Tag: Motor Testing

Home -> Tag: Motor Testing

Motor Testing

2
True RMS Industrial Digital Multimeter CMM-40
R4,513.00 ex vat

Industrial Digital Multimeter - Overview

This Industrial Digital multimeter CMM-40 was designed for measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature, testing diodes and continuity. It is a Cat IV Digital multimeter rated up to 600V or Cat III up to 1000V.

Industrial Digital Multimeter - Features
- 2 Years Warranty
- Auto/manual range selection
- display 4¾ digits (40000 max)
- "DATA HOLD” function, for holding measured values
- "REL” function, comparing measurements relative to a stored reference value
- "MAX/MIN” function
- "PEAK HOLD” function
- memory for 2000 measurement results
- continuity test with acoustic signalling (beeper)
- "AUTO-OFF” function
- double moulded, IP65 waterproof casing
Add to basket
1
Industrial Multimeter With Bluetooth | CMM30
R3,836.00 ex vat

Industrial Multimeter CMM30 - Overview

The Industrial Multimeter with Bluetooth CMM-30 model is a device from a new generation of industrial multimeters that combines versatility, modernity, and extraordinary durability. The instrument comes with 11 basic measurement functions together with additional functions to provide a wide range of applications. The smartphone app enables remote reading and saving of measurements, even from places with difficult access thanks to wireless communication. The backlight of the device automatically adjusts the brightness level of the screen and the control panel to the prevailing conditions, while the built-in flashlight allows working in the dark. The innovative design combines drop protection, IP67 casing, and ease of use, even with dielectric gloves. This device is created for electricians who value quality and innovation.

Industrial Multimeter CMM30 - Features
- 11 measurement functions
- AC/DC voltage measurement
- AC/DC measurement
- Resistance measurement
- Capacity measurement
- Temperature measurement
- Duty Cycle measurement
- Frequency measurement
- Manual and Automatic range selection
- Simultaneously display the sum of DC and AC components
- HOLD function to capture stable readings of noisy signals
- Recording maximum/minimum/average values
- Relative measurements
- Display the peak value of the measured signal
- True RMS for AC voltage and current
- Built-in Bluetooth for wireless communication
- Beeper for circuit continuity
- Built-in flashlight
- Automatic backlight
- Robust housing with IP67 protection
- Rotary switch designed for easy handling
- Increased drop protection
- Auto-OFF function
- 6000 counts display
- An optional strap with a hook
Datasheet

Add to basket
2
Mega Ohm Meter | MIC-10
R10,492.00 ex vat

Mega Ohm Meter - Overview

The MIC-10 meter is designed to perform electrical tests, which establish the safety of insulation in systems. This is a very handy digital multimeter tool, measuring insulation resistance up to 10GOhms with up to 1000V measuring in accordance with IEC61557-2.

Mega Ohm Meter - Features
- Continuous indication of insulation resistance or leakage current
- Select test voltages of: 50, 100, 250, 500, 1000 V
- Automatic discharge of capacitance of tested object after the insulation resistance measurement
- Acoustic signalling of five-second periods to facilitate obtaining time characteristics
- Indication of actual test voltage during the measurement
- Protection against measuring live objects
- Three-lead measurement
- Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with >200 mA current
- Low-voltage circuit continuity and resistance measurement
- Circuit resistance measurement (<1999 ) with the <15 mA current
- Sound signal if circuit resistance is below 30Ω
- Capacitance measurement during the R_ISO measurement
- Measurement of alternating and direct voltages in the 0...600 V range
- Power supply: 4 AA disposable or rechargeable batteries, monitoring of power supply voltage
- Meter conforms to EN 61557
Add to basket
1
Digital Non-Contact and Contact Tachometer Kit | TA503C
R1,895.00 ex vat
Digital Non-Contact and Contact Tachometer Kit - Overview

This tachometer can measure the RPM or surface speed, and distance. It is used in electric power, steel, petrochemical, aviation, fan manufacturing and ventilation pipelines. The Digital Non-Contact and Contact Tachometer Kit has a USB connection and free software download. It can display real-time data sheets and data charts.

