Action Instruments Product Categories

Electrical Installation Multi-function Meter | MPI-530
R46,818.00 ex vat

Electrical Installation Multi-function Meter - Overview

The Electrical Installation Multi-function Meter MPI-530 is an instrument for electric shock protection measurements. It includes the option of various earthing and earthing resistance measuring methods. Additionally, the meter enables its user to analyse power supply parameters, and record and display them on its screen. The instrument automatically measures the insulation resistance in a socket and 3 -, 4 - and 5-wire cables when used with an AutoISO-1000C adapter. Measurement results may be continuously verified, depending on the user’s demand or according to binding regulations. The memory of the instrument may store tens of thousands of measurements allowing users to store them in a structure of a protocol and describe individual measurement points.

Datasheet

Add to basket
Insulation Resistance Meter 15TΩ | MIC-5010
R49,112.00 ex vat
Insulation Resistance Meter 15 TΩ - Overview

This resistance meter is a reliable tool for measuring insulation resistance up to 15 TΩ. The maximum measurement current is 1.2 mA or 3 mA, which guarantees the charging of an object with a large capacity in a short time. Each measurement, either when the programmed time expires or is manually interrupted, ends with the meter discharging the object. The device has unique algorithms that allow it to recognise the nature of the voltage present on an object, enabling the instrument to determine whether the voltage is the mains voltage or whether it is the voltage generated by an electromagnetic field. This makes it possible to carry out measurements in the presence of very strong electromagnetic fields where this was previously not feasible.

The instrument is equipped with accessories that guarantee safety during measurements with all available voltages - test leads, probes, and crocodile clips meet extremely rigorous standards. The accessories are supplied as standard with a handy carrying case. The high resistance of the device to interference means that cables as long as 20 m can be used for measurements.

Insulation Resistance Meter 15 TΩ - Features
- Voltage range of 50…5000 V, 50…1000 V in steps of 10 V, 1…5 kV in steps of 25 V
- Continuous indication of insulation resistance and leakage current
- Automatic discharge of measured object capacitance voltage after measurement
- Acoustic signaling of 5-second intervals for capturing time characteristics
- Adjustable measuring time - max. 99'59'’
- Metered T₁, T₂, and T₃ test times
- Measurement of coefficients: polarisation (PI), absorption Ab1, Ab2, dielectric absorption ratio (DAR)
- Indication of actual test voltage during measurement
- Test current: 1.2 mA or 3 mA
- Two- and three-lead method of insulation resistance measurement
- Measurements with test leads up to 20 m
- Protection against measuring live objects
- Measurement of capacitance during the measurement of R_ISO
- Step voltage insulation resistance measurement (SV)
- Dielectric Discharge calculation (DD)
- Digital filters for measurements with strong interferences
- Continuity measurement of protective connections & bonding in accordance with EN 61557-4 with current > 200 mA
- Adjustable limits for measured insulation resistance
- Adjustable limits for measured R_CONT resistance
- Measurement of leakage current during insulation resistance testing
- DC and AC voltage measurement in the range of 0…600 V
- 990 cells of memory (11880 records)
- Wireless data transmission via Bluetooth or USB cable
- Power supply from mains or battery pack
- Backlit display
- Backlit keys
- Meets EN 61557 standard
Add to basket
MMR-6700 Micro Ohmmeter
R137,108.00 ex vat
MMR-6700 Micro Ohmmeter - Overview

This versatile and multifunctional micro ohmmeter presents a single device for HV circuit breaker and transformer measurements. Its modern design and advanced solutions enable measurements of resistive objects with high current. The device has a module for the measurement of inductive objects with current of up to 10 A. It also comes with temperature measurement and automatic compensation of measurement. Additionally, the micro ohmmeter has a recording function. The special measurement algorithms and additional functionalities allow you to select the appropriate measurement method depending on the nature of the measured object and the measurement conditions, thus increasing the measurement capabilities and application areas of the device. It has modern, easy-to-read interfaces, and wireless communication, and cooperates with a computer, printer, and a 2D code reader.

