additional digital inputs/outputs can be used to increase its range of functionality. The instrument is compliant with IEC 61557-12. It guarantees performance levels from the PMDs under the environmental conditions typical of industrial and tertiary applications.

Three-phase Network Analyzer - Features
- Wiring error detection
- DIN 96x96 compact version
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- For current transformers (not included)
- Available optional plug-in modules for communication, inputs/outputs
- Active energy class 0,5 S according to IEC 62053-22
- Compliant with IEC 61557-12, the reference standard for PMDs (Performance Metering & monitoring Devices)
- UL listed product - UL no. E231725
Add to basket
2
High Current Loop Impedance Tester | MZC-320
R55,731.00 ex vat

High Current Loop Impedance Tester - Overview

Measurement of very low short circuit loop impedance (with resolution 0,1 mΩ) with a current of 130 A at 230 V; maximum 300 A at 550 V or with a current 24 A at 230 V, maximum 30 A at 550 V (with resolution 0,01 Ω).

High Current Loop Impedance Tester - Features
- measurements in installations with rated voltages between: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V i 290/500 V and frequencies 45...65 Hz
  - ability to perform measurements in short circuit system: phase-phase, phase-protective, phase-neutral
- differentiation between the phase voltage and the inter-phase voltage while calculating the short circuit current
- ability to change the length of test lead
- four-pole method, test leads do not require calibration (measurement with current 300 A)
- Touch voltage and touch shock voltage measurement with resistor 1 kΩ)
- AC voltage measurement in range 0...550V
- Memory of 999 measurement results with an ability to transfer the data to a PC
- Ability to transmit date to USB
- Meter meets the requirements of the standard EN 61557
Add to basket
Weighing Precipitation Sensor | rain[e]H3
R76,110.00 ex vat

Weighing Precipitation Sensor - Overview

Due to the innovative weighing technology combined with a self-emptying collection vessel the rain[e] sets new standards in professional precipitation measurement. Its outstanding resolution and accuracy are approved all over the world. The rain[e]H3 with electrically regulated ring heating is designed for extremely cold climates. Integrated outside temperature sensors, real-time clock, electronic monitoring when opening the housing and remote servicing are features of continuous development. With an optional port server and web interface, the rain[e]H3 is well equipped for all communicative demands in future.

Weighing Precipitation Sensor - Features
- Easy installation and maintenance
- Integrated temperature sensor
- Electronically controlled ring-, funnel- and drain-line heating
- Outstanding resolution and accuracy
- All-metal housing, weatherproof and long-living
https://www.youtube.com/watch?v=CTt6qRcxC0E

Add to basket
1
Thermal Imager Camera | KT-650.1
R416,627.00 ex vat

Thermal Imager Camera - Overview

This is a high level thermal imager with many features, options and functions. This includes a compass, GPS, IR analysing functions, Wi-Fi reports printing, and more. This is a fully radiometric, high resolution camera (with a resolution of 640x480 pixels) which records temperature at each point of the image. The built-in GPS receiver and compass automatically records the location where the photos were taken. This Thermal Imager Camera make shooting professional IR images fast and easy. It is housed in a durable, water and dust proof casing. It is compact and lightweight. It has a large and moveable touchscreen display. It includes free, intuitive software for image editing and reports creating. Creating a report on the job site is possible with the built-in reports module - along with the possibility of exporting to PDF. The camera can be connected to external devices - wired (LAN, USB, HDMI) and wireless (Wi-Fi).

Thermal Imager Camera - Features
- High resolution IR images up to 120,000 pixels (400x) and 307,200 pixels (640x480)
- Visible light digital camera 5MP resolution with LED lamp
- Sharp images regardless of lighting conditions
- 5 inch 720P high resolution LCD touch screen
- Rotating LCD display up to 270" for easy viewing angle
- Rotating lens up to 70" for easy viewing angle
- 4x (10x for plus version) continuous zoom with auto/motorized focus
- Android based operation system with open platform for various APP developments and program updating
- Powerful onboard analysis and reporting capabilities
- Multiple image presentation including IR visible, PIP and IR blending
- WiFi & Bluetooth wireless communication
- Optional high temperature range measuring up to 2000^oC (3632^oF) targeting electrical and industrial applications
- Optional 11^o telephoto or 45^o wide angle lens
Add to basket
1
Rapidox SF6 6100 Portable Gas Analyser

Portable SF6 analysers - Overview

The Rapidox SF₆ 6100 Portable tests the quality of SF₆ in MV & HV gas insulated electrical equipment. The analyser is pre-programmed with all current IEC and CIGRE test configurations. It can create customised test parameters. Exceptional accuracy and stability are provided when measuring the purity of SF₆ gas, through specially selected sensors. An output nozzle allows for the analyser to be attached to the Rapidox Gas Recovery Bag, ensuring that all sampled SF₆ gas is recovered. For the power transmission and distribution network, SF6 technology remains essential. To protect personnel, equipment and the environment regular SF6 analysis should be adopted within the maintenance schedule. The early identification of any decomposition products and moisture within the SF6 gas will help avoid unnecessary shutdowns, outages and failures, and reduce maintenance expenditures.