Digital Non-Contact and Contact Tachometer Kit - Features
- Measuring distance: 50 ~ 500mm
- RPM non-contact: 3 ~ 99,999
- RPM contact: 3 ~ 19,999
- Accuracy non-contact: 0.05% ± 1dgt
- Accuracy contact: 0.1% ± 1dgt
- Surface speed: m/min, ft/min
- Length/Distance function: m
- 2000 groups memory (Timer based 00:00:00, No date and time)
- Ambient temperature: -10 ~ 50°C
- High and Low alarm limit setting
- Large colour LCD
- Min, Max, Ave and Data hold function
- Auto power off after 15 minutes
- c/w soft case, USB cable, contact adapter, surface wheel, 2 x rubber cones, reflective tape, manual and battery
Add to basket
4
Pyrometer Infrared Thermometer | DIT-500
R8,950.00 ex vat

Pyrometer Infrared Thermometer - Overview

Professional and compact infrared thermometers are a solution for problems where specific thermal conditions are required. The intuitive one-handed operation of the device and the ergonomically designed gun-type housing allow for trouble-free daily work. Infrared is used to determine the surface temperature of the tested object. The optical system of the instrument detects the radiation that is emitted, reflected and transmitted, then gathers it and focuses it in the detector. The electronic system converts the optical data into a temperature value. To increase the precision of measurement and facilitate targeting, the device is equipped with a laser pointer.

Pyrometer Infrared Thermometer - Features
Precise

Non-contact temperature measurement

Type K temperature measurement

Ergonomic gun-type housing

Resolution 0.1°F (0.1°C)

Emissivity digitally adjustable from 0.10 to 1.00

°C/°F switch

Automatic range selection

High and low alarm

DATA HOLD function for holding measured values

Temp display max, min, average and difference

Trigger lock

AUTO-OFF function

Rapid reaction to temperature changes (below 150 ms)

Double laser sight (determination of the measurement area)

Data memory (LOG) for 100 measurements

Transmission of current readings to computer via USB cable

Backlit LCD display
Add to basket
Phase Sequence and Motor Rotation Tester | TKF-13
R3,949.00 ex vat

Phase Sequence and Motor Rotation Tester - Overview

The TKF-13 tester is a modern, high-quality, simple and safe phase sequence or motor rotational tester. However, it is recommended to acquaint oneself with the manual to avoid measuring errors and prevent possible problems related to the meter's operation.

Phase Sequence and Motor Rotation Tester - Features
- Type of insulation: double, according to EN 61010-1
- Safety category: CAT III 600V acc. to EN 61010-1
- Ingress Protection class acc. to EN 60529: IP42
- Rated phase-to-phase voltage range: 120... 690 V AC
- Maximum operation phase-to-phase voltage: 760 V AC
- EMF motors voltage range: 1...760 V AC
- Frequency range: 2...70 Hz
- Diode flashing time of battery state: approx. 1 s
- Function auto-off: 5 min
Add to basket
Phase Sequence Tester | TKF-12
R2,369.00 ex vat

Phase Sequence Tester - Overview

The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

Phase Sequence Tester - Features
- Type of insulation: double, according to EN 61010 - 1
- Safety category: CAT III 600 V acc. to EN 61010 - 1
- Ingress protection class acc. to EN 60529: IP42
- rated phase-to-phase voltage range: 120...690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10...70 Hz
- power supply: from the tested electrical installation, up to 15 min for max. voltage
Add to basket
2
10kV Insulation Resistance meter up to 40 Tera-Ohm | MIC10k1
R92,321.00 ex vat

10kV Insulation Resistance meter - Overview

This insulation resistance meter has a digital filter function for measurements in a high-noise environment. Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 with current > 200 mA. Adjustable limits for measured resistance R_ISO and R_CONT. Measurement of leakage current during insulation resistance testing. DC and AC voltage measurement in the range of 0...750 V. Drawing graphs on the display during measurement. Innovative memory with the option to describe measurement points, facilities, and names of customers. Can be operated with a mini Bluetooth keyboard (optional). Stable measurements in noisy environments such as 765 kV substations. Graphic LCD 5,6'’ backlit display. Keyboard backlit. Power supply from battery packs. Built-in fast charger. The instruments meet the requirements of the EN 61557 standard.

10kV Insulation Resistance meter - Features
- clear visible display
- measurement voltage in the range of: 50…10000 V (50...1000 V at 10 V and 1...10 kV at 25 V)
- continuous indication of measured insulation resistance or leakage current
- automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement
- acoustic signalling of 5 seconds intervals to facilitate capturing time characteristics
- adjustable measuring time to 99'59'’
- metered T₁, T₂ and T₃ test times for measuring one or two absorption coefficients from the range of 1…600 s
- polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement
- indication of actual test voltage during measurement
- 1.2 mA, 3 mA and 5 mA test current
- insulation resistance measurement using two- or three-wire method
- measurements with test leads up to 20 m
- protection against measuring live objects
- automatic measurement of multiple core cables with the additional AutoISO-5000 adapter (for MIC-10k1 max. voltage 5 kV)
- measurement of capacitance during the measurement of R_ISO
- measurement of temperature (with additional probe - WASONT1)
- step voltage insulation resistance measurement (SV)
- Dielectric Discharge calculation (DD)
- location of damage (burnout)
https://www.youtube.com/watch?v=ibX7f55ngzc

Add to basket
3
Digital Clamp-on Multimeter | CMP-2000
R4,776.00 ex vat

Digital Clamp-on Multimeter - Overview

Universal clamp meter, enabling the measurement of current up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm. The instrument has electronic overload protection for all functions and ranges.