MMR-6700 Micro Ohmmeter - Features
- measures resistive objects with current up to 100/200 A
- measures induction objects up to 10 A
- measures objects earthed on both sides (i.e. main joints of HV switches)
- measures one or two-way current flow
- high immunity to outside interference
- measures temperature of windings
- automatic compensation temperature of objects measured
- state of art interface with a touch screen and expanded memory
- cooperation with a printer and a 2D barcode reader
- WiFi, USB, and LAN communication
- IP67
- suitable where electromagnetic interferences of 400 kV occur
Add to basket
Multi-function Meter (ISO Test Voltage 2500V) | MPI-525
R54,415.00 ex vat

Multi-function Meter - Overview

The Electrical Installation Multifunction MPI-525 is equipment to perform complete tests and verify electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). It is an instrument for measuring electric shock protection, earthing, and earthing resistance with a test voltage of up to 2500V.

Multi-function Meter - Features
- Short-circuit loop measurement:
  - Impedance measurement with 23 A current (44 A phase-to-phase) - short-circuit resistor R=10
  - Measurement range: 95 - 440 V, frequency 45...65 Hz
- Short-circuit loop measurement with resolution 0,01, in distribution network without triggering RCD (In30 mA):
  - Automatic calculation of short-circuit, detection of phase voltage and phase-to-phase voltage
  - Additional UNI-Schuko plug for automatic measurement, AGT adapter for 3 phase network measurement
- Testing of general and selective RCD with the rated differential current of 10,30,100,300,500 and 1000 mA. (Type AC, A and B)
- Measurement of insulation resistance:
  - Test voltage 250 V, 500 V, 1000 V, 2500 V
  - Measurement range up to 10G
  - Automatic discharging after measurement
  - Automatic measurement of all resistances in 3,4,5-wire cables using optional adapter AUTO-ISO
  - Acoustic signals in 5 sec intervals for insulation resistance characteristic
  - Elapsing T₁, T₂, T₃ times (0...600 s) form measurement of absorption coefficients (DAR, PI or Ab₁, Ab₂)
  - Safety measurement - protection against overvoltage
- Measurement of earthing resistance
- Bi-directional testing of PE wire continuity using 200 mA current
  - Autocalibration of test leads
- Phase sequence testing
- Memory is divided into 10 memory banks each of them containing 99 memory cells
- Battery charge indicator
- AUTO-OFF function
- USB interface
Datasheet

Add to basket
Multifunctional Electrical Installations Meter | MPI-507
R30,874.00 ex vat
Multifunctional Electrical Installations Meter - Overview

The MPI-507 is used for precise measurements of electrical installation parameters. Its sleek, compact and ergonomic design holds a wealth of measurement functions. Although it is one of the smallest multifunction meters on the market, it surprises one with its versatility, intuitive operation, and extended capabilities. It has been designed for specialists in the installation and electrical industries, as well as for professional measuring engineers. Its main advantage is the quick measurement of fault loop impedance in circuits with RCD. It measures short-circuit loop parameters, insulation resistance, the resistance of protective and equalising connections, earth resistance, as well as the testing of residual current devices (RCD) of type AC and A. The functions are selected with a rotary switch. Additional parameters are set with buttons located on the housing interface. It is easy to use and priced very competitively. The device settings are saved automatically even when the battery is completely discharged. The backlit display and buttons make it suitable for use in low light. The large memory eliminates the need for taking notes during the measurements. It is suitable for inspecting the safety of electrical systems in households and industrial facilities. Its housing is robust and weather-resistant with an IP67 rating. Bluetooth wireless communication allows easy transfer of data. Use Sonel Reports PLUS software to generate a report on measurements for electric shock protection. Saving the downloaded data to the simplest formats and printing is provided by free Sonel Reader software.

Multifunctional Electrical Installations Meter - Features
- Measurement of short circuit loop parameters
- Testing RCD breakers of AC, A types
- Earth resistance measurement
- Insulation resistance measurement
- Measurement of resistance of protective conductors and bondings
- Phase sequence indication
https://www.youtube.com/watch?v=QdvaEHW-JvM

Add to basket
Portable Appliance Tester Welding | PAT86
R65,286.00 ex vat
Portable Appliance Tester Welding - Overview

Ideal for areas where safety is of particular importance. Suitable to be used on welders, power tools, three-phase appliances, or domestic appliances. The instrument measures parameters such as resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power, RCD, and PRCD. It is especially geared towards testing welding equipment according to the PN-EN 60974-4 standard. It checks the rated voltage of welding equipment in no-load condition, the welding circuit leakage current, and the primary leakage current.

