Tag: Electrical Supply Network

Home -> Tag: Electrical Supply Network

Electrical Supply Network

Phase Sequence Tester | TKF-12
R2,369.00 ex vat

Phase Sequence Tester - Overview

The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

Phase Sequence Tester - Features
- Type of insulation: double, according to EN 61010 - 1
- Safety category: CAT III 600 V acc. to EN 61010 - 1
- Ingress protection class acc. to EN 60529: IP42
- rated phase-to-phase voltage range: 120...690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10...70 Hz
- power supply: from the tested electrical installation, up to 15 min for max. voltage
Add to basket
MIC-2501 Insulation Resistance Tester/Meter
R18,539.00 ex vat
MIC-2501 Insulation Resistance Tester/Meter - Overview

A very handy tool for measuring Insulation resistance with up to 2500V. It can measure up to 1TOhms in accordance with IEC61557-2. Comes with a convenient carry case which has straps to free up your hands during operations.

MIC-2501 Insulation Resistance Tester/Meter - Features
- Selectable voltage in the 100…2500 V range with 100 V step
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of capacitance of tested object after the insulation resistance measurement
- Acoustic signalling of five-second periods to facilitate obtaining time characteristics
- Measured test times T₁, T₂ i T₃ to measure one or two absorption coefficients in 15, 60 and 600 s
- Indication of actual test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement methods
- Continuity measurement of protective and equipotential conductors according to EN 61557-4
- Leakage current measurement
- Alternating and direct voltages in the 0...750 V range
- Built-in rechargeable battery pack
- The instruments meet the requirements of the EN 61557 standard
- Charge from car lighter (12 V) socket (additional accessories)
https://www.youtube.com/watch?v=ZKKcoVvN-B8

Add to basket
1
Three-phase 80A Energy counter with built-in communication | UEM80
Price range: R5,084.00 through R9,762.00 ex vat
Three-phase 80A Energy counter - Overview

The Three-phase Energy meter is for industrial and domestic applications, with built-in communication. Either: RS485 Modbus RTU/ASCII, M-Bus, or Ethernet Modbus TCP, depending on the module. Available with MID certification suitable for billing. Besides measuring energy, the meter can measure many electrical parameters and make them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software -> For energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software -> For energy meter management by PC in M-Bus network.
- Web server -> Built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Three-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-21 class 1, but for MID certified devices it fulfils class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 62053-23 class 2. The wide backlit LCD display has clear graphic symbols for easy reading. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three-phase 80A Energy counter - Features
- UEM80-4D R for RS485 Modbus RTU/ASCII communication
- UEM80-D M for M-Bus communication
- UEM80-4D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 4 wire networks with a balanced or unbalanced load.
  M-BUS model can be used also for 3 / 4 wire networks
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- Available with MID certification
Datasheet

CONTACT US FOR FURTHER OPTIONS

Select options
Single-Phase 80A Energy Meter with built-in communication | UEM80-2D
Price range: R4,939.00 through R8,426.00 ex vat
Single-Phase 80A Energy Meter with built-in communication - Overview

The UEM80-2D Energy meter is for industrial and domestic applications, with built-in communication, depending on the model. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software - for energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software - for energy meter management by PC in M-Bus network.
- Web server - built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Single-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-22 class 0,5 S, but for MID certified devices it moreover fulfils class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 6205323 class2. A wide backlit LCD display with clear graphics makes reading easy. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and long-lasting reliability.

Single-Phase 80A Energy Meter with built-in communication- Features
- UEM80-2D R for RS485 Modbus RTU/ASCII communication
- UEM80-2D M for M-Bus communication
- UEM80-2D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- LCD display with 7 main digits
- Available with MID certification
Datasheet

CONTACT US FOR MORE OPTIONS

Select options
Three-Phase 4 wire Energy Counter | UEC1P5
R5,659.00 ex vat
Three-Phase 4 wire Energy Counter - Overview

