Tag: Compressed Air

Compressed Air

  •  1
    Calorimetric Air Flow Meter FTM06C-A

    Calorimetric Air Flow Meter | FTM06C-A

    Calorimetric Air Flow Meter Overview

    This flow meter utilises the calorific measuring principle. Two measuring elements as well as a heat source are located on the measuring tip. The effect of the air flowing through the meter is that heat energy is absorbed and conducted away, resulting in a lower temperature. The resulting temperature change is an indication of flow. This Air Flow Meter is suitable for various severe environments and can therefore be used in slightly corrosive air.

    Calorimetric Air Flow Meter - Features

    • Thermal mass flow
    • Quick response
    • Good sensitivity
    • Turndown ratio 500 ：1
    • High precision & accurate sensing at the lowest flow rate for metering applications
    • Output: Analog / RS-485
    • Use measured with square pipe or 2" pipe above
    • IP rating： IP65
    • Stainless steel casing, suitable for various severe environments
    • Display Cumulative flow / Instantaneous flow

    Read more

  • Thermal Mass Flow Transmitter FTM06D with filter

    Thermal Mass Flow Transmitter | FTM06D

    Thermal Mass Flow Transmitter - Overview

    The FTM06D Thermal Mass Flow Transmitter uses thermodynamic principles to measure air volume and air velocity. There are two temperature sensors inside the probe: one for temperature measurement, and one for temperature measurement after heating. Temperature differences between the two sensors are used to calculate measuring flow rate. This transmitter has all-metal housing and is suitable for a variety of pipe diameters. Widely used in industries like Electronics, Compressed Air, Papermaking, Food, Pharmaceuticals, Biotech, Hospitals, and other factories.

    Thermal Mass Flow Transmitter - Features

    • Thermal mass flow sensor
    • Can measure air volume  and air velocity
    • Analog / RS-485 / Impulse output
    • Accurate measurement
    • Using constant temperature anemometer(CTA) technology, good sensitivity
    • Unit setting：[L/min], [°C], [°F], [m/s], [ft/s], [Nm3/h]
    • Stainless steel housing, suited to a variety of harsh environments
    • Built-in temperature compensation

    https://www.youtube.com/watch?v=9vIttv1x0eo&t=8s

     

    Read more

  • Low Dew Point Probe HC2-LDP

    DEW POINT SENSOR FOR ATEX HC2-LDP-EX

    Overview of Dew Point Sensor for ATEX environments

    Low dew point probe reliably measure trace moisture. The low dew point probe comes with the latest AirChip4000 technology. Calculates a measurement from the average of 8,000 single points within a 2 second interval and, together with the HYGROMER® LDP-1 dew point sensor, delivers measurements of the highest quality. The low dew point probe can be used in compressed air systems, refrigeration driers and adsorption driers. ROTRONIC offers the probe with EX certificate for environments with ATEX requirements. Suitable measurement chambers with a defined air flow rate and a quick connector for optimum dew point measurement are available in POM and stainless steel. The base unit can be used for customization.

    Dew Point Sensor for ATEX environments Features

    • Highly accurate dew point and temperature measurement
    • Withstands pressures up to 100 bar
    • HYGROMER® LDP-1 sensor element
    • Excellent repeatability
    • Trace moisture monitoring at low limits
    • With the latest AirChip4000 measurement technology
    • Compatible with HF5 / HF8 / PF4 transmitters and HP22 / HP23 handhelds

    *Chambers and Transmitters or handhelds sold separately

    Read more