Portable Appliance Tester Welding - Features
- Intuitive user interface
- Cooperation with a label printer and QR code scanner
- Robust, compact housing
- Battery power supply: lasts up to 1 hour (rechargeable)
- Measurement of welding equipment parameters:
  - rated voltage of welding devices in no-load condition
  - welding circuit leakage current
  - primary leakage current
  - protective conductor resistance measurement
  - residual voltage measurement
  - measurement of insulation resistance in three points
  - measurement of substitute, differential, and touch leakage current
  - functional test
  - test of RCD and PRCD switches
Add to basket
2
Power Quality Analyzer | PQM-707
Price range: R52,780.00 through R68,685.00 ex vat

Power Quality Analyzer - Overview

This Power Quality Analyzer allows for versatile measurement, analysis, and registration of energy network parameters DC and 50/60Hz. This includes measuring the quality of electric energy in accordance with the European standard EN 50160. To Guarantee accuracy, all parameters are measured with Class S according to the IEC 61000-4-30 STANDARD.

This is the largest in this class of power quality analyzers and has a 7-inch colour touch screen which enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for work during the measurement without the necessity of connecting an external AC adapter.

The analyzer can be used directly, or indirectly via transformers in virtually all kinds of networks with rated voltage from 54V to 760V. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. With a safety rating of CAT IV 600V, the Power quality analyzer provides peace of mind during everyday use. The PQM-707 can therefore be used in the field of professional power engineering, maintenance services in industrial plants, as well as network analysis.

Power Quality Analyzer - Features
- 7" touch screen 800x480 pixel - intuitive operating
- CAT IV 600V - high safety
- Parameters acc. to class S - high accuracy of measurements
- Li-Ion rechargeable battery - higher mobility
- Removable memory card - recording data with no restrictions
- Possible measurements:
  - Measurements according to EN 50160
  - Voltage L1, L2, L3, N-PE (five inputs)
    
    average, minimum, maximum values, range to 760 V DC and 50/60Hz, ability to work with voltage transformers
  - Current L1, L2, L3, N (four inputs)
    
    average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers
  - Crest factor for voltage and current
  - Frequency from 40 Hz to 70 Hz
  - Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
  - Power recording:
    
    Budeanu method
    
    IEEE 1459
  - Active, reactive, apparent energy
  - Power factor, cosφ, tgφ
  - Up to 50th harmonics for voltage and current
  - Total Harmonic Distortion (THD) for voltage and current
  - Short-term (PST) and long-term (PLT) flicker
  - Unbalance of voltage and current
  - Current and voltage events registration including waveforms and RMS graphs half period
  - Inrush current
  - Calculator of energy tariffs
  - Analyzer measures and records according to the IEC 61000-4-30 class standard
Select options
1
Power Quality Analyser PQM-710 & PQM711
Price range: R122,757.00 through R171,017.00 ex vat

Power Quality Analyser - Overview

These power quality analysers measure, analyse and record network parameters of 50/60 Hz and perform power quality diagnostics according to the European standard EN. PQM-710 is an innovative model with Wi-Fi, which allows for automatic pairing with the included 10" touch tablet. The tablet enables remote operation of the analyser, live data preview, as well as reading and analysis of data stored in the internal memory. With this solution, the PQM-710 is a unique device that combines the advantages of an analyser with built-in display and typical portable analysers (also known as Black Boxes). You can also use the analyser module as a typical logger without a display for multiple measurements. You can very efficiently diagnose the machine under test using the tablet. In practice, the analyser may be used with all network types with rated voltage from 110 V to 760 V, directly or indirectly via transducers.

