Tag: Fitters

Home -> Tag: Fitters

Fitters

5
CMP-200 Clamp-On AC Leakage Current Meter
R1,504.00 ex vat

Clamp-On AC Leakage Current Meter - Overview

The CMP-200 digital clamp meter is designed for clamp measurements of AC leakage current.

Clamp-On AC Leakage Current Meter - Features
- high resolution (0,1 mA)
- three measuring ranges: 200 mA, 2 A, 200 A
- display LCD 3½ digits (max 1999)
- white LED backlight
- internal diameter clamp approx. 30 mm (1,2")
- DATA HOLD function, for holding measured values
- MAX function
- AUTO-OFF function
- double moulded casing
Add to basket
1
Advanced Industrial Digital Multimeter | CMM-60
R12,861.00 ex vat

Advanced Industrial Digital Multimeter - Overview

The CMM-60 multimeter allows you to record data thanks to the Trend Capture function showing a historical graph from the built-in memory. It is also possible to transfer data and analyse the results in the Multimeter Software. The device facilitates the diagnostics of potential problems covering the operation of industrial automation, electromechanical devices, motors and distribution of electricity. Precise indications, the convenience of use and early detection of irregularities in the operation of machines and devices are the main benefits of having this device in your equipment. All whilst adhering to strict safety requirements during work in industrial conditions.

Advanced Industrial Digital Multimeter - Features
- Colour display with a counting range of up to 50,000 digits
- Allows reading at a wide-angle in poor lighting conditions
- Quickly detect irregularities due to measurement results displayed in graphical form
- Over 14 measurement functions
- Display the value of the constant and variable component or the sum during voltage measurement
- The 4~20mA function for measurement of the control circuits of temperature, pressure, pH or flow sensors
- True RMS for AC voltage and current allows measuring the effective value of distorted waveforms
- Built-in low-pass filter
- Save results of fast 1ms waveforms thanks to the PEAK value measurement function
- Relative measurement function allows elimination of resistance values of test leads
- Display the result of the measurement of the constant and alternating components of the signal simultaneously
- Real-time clock to add date and time of measurement to each sample
- Recalling measurement results from the built-in memory for 2000 measurements
- Registration of maximum and minimum values
- Calculation of the average of current measurements
- Built-in Bluetooth
- HELP function
- Optional strap with a hook
- IP67 protection level
- The rotary switch has been designed for easy handling
- Dedicated lithium-polymer battery
- A dedicated charger and power supply for charging the battery without removing it
"m.v." means a standard measured value

Add to basket
2
True RMS Industrial Digital Multimeter CMM-40
R4,513.00 ex vat

Industrial Digital Multimeter - Overview

This Industrial Digital multimeter CMM-40 was designed for measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature, testing diodes and continuity. It is a Cat IV Digital multimeter rated up to 600V or Cat III up to 1000V.

Industrial Digital Multimeter - Features
- 2 Years Warranty
- Auto/manual range selection
- display 4¾ digits (40000 max)
- "DATA HOLD” function, for holding measured values
- "REL” function, comparing measurements relative to a stored reference value
- "MAX/MIN” function
- "PEAK HOLD” function
- memory for 2000 measurement results
- continuity test with acoustic signalling (beeper)
- "AUTO-OFF” function
- double moulded, IP65 waterproof casing
Add to basket
1
Industrial Multimeter With Bluetooth | CMM30
R3,836.00 ex vat

Industrial Multimeter CMM30 - Overview

The Industrial Multimeter with Bluetooth CMM-30 model is a device from a new generation of industrial multimeters that combines versatility, modernity, and extraordinary durability. The instrument comes with 11 basic measurement functions together with additional functions to provide a wide range of applications. The smartphone app enables remote reading and saving of measurements, even from places with difficult access thanks to wireless communication. The backlight of the device automatically adjusts the brightness level of the screen and the control panel to the prevailing conditions, while the built-in flashlight allows working in the dark. The innovative design combines drop protection, IP67 casing, and ease of use, even with dielectric gloves. This device is created for electricians who value quality and innovation.

Industrial Multimeter CMM30 - Features
- 11 measurement functions
- AC/DC voltage measurement
- AC/DC measurement
- Resistance measurement
- Capacity measurement
- Temperature measurement
- Duty Cycle measurement
- Frequency measurement
- Manual and Automatic range selection
- Simultaneously display the sum of DC and AC components
- HOLD function to capture stable readings of noisy signals
- Recording maximum/minimum/average values
- Relative measurements
- Display the peak value of the measured signal
- True RMS for AC voltage and current
- Built-in Bluetooth for wireless communication
- Beeper for circuit continuity
- Built-in flashlight
- Automatic backlight
- Robust housing with IP67 protection
- Rotary switch designed for easy handling
- Increased drop protection
- Auto-OFF function
- 6000 counts display
- An optional strap with a hook
Datasheet

Add to basket
3
Modern Digital Multimeter with Flashlight, Bluetooth and IP65 Rated | CMM-11
R2,219.00 ex vat

Modern Digital Multimeter - Overview

This Digital multimeter is the perfect solution for every electrician, fitter, installer and maintenance crew. The CMM-11 multimeter is designed for quick diagnostics of devices and electric circuits. Thanks to an ergonomic design and pocket size, CMM-11 will find a place in every tool bag and will not take much space. It has all the basic measuring functions you would come to expect of a modern-age digital multimeter. Due to the rubberised housing, it will resist falls up to 2,5 meters from mechanical damage.

