Biotech

In-line Process Oxygen Analyser | OxyExtract

In-line Process Oxygen Analyser - Overview

This In-line O₂ measurement analyser measures O₂ concentration directly in the process gas stream, without the need for complex extractive sampling systems. Applications include the Chemical and Pharmaceutical Industries. The sensor can be removed or replaced without exposing the process to ambient air. The OxyExtract range of IECEx/ATEX approved retractable in-line oxygen sensors, along with the OxyOne Analyser and ACCU Calibration unit, provides a cost-effective solution to meet your process safety requirements. Two basic versions are offered: either manual or automated (pneumatic) insertion and retraction of the sensor probe. The OxyExtract is available in 316 stainless steel and Hastelloy C22 and has a variety of Tri-Clamp and Flange process connections.

In-line Process Oxygen Analyser - Features
- For In-Situ Installation Into Process Gas Streams
- For safety-critical applications
- Manual/automatic actuation
- Available in 316 stainless steel and Hastelloy C22
- ATEX-approved for hazardous area applications
- Tri-clamp and flanged process connections available
- Measurement range of 0 to 25% O₂
Read more
Industrial Grade High Mass Flow Transmitter | FTM94/95
Price range: R37,101.00 through R56,801.00 ex vat
Industrial Grade High Mass Flow Transmitter - Overview

This industrial-grade thermal mass flow transmitter is housed in a rugged aluminium alloy case, making it suitable for use in a variety of harsh environments. It has a high accuracy level and long-term stability. It comes as either a duct or remote type installation and is easy to install. Suitable for a wide range of pipe diameters. The Thermal Mass Flow transmitter has an LCD Display for air velocity and temperature and has the option to display cumulative flow: m³, L. It can also switch between the following measurements for air velocity and volume: [m/s],[ft/s],[Nm³/h],[Nm/s],[L/min], and [m³/min].

Industrial Grade High Mass Flow Transmitter Features
- IP67 Rugged aluminium alloy case
- Fit for use in a variety of harsh environments
- Easy to install
- High accuracy
- Long-term stability
- Switchable physical quantities: Nm/s, L/min, m³/min (Air velocity & volume), m/s, ft/s, Nm³/h,
- LCD Display of cumulative flow: m³, L (Optional)
- LCD Display of air velocity and temperature
Select options
Air Velocity Transmitter | FTS34/35
Price range: R9,240.00 through R9,273.00 ex vat
Air Velocity Transmitter - Overview

The Air Velocity Transmitter is a Thermal Mass Flow Sensor / Transmitter using the mass flow measuring principle. This transmitter is able to switch between measuring units [m/s], [ft/s], [km/h], [mph], [knot], and is available in either duct or remote type installation. The Air Velocity Transmitter uses stable electronics with good accuracy. It has solid performance and low flow sensitivity. It is suitable for use in industrial processes to monitor gas and flow and is widely used in the Building, Pharmaceutical, Paper, and Biotech industries.

Air Velocity Transmitter Features
- Linear calibration function
- Option RS-485 Communication Interface, Modbus RTU protocol
- Configuration measuring rage, analog output, station number by dip switch & RS-485
- Switch for physical quantity： [mph], [knot], [m/s], [ft/s], [km/h],
- Off SET function by bottom or RS-485
- Programmable software: DATA LOGGER, record, and chart analysis
Select options
Temperature and Humidity Transmitter EX-Series | THM14EX
Price range: R16,610.00 through R18,686.00 ex vat
Temperature and Humidity Transmitter - Overview

The THM14EX is used to measure relative humidity or temperature in air and other non-aggressive gases, that is in an explosion hazardous area or a location with flammable dust.

Temperature and Humidity Transmitter - Features
- IP rating: IP 66
- Rugged aluminium case
- Stainless steel probe
- High measurement accuracy
- High long-term stability
Select options
Thermal Mass Flow Transmitter | FTM06D

Thermal Mass Flow Transmitter - Overview

The FTM06D Thermal Mass Flow Transmitter uses thermodynamic principles to measure air volume and air velocity. There are two temperature sensors inside the probe: one for temperature measurement, and one for temperature measurement after heating. Temperature differences between the two sensors are used to calculate measuring flow rate. This transmitter has all-metal housing and is suitable for a variety of pipe diameters. Widely used in industries like Electronics, Compressed Air, Papermaking, Food, Pharmaceuticals, Biotech, Hospitals, and other factories.

Thermal Mass Flow Transmitter - Features
- Thermal mass flow sensor
- Can measure air volume and air velocity
- Analog / RS-485 / Impulse output
- Accurate measurement
- Using constant temperature anemometer(CTA) technology, good sensitivity
- Unit setting：[L/min], [°C], [°F], [m/s], [ft/s], [Nm³/h]
- Stainless steel housing, suited to a variety of harsh environments
- Built-in temperature compensation
https://www.youtube.com/watch?v=9vIttv1x0eo&t=8s

Read more