Digital Clamp-on Multimeter - Features
- Safe, insulated measuring clamp
- Auto-ranging with over range indication
- "DATA HOLD” function, for holding measured values
- Backlit LCD
- "MAX/MIN” function
- "AUTO-OFF” function after 30 min
- "DC ZERO” possibility to zero the display & reading relative actual value less stored "zero” value
- AC/DC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A
- Measurement INRUSH current in start-up phase of electrical device
- AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V
- Resistance measurement and continuity test with acoustic signalling (beeper) for resistance below 30 Ω
- Capacitance measurement
- Temperature measurement
- Frequency measurement
- Duty cycle measurement
- Diode test
- Continuity test with acoustic signalling (beeper) for resistance below 30 Ω
Add to basket
Cropico DO4000 MilliOhm Meter
R20,480.00 ex vat
Cropico DO4000 MilliOhm Meter - Overview

This portable milliohm meter is a practical digital instrument measuring low resistance. Suitable for use in multiple industries, workshops, field or test labs such as in Aerospace, Automotive, Manufacturing, Military, and Utilities. This milliohm meter is of rugged construction and contained in a sturdy plastic case with easy-to-use buttons. The Series 4000 has many advanced features including auto-ranging, forward and reverse current measurement with auto average, true current zero, protection up to 415 volts rms, digital calibration and long scale length, 4000 count and auto power down to maximise battery life. Supplied with batteries and measuring leads.

Cropico DO4000 MilliOhm Meter- Features
- True 4 terminal Kelvin/Thomson principle measurement eliminates lead resistance errors
- True zero capabilities Buttons to null measurement offsets
- Digital calibration
- Open circuit lead warning on display
- 15mm LCD 4000 count with automatic decimal point and polarity indication
- Manual Auto Ranging selection
- Calibration Digital security key protected
- Removable pack with 5 1.5V non-rechargeable batteries.
- Separate rechargeable pack, charger and docking station as optional extras
- Safety EN 61010-1 EMC-EN 61236
- Forward and Reverse current measurement with auto Averaging to compensate for thermoelectric effect
https://www.youtube.com/watch?v=N6xrnt2vz1Y

Add to basket
1
CMP-1006 Digital Clamp-On Multimeter
R2,825.00 ex vat

Digital Clamp-On Multimeter - Overview

Digital Clamp-on multimeter which is designed to measure INRUSH current in start-up phase of electrical device (high frequency of sampling). AC/DC voltage measurement (TRUE RMS) up to 600 V.

Digital Clamp-On Multimeter - Features
- Resistance measurement and continuity test with acoustic signalling
- Temperature measurement (Fahrenheit and Celsius)
- Frequency measurement
- Duty cycle measurement
- Diode test
- Safe, insulated measuring clamps
- Auto/manual range selection
- DATA HOLD function, for holding measured values
- Backlit LCD
- DC ZERO mode to zero the display and reading relative actual value less stored zero value
- MAX/MIN function
- Over range indication
- AUTO-OFF function
Add to basket
Insulation Resistance Meter 5kV | MIC-5050
R58,702.00 ex vat

Insulation Resistance Meter 5kV - Overview

This insulation resistance meter has a digital filter function for measurements in high-noise environments. Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 with current > 200 mA. Adjustable limits for measured resistance R_ISO and R_CONT. Measurement of leakage current during insulation resistance testing. DC and AC voltage measurement in the range of 0...750 V. Graphs on the display during measurement. Innovative memory with the option to describe: measurement points, facilities, and names of customers. Bluetooth keyboard (optional). Graphic backlit LCD 5,6'’. Keyboard backlit. Power supply from a main power line or battery packs. Built-in fast charger. The instruments meet the requirements of the EN 61557 standard.

Insulation Resistance Meter 5kV -Features
- measurement voltage any in the range of 50...5000 V (50...1000 V at 10 V and 1...5 kV at 25 V)
- continuous indication of measured insulation resistance or leakage current
- automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement
- acoustic signalling of 5 seconds intervals to facilitate capturing time characteristics
- adjustable measuring time to 99'59'’
- metered T₁, T₂ and T₃ test times for measuring one or two absorption coefficients from the range of 1…600 s
- polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement
- indication of actual test voltage during measurement
- 1.2 mA, 3 mA and 5 mA test current
- insulation resistance measurement using two- or three-wire method
- measurements with test leads up to 20 m
- protection against measuring live objects
- automatic measurement of multiple core cables with the additional AutoISO-5000 adapter
- measurement of capacitance during the measurement of R_ISO
- measurement of temperature (with additional probe - WASONT1)
- step voltage insulation resistance measurement (SV)
- Dielectric Discharge calculation (DD)
- location of damage (burnout)
https://www.youtube.com/watch?v=DyOH7K4Yoqg