The three-phase 4-wire energy counter is for industrial and domestic applications, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in IR ports. The LCD display shows the energy and instantaneous power. This Three-Phase Energy meter is built according to the EN 50470-1 standard. Active energy is compliant with IEC 62053-21 class 1, but for MID certified devices it fulfils class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 62053-23 class 2. Wide backlit LCD with clear graphic symbols for easy reading. Metrological LED on the front panel and sealable terminal covers. Available versions with different voltage working range for the connection on a 3 or 4-wire network, suitable for balanced or unbalanced loads. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three-Phase 4 wire Energy Counter- Features
- For 1 or 5A CT
- Programmable CT ratio
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 3 / 4 wire networks with a balanced or unbalanced load
- Class B according to EN 50470-3 (MID)
- Tariff input
- 2 S0 outputs for energy pulse emission
- LCD display with 8 main digits
- IR optical port for communication with external modules
- Available with MID certification
Datasheet

CONTACT US FOR MORE OPTIONS

Select options
Thermal Imaging Camera | KT-385

Thermal Imager Camera Overview KT385

Highly detailed images and accurate measurements. More to see, less to hold. The large display and compact design ensure a perfect balance between high performance and small dimensions. The centrally located navigation button supported by a menu on the touchscreen ensures simple and intuitive operation. Thermal imaging is not the only function. Its camera is equipped with visual lenses and related image mixing technologies: PIP, and MIF. Support from the built-in LED torch and laser improves operational quality by facilitating photography and then image interpretation. The built-in report module allows for the preparation and printing out of reports directly from the camera. Built-in communication interfaces ensure constant communication between the camera and the computer or mobile device, also over a wireless network. The ideal tool for both novice users and professional thermographic inspectors.

Thermal Imager Camera features
- high sensitivity of detectors and a wide temperature range
- comprehensive image analysis tools
- intuitive user interface
- IR video recording (on the SD card or computer disc)
- built-in report module
- different imaging modes: IR, visual, PIP, MIF
- built-in visual camera: 5 Mpx
- built-in: LED torch, laser pointer
- interfaces: Micro USB2.0, Wi-Fi, Gigabit Ethernet, Mini HDMI, slot microSD
Read more
Thermal Imager | KT-560M

Thermal Imager - Overview

This Thermal Imager has high-level thermal cameras along with a variety of IR lenses. A fully radiometric, high-resolution camera which records temperature at each point of the image. This camera makes shooting professional IR images quick and easy. The user-friendly design, lightweight, and intuitive handling make Sonel thermal cameras a pleasure to use. Experienced or new users needing a professional diagnostic tool will find the menus easy to navigate via the touchscreen. Both the touchscreen and the lens swivel independently to view objects of interest that are difficult to access from any angle.

Thermal Imager - Features
- Removable Li-ion battery with 4-hour working time
- 5’’ large rotating touchscreen with no image cropping
- High brightness display gives detailed information in high ambient light or outdoors
- Save IR images and videos (to SD card or directly to a PC)
- Built-in Report module for complete thermal analysis in the camera
- View images as IR, visual, “picture in picture” and MIF mode (combined visual and IR)
- Add voice and text notes, draw graphical symbols (arrows or circles) on images
- 5Mpix visual camera
- GPS, digital compass, LED flashlight and laser pointer
- Micro USB 2.0, Wi-Fi, Bluetooth®, Gigabit Ethernet, Mini USB and SD slot for data
  transfer
- ThermoAnalyze2 Software for PC
Read more
1
Leakage Current Alarm Signaler | MPU-1

Leakage Current Alarm Signaler- Overview

MPU-1 measures leakage current in AC, low and medium voltage power networks. Improve safety when working with dangerous voltage lines with continuous monitoring of leakage current. Designed to indicate network safety conditions for leakage current. The device enables you to set maximum safe levels of flowing leakage current which will activate visual and audible alarms.

Leakage Current Alarm Signaler - Features
- Constant monitoring of current flowing on earthing
- Use of single clamp or two clamps simultaneously
- Work mode LED indicator
- Visual and sound alarm
- Battery level monitoring
- No DC current measurement
- Measurement with flexible clamp (Rogowski coil)
- Measurement in 50Hz or 60 Hz frequency low and medium voltage networks
- Auto-ranging
- Ergonomic handling
- MPU-1 for operation requires F1, F-2 or F-3 clamp (additional accessories)
Read more