Power Quality Analyser - Features
- It works in the following networks:
  - one-phase
  - split-phase with N wire
  - three-phase Wye type, with and without N wire
  - three-phase delta type
  - with constant voltage
- Measurements according to EN 50160
- Voltage L1, L2, L3, N-PE
  - average, minimum, maximum and instantaneous values
  - range to 760V
  - ability to work with voltage transformers
- Current L1, L2, L3, N (four inputs)
  - average, minimum, maximum and instantaneous values
  - measurement current with range to 3 kA (depends on used clamp)
  - ability to work with current transformers
- Crest factor for voltage and current
- Frequency from 40Hz to 70Hz
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
- Power recording:
  - Budeanu method
  - IEEE 1459,
- Active, reactive, apparent energy
- Power factor, cosφ, tgφ
- K factor (transformer overload caused by the harmonics)
- Up to 50^th harmonics for voltage and current
- Total Harmonic Distortion (THD) for voltage and current
- Short-term (P_ST) and long-term (P_LT) flicker
- Unbalance of voltage and current
- Current events detection, including waveforms recording
- Current and voltage waveforms recording after each averaging period
- Measure transient Voltages of up to 6000V PQM-711
Suitable for use in power industry, industrial maintenance services, and network analysis services.

Select options
1
Power Quality Analyzer PQM-700
R33,918.00 ex vat

Power Quality Analyser PQM-700 - Overview

Power Quality Analyzers are high-tech devices providing their users with comprehensive features for measuring, analyzing and recording parameters of 50/60 Hz power networks and power quality in accordance with the European Standard EN 50160. The analyzer is fully compliant with the requirements of IEC 61000-4-30:2009, Class S. The device is equipped with four cables terminated with banana plugs, marked as L1, L2, L3, N. The range of voltages measured by the four measurement channels is max. ±1150 V. This range may be extended by using external voltage transducers.

PQM-700 Power Quality Analyzer Features:
- Power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V
- Particular emphasis on measurements at low voltage poles, due to the ease of connection
- Independent power supply socket for voltage measurements for transformers and DC circuits
- Built-in real-time clock
- Measurements according to EN 50160
- Voltage L1, L2, L3, N
  - average, minimum, maximum and instantaneous values
  - range to 760 V
  - ability to work with voltage transformers
- Current L1, L2, L3, N (four inputs)
  - average, minimum, maximum and instantaneous values
  - measurement current with range to 3 kA (depends on used clamp)
  - ability to work with current transformers
- Crest factor for voltage and current
- Frequency from 40 Hz to 70 Hz
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive)
- Power recording:
  - Budeanu method
  - IEEE 1459
- Active, reactive, apparent energy
- Power factor, cosφ, tgφ
- Up to 40th harmonics for voltage and current
- Total Harmonic Distortion (THD) for voltage and current
- Short-term (PST) and long-term (PLT) flicker
- Unbalance of voltage and current
- Current and voltage events registration including waveforms and RMS graphs half period
Add to basket
3-Phase Network Power Analyzer 4 Din Module | UPM209RGW
Price range: R13,760.00 through R20,225.00 ex vat
3-Phase Network Power Analyzer - Overview

The UPM209 is an innovative instrument for measuring and recording of electrical parameters. Particularly suitable for consumption analysis and control, with excellent value for money. The connections are quick and easy, and very useful for energy audits or retrofitting applications on existing switchboards. UPM209 is the ideal instrument to establish the measurement points on the plant.

The instruments can communicate through the RS485 serial port by Modbus RTU/ASCII protocol or through Ethernet port by Modbus TCP protocol. Furthermore, wintoolnet software is available for remote instrument management. A web interface is also available. This very useful function allows one to manage the instrument via a PC connection.

3-Phase Network Power Analyzer - Features
- 4 DIN modules compact version
- Fully bi-directional four quadrants measurements for all energies and powers
- Main electrical parameters measured and displayed for a cost-effective consumption analysis
- 4 available KITs: 30cm Ø 10cm, 45cm Ø 14cm, 70cm Ø 22cm, 90 cm Ø 29cm
- 3 selectable current scales
- Possibility to connect by PT
- Up to 8 MB for data recording
- Possibility to record all energy counters
- Up to 24 parameters selectable among real-time measurements for MIN/AVG/MAX recording
- MODBUS RTU/ASCII communication by RS485 port with Digital Output and remote management with WintoolNET
- MODBUS TCP communication by Ethernet port and remote management with Webserver
Datasheet

Select options
Photovoltaic Meter | PVM-1020
R36,552.00 ex vat
Photovoltaic Meter - Overview

The PVM-1020 photovoltaic meter includes a large collection of measurement functions. The functions are selected with a rotary switch. Additional parameters are set with buttons located on the housing. The graphic display and all the buttons are backlit, ensuring easy reading in shaded areas. Its large memory significantly shortens the preparation time of documents after measurement. Measurement data from the PVM-1020 can be transferred to a computer via Bluetooth wireless communication. The downloaded data can be saved to popular formats and printed using the Sonel Reader software. The optional Sonel Reports software generates reports on electric shock protection.

