T6 Torque Transducer

T6 Torque Transducer – Overview

The T6’s floating mount design typically installs between two single-flex couplings and is ideal in applications where low capacity measurements must be taken in conjunction with much higher running torques or torque spikes. The two fully independent strain gage bridges provide simultaneous ±5V or ±10V high-level output signals over the two ranges. Non-contact design features 0.1% combined error, 16-bit resolution digital electronics and remotely activated, internal shunt calibration resistors directly at the strain gage bridges. Speed and angle can be measured with the optional encoder.

T6 Torque Transducer – Features

Dual range capacities – 10:1 ratio
(5/0.5 to 20K/2K Nm)
(44.3/4.43 to 177K to 17.7K lb-in)
±5 VDC output standard (+/-10VDC Optional
Digital electronics
Stainless steel shaft
12 to 28 VDC supply
Contactless
5 kHz sample rate – each range
16-bit

Description

T6 Torque Transducer

SPECIFICATIONS

ACCURACY – (MAX ERROR)

Combined Error – %FS

±0.1

Non repeatability – %FS

±0.02

ELECTRICAL

Output – VDC

±5

Bandwidth – kHz – dB

3 – 3

Calibration Signal – %RO

100

Speed Output – puls/rev.

Supply Voltage – VDC

+12 to +28

Supply Current – mA

Electrical Connection – pin

Resolution – bit

Sample Rate – kHz

MECHANICAL

Safe Overload – %RO

200

Max Speed – RPM

Varies with capacity (see table)

Shaft Material

Stainless steel

Housing Material

Aluminum

TEMPERATURE

Effect on Zero – %RO / deg

°C

±0.02

Effect on Output – % / deg

°C

±0.01

Rated Range

°C

+5 to +45

°F

+41 to +113

Operating Range

°C

0 to +60

°F

+32 to +140

U.S. dimensions and capacities are provided for conversion only. Standard products have International System of Units (SI) capacities and dimensions.

T6 Torque Transducer

T6 Torque Transducer

T6 Torque Transducer