Add to basket
Benchtop Power Analyzer up to 8 Phase Analysis | PPA3500

High-Performance PPA3500 up to 8-Phases Power Analysis Overview

The PPA3500 is a high accuracy 3~6 phase power analyzer able to perform reliable, accurate power analysis in a variety of applications. DUT to innovative analogue card design, the PPA3500 is packaged in a compact 2U chassis. The PPA3500 is available in 3, 4, 5 or 6-phase configurations. The PPA3500 power analyzer benefits from a full colour “Dual” TFT display, this concept employs two TFT displays within one instrument, allowing for a large widescreen display area in a 2U form factor. There is also the option to install the unit in a 19"| rack providing a 2U 6 Phase solution, see accessories for more details.

Proprietary Technology featuring the industry-renowned planar shunt technology (A shunt design topology developed by N4L) and FPGA based real-time no-gap analysis techniques, the PPA3500 is able to provide groundbreaking 6-phase analysis performance. Real-Time no gap analysis ensures efficiency measurements are entirely synchronized between input and output.

All PPA3500 units are supplied with UKAS ISO17025 certification as standard, this is performed at N4L in the UK in our accredited ISO17025 Laboratory.

6 phase Power Analyzer Features
- Designed specifically for inverter drive applications
- Excellent Accuracy 0.03%
- Wide Bandwidth ideal for distorted signal analysis such as PWM Inverter drives
- 1MHz Bandwidth
- Torque and Speed inputs fitted as standard +/- 10V, Analogue DC and Pulsed Inputs
- Extremely high accuracy phase measurement of 0.01deg
- Real-time monitoring and efficiency calculation of Electrical to Electrical and Electrical to Mechanical
- ISO17025 (UKAS) traceable certification supplied
- 8 Phase Analysis Use 3P2W + CH3 + 3P2W + CH3 to measure 8 phases including 3 Phase Input Power, DC Bus and 3 Phase Output Power
- Low profile – 2U High, up to 6 Phase measurement
- DFT Based Power Calculation Utilize the Power of DFT Fourier analysis, made possible using top-of-the-range DSPs and FPGAs
- PWM Motor drive mode for quick easy setup
https://www.youtube.com/watch?v=ntKljPrXvYM

Read more
Winding Resistance Transformer and Motor Meter | MR 8050

Winding Resistance Transformer and Motor Meter - Overview

The MR8050 can measure highly inductive windings of transformers, motors, and reactors with a range of 100µΩ with 0.01µΩ resolution up to 6kΩ. The performance of the measured objects can be up to 800MVA or even more. The magnetic loading of a transformer is performed quickly using a high loading voltage (60V), this is important for time-critical measurements (cooling curves). The unloading of the transformer's core is fast and safe, as the energy is dissipated in the MR8050. The temperature of the measured objects can be pre-set or measured using a PT100 temperature sensor and the resistance is calculated for 20°C using the temperature coefficient for copper or aluminum heat-loss measurements. The resistance at t=0 (disconnection of load) is shown as a result of the internal regression algorithm. Two windings (mostly HV and LV) can be measured simultaneously in the DUAL measuring method. The MR 8050 also features automatic tap-changer control for measuring different taps without interrupting the measuring current.

Winding Resistance Transformer and Motor Meter - Features
- 2 channels for DUAL measurements
- Measuring time short due to very fast uploading
- Discharge time 1/10 of uploading time
- Heat - loss measurements with regression algorithm
- LCD-Display with 240 x 128 pixels with backlight
- USB standard and RS232C 9600 baud
- PT100 connector for PT100 temperature probe
- Tap changer connector for automatic tap control
- Warning system connector for a separate warning light
- Internal test storage for up to 1000 measurements
- Inputs full protected against static and transient voltages
- Wide current ranges from 50mA to 60A
Datasheet

Read more
Thermal Imager | KT-80

Thermal Imager - Overview

The Sonel KT series is an efficient, budget-friendly and professional infrared camera. This robust and very handy high-tech system is intuitive and user-friendly. Its single-hand operation makes it an ideal tool for troubleshooting electrical installations, mechanical components, buildings, process equipment, HVAC/R equipment and others.

Thermal Imager - Features
- Friendly UI, easy to use without training
- Affordable as entry-level diagnostic tool
- Removable large capacity Li-ion battery
- 4-hour working time
- 3,5'’ large screen with no image cropping, high brightness
- Rugged and compact design
- Standard Micro USB interface
- Wi-Fi connection (Optional)
Read more