Photovoltaic Meter - Features
- It can be used for category 1 measurements according to IEC 62446-1
- AUTO mode for a sequence of measurements
- Converts measured parameters into STC conditions according to IEC 60891
- reSYNC function – automatic completion of results
- The built-in LoRa radio interface
- Built-in Bluetooth
- Large measurement memory: 100 objects with 40 cells each
- Backlit display and buttons
Add to basket
Photovoltaic Meter | PVM-1021
R42,278.00 ex vat
Photovoltaic Meter - Overview

This compact photovoltaic system meter has a substantial number of measurement functions. The functions are selected with a rotary switch. Additional parameters are set with buttons located on the housing. All buttons and the graphic display are backlit, which greatly facilitates operation in shaded places. The large memory significantly shortens the preparation of documents after the measurement. The meter performs well in harsh environmental conditions. Protection against the ingress of dust and water is provided by the housing rated at IP54. Measurement data from the PVM-1021 can be transferred to a computer via Bluetooth wireless communication. Saving the downloaded data to popular formats and printing is ensured by Sonel Reader. In order to generate a report on electric shock protection use the optional software:Sonel Reports PLUS.

Photovoltaic Meter - Features
- Used for category 1 measurements according to EN 62446-1
- AUTO mode for performing a sequence of measurements
- Converts measured parameters into STC conditions with the IRM-1
- reSYNC function after restoring connection with IRM-1
- Built-in LoRa radio interface with the IRM-1 over long distances
- Built-in Bluetooth module
- Large measurement memory: 100 objects with 40 cells each
- Backlit display and buttons
Photovoltaic Meter - Parameters
- The open circuit voltage of the PV panel or a chain of panels, up to 1000V DC
- RMS voltage of the AC network up to 600 V with frequency measurement
- Short circuit current of a PV panel or chain of panels - up to 20 A DC
- Insulation resistance of PV panels - measuring voltage of 250, 500 or 1000 V, simultaneous measurement of two values: R_ISO+ and R_ISO-
- Insulation resistance of AC circuits - measuring voltage 250, 500 or 1000 V
- Resistance of protective conductors and equipotential bonding with ± 200 mA current. Low-current resistance measurement, audible and visual signalling
- Measurement of PV panels operating current and AC current - all with external clamp
- AC/DC power Measurement
- Diode test with 200 mA current, automatic polarity detection. Test of blocking diodes with 1000 V DC voltage
Add to basket
Handheld Thermal Imager | KT550

Handheld Thermal Imager - Overview

This thermal imager ensures highly detailed images and accurate measurements. It is an ideal tool for both novice users and professional thermographic inspectors. A large display is protected by a solid housing, ensuring the perfect combination of high efficiency and comfortable work. The comfortable handle and easily accessible buttons make the operation highly ergonomic. Cameras have visual lenses and related image mixing technologies such as PIP and MIF. It has a built-in LED torch and laser pointer. The built-in report module allows for the preparation and printing out of reports directly from the camera. Built-in communication interfaces ensure constant communication between the camera and the computer or mobile device, or wireless network. Thanks to state-of-the-art technologies and solutions, the cameras ensure full control and flexibility in various situations.

Handheld Thermal Imager - Features
- Detector resolution: 640 x 480 / 12 μm
- Image files saved in JPG format
- Recording of IR videos
- Built-in reports module
- MIF image combining mode
- Extensive image analysis tools
- Built-in camera for capturing images within the visible light spectrum
- Built-in: GPS, digital compass, LED flashlight, laser pointer, laser rangefinder
- Interfaces: USB Type-C, Wi-Fi, Gigabit Ethernet, SD memory card slot, Bluetooth
- Digital zoom
- Interchangeable lenses that do not require calibration by the manufacturer
[embed]https://www.youtube.com/watch?v=vc48lANAlHk[/embed]

Read more
Multi-function Electrical Installation Meter | MPI-506
R26,737.00 ex vat

Multi-function Electrical Installation Meter - Overview

This Multifunctional Electrical Installations Meter performs complete tests and verifies electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). The test includes various short circuit loop impedance tests, multiple RCD breaker tests, low voltage resistance measurements of protective circuits, voltage measurements, and frequency measurements.