The modular configuration allows for up to eight compatible gases to be analysed simultaneously with one analyser. Internal SF₆ gas pressure is recorded and logged by the analyser. All measured gases are analysed and data-logged simultaneously with only a few minutes required to achieve a stable reading. To accelerate the time taken in-between dew point readings, a unique Rapidri system is fitted to analysers measuring H₂O. When not in use the sensor can be isolated via the ‘Run – Storage’ valve.

Other measurable gases include H₂O (dew point), SO₂, HF, O₂ & CF₄. Due to the instrument's modular design, several configurations are available to suit a variety of application requirements.

Portable SF6 Analyser - Features:
- Easy to operate and configure
- Housed within a heavy-duty IP66 Pelican case
- Integrated thermal printer provides on-site printing of test results
- Total weight of 8.5kg
- Lithium battery provides up to eight hours of operation
- Pre-programmed with all current IEC and CIGRE test configurations
- Ability to create customised tests
- Measurement data can be viewed in real-time
- Data download in an MS Excel compatible format via a USB memory stick
- Features a 7” (18cm) full-colour touch screen, soft menu keys and alphanumeric keypad
- Editable test locations and user names
- Password protection feature
- Multi-language
Read more
Earth Resistance Meter | MRU-200 GPS
Price range: R49,225.00 through R53,851.00 ex vat

Earth Resistance Meter - Overview

The MRU-200 earth resistance meter is unique in the market as it uses all measurement methods to get earth resistance. Making sure the ground system has a low earth ground resistance when initially installed is a very important safety check. Making sure the low resistance is maintained is just as important. Resistance of the grounding system might increase when the ground rods are corroded. Over time, soil with high moisture, salt content and high temperatures will corrode connections. It is therefore recommended that the earthing be checked periodically to make sure there is not a big increase in resistance.
Earth Resistance Meter - Features
- earth resistance measurement with 2-pole, 3-pole,4-pole method
- two clamps earth resistance measurement without auxiliary test probes
- impulse earth impedance measurement, three kinds of measuring impulse 4/10μs, 8/20μs, 10/350μs
- earth resistance measurement without disconnecting measured earths (using clamp)
- continuity measurement
- leakage current measurement
- optional built-in GPS
- GPS coordinates of the measurement are stored in meter memory (with GPS model)
- measurement of resistance of auxiliary electrodes R_S and R_H
- measurement of interference voltage
- measurement of interference frequency
- measurement in the presence of interference voltage in the power network
- with frequency 16 2/3 Hz, 50 Hz, 60 Hz and 400 Hz (with automatic selection of proper frequency of measuring signal)
- selection of maximum measuring voltage (25 V and 50 V)
- introducing the distance between the electrodes for the resistivity in meters (m) and feet (ft)
- memory of 990 measurements (10 banks of 99 cells each)
- calibration of clamp used
- real-time clock (RTC)
- data transmission to the computer USB and Bluetooth*
- indication of battery state
https://www.youtube.com/watch?v=vKKubPxECV8
Select options
Phase Sequence and Motor Rotation Tester | TKF-13
R3,949.00 ex vat

Phase Sequence and Motor Rotation Tester - Overview

The TKF-13 tester is a modern, high-quality, simple and safe phase sequence or motor rotational tester. However, it is recommended to acquaint oneself with the manual to avoid measuring errors and prevent possible problems related to the meter's operation.

Phase Sequence and Motor Rotation Tester - Features
- Type of insulation: double, according to EN 61010-1
- Safety category: CAT III 600V acc. to EN 61010-1
- Ingress Protection class acc. to EN 60529: IP42
- Rated phase-to-phase voltage range: 120... 690 V AC
- Maximum operation phase-to-phase voltage: 760 V AC
- EMF motors voltage range: 1...760 V AC
- Frequency range: 2...70 Hz
- Diode flashing time of battery state: approx. 1 s
- Function auto-off: 5 min
Add to basket