Multi-function Electrical Installation Meter - Features

Measurement of short circuit loop parameters
- Measurement of short circuit loop impedance in networks with rated voltage: 220/380 V, 230 V/400 V, 240/415 V and frequency 45 - 65 Hz, operating voltage range: 180 - 460 V
- Indication of short circuit loop resistance R and short circuit loop reactance X
- Measurements of short circuit loop impedance with 15 mA current, without tripping the RCD circuit breaker
- Maximum test current: 7.6 A (at 230 V), 13.3 A (at 400 V)
Testing RCD breakers of AC, A types
- Testing of prompt, short-delay and selective RCDs with rated current values 10 | 15 | 30 | 100 | 300 | 500 mA
- Measurement of I_A trip current and tripping time t_A for currents 0.5 I_Δn, 1 I_Δn, 2 I_Δn, 5 I_Δn • R_E and U_B measurement without RCD tripping
- The extended AUTO function of RCD measurement, with the possibility of measuring Z_L-PE with low current
- Measurement of I_A and t_A during one RCD tripping
Insulation resistance measurement
- Test voltage 100 V, 250 V, 500 V
Measurement of resistance of protective conductors and equipotential bondings
- Measurement of protective connections continuity with a ±200 mA current in accordance with EN 61557-4
- Autocalibration of test leads - any leads can be used
- Low current resistance measurement with sound signalling
Phase sequence indication

Additional functions
- Checking the correctness of PE connection using a contact electrode
- Measurement of voltage (0 - 500 V) and network frequency
- The memory of 990 results, wireless data transmission to a computer
- Backlit keypad
Datasheet

Add to basket
5
Solar PV Installation Tester Kit | PV150

Multifunction Solar PV Installation Tester - Overview

Transforming the way PV systems are tested, the PV150 combines ground continuity, DC operating power and operating current test functions in a hand-held device. It can also test insulation resistance, open circuit voltage and short circuit current at the push of a button. The unit can also wirelessly capture and record real-time irradiance, ambient temperature and PV module temperature measurements from the Solar Survey 200R. 200 datasets can be stored on the PV150 and are easily downloaded via the USB connection to the SolarCert software so you can create professional reports for your customers. This tester saves time safely and is easy to use.

Complete Kit Includes:
- Seaward Solar Installation PV150 instrument
- 2 x MC4 test lead adaptors
- 2 x Combiner box test probes and detachable alligator clips (MC4)
- 2 x Test Leads, with test probes and detachable alligator clips (4mm)
- AC/DC current clamp
- Solar Survey 200R irradiance meter and temperature probe
- Solar Survey 200R mounting bracket
- Rugged carry bag
- Quick Start Guide
- UKAS Calibration Certificate (PV150)
- SolarCert PC Software
Solar PV Installation Tester Kit - Features
- Ground (earth) continuity measurement with test lead null for long test-leads
- PV string open circuit voltage measurement up to 1000V DC with polarity
- PV string short circuit current measurement up to 15A
- PV array insulation test at 250/500/1000V.
- Tests individual PV modules or
- Memory for up to 200 records and USB download to PC (CSV file).
- High contrast display, visible in bright
- 2 x MC4 test lead
- 2 x Combiner box test probes and detachable alligator clips (MC4).
- 2 x Test Leads, with test probes and detachable alligator clips (4mm).
- AC/DC current
- Solar Survey 200R irradiance meter and temperature
- Solar Survey 200R mounting bracket
- Rugged carry
- Quick Start
- UKAS Calibration Certificate (PV150).
- SolarCert PC
https://www.youtube.com/watch?v=IWFZ39P1nNg

[embed]https://youtu.be/zH85Edq35W0?list=PLfuAvi1cMoUDi7ZxbRdN4y-7r67DCbn45[/embed]

Read more