Modern Digital Multimeter - Features
- manual and automatic range selection
- Cat III 600V Rated
- built-in flashlight
- HOLD function for holding measured values
- MAX/MIN function for displaying extreme values
- compact housing
- increased resistance to falls
- beeper for sound signal circuit continuity
- auto-OFF function
- display 3¾ digit (count max 4000)
Add to basket
Portable Appliance Tester | PAT-10
R23,842.00 ex vat

Portable Appliance Tester - Overview

The innovative small dimensions make this PAT tester truly portable. With its advanced measuring systems it will allow you to carry out fully automated measurements for electrical equipment. Options can be freely configured to suit the user's needs. Alternatively, switch it to manual mode to perform individual tests. All meters in this (PAT) range allows you to make basic measurements without external power in emergency situations as one can easily run a simplified set of test in battery mode.
The small size, weight, and specially designed carrying case of the meter and accessories provide comfort and high mobility. Wireless communication to the printer is hassle-free without unnecessary cables. Storage and integration of the results in PC software further extend the functionality of the instrument.

View a simulation here: https://www.sonel.pl/simulators/pat-10/

Portable Appliance Tester - Features

Wifi Enabled

Works with a portable printer

LED test results indication

Quick access to the measurement procedures

Measurement of insulation resistance

PRCD trip time testing

Measurement of equivalent, touch and differential leakage current

IEC lead test

Measurement of mains voltage

Measurement of protective conductor resistance with the currents: 200 mA, 10 A

Automatic range selection

Compact design, ergonomic soft case

Works with the program Sonel Reader and Sonel PAT (option)

[embed]https://youtu.be/Nq6Tr9HG6Kc[/embed]

[embed]https://youtu.be/GxtfTssNo8o[/embed]

[embed]https://youtu.be/aP1IYwetw4c?list=PLICwL6VglKz0euP0AL5y7aEDgVFxkZ183[/embed]

[embed]https://youtu.be/26qo36ZVBKs?list=PLICwL6VglKz0euP0AL5y7aEDgVFxkZ183[/embed]

https://youtu.be/826nqwf-I5U?list=PLICwL6VglKz0euP0AL5y7aEDgVFxkZ183
Add to basket
Bipolar Voltage Indicator P-4
R2,783.00 ex vat

Bipolar Voltage Indicator P-4 - Overview

The SONEL P-4 is an extremely durable, reliable and safe to use bipolar voltage indicator with additional circuit continuity and phase sequence checking functions. It was designed to work in the most difficult conditions, both industrial and commercial. Advanced technology, high-level safety and simplicity of use are key features of the P series devices.

Bipolar Voltage Indicator P-4 - Features:
- automatic measurement of alternating and direct voltage up to 1000 V
- optical indicator using a diode line
- sound indicator when hazardous voltages are exceeded 50 VAC and 120 VDC
- testing of RCD operation using an additional load
- continuity indication automatically after connecting to the facility
- bipolar phase rotation direction test
- unipolar indication of voltages above 100 V
- reinforced two-component housing preventing mechanical damage and falls
- IP65 level guarantees dust and damp protection
- safety thanks to CAT IV 600 V and CAT III 1000 V measurement categories
- built-in flashlight
Add to basket
4
Economical Cat II 600V Digital Multimeter | CMM-10
R940.00 ex vat

Economical Digital Multimeter - Overview

An economical Cat II 600V digital multimeter with auto & manual range selection. It also includes a HOLD function to keep a measured value. The REL function gives value relative to a previous measured function. The Digital Multimeter CMM-10 has been designed for the purpose of measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, temperature and also for testing diodes and continuity.

Economical Digital Multimeter - Features
- Auto/Manual range selection
- DATA HOLD function, for holding measured values
- REL function - measurements relative to a stored value
- Continuity test with acoustic signalling (beeper)
- AUTO-OFF function
- Display 3 7/8 digits (5000 max)
Add to basket
Bipolar Voltage Indicator P-5
R4,024.00 ex vat

P-5 Voltage Indicator - Overview

SONEL P-5 is an extremely durable, reliable and safe to use bipolar voltage indicator with additional circuit continuity and phase sequence checking functions. It was designed to work in the most difficult conditions, both industrial and commercial. Advanced technology, high-level safety and simplicity of use are key features of the P series devices. The P-5 model can perform resistance measurements up to 2 kΩ and has an LCD display that allows you to accurately display voltage and resistance values.

P-5 Voltage Indicator - Features
- automatic measurement of alternating and direct voltage up to 1000
- optical indications by means of a diode line and additionally an LCD display
- sound indications when hazardous voltages are exceeded 50 VAC and 120 VDC
- testing of RCD operation by means of an additional load
- continuity indication, automatically after connecting to the object
- bipolar phase rotation direction test
- unipolar indication of voltages above 100 V
- resistance measurement up to 1999 Ω
- possibility of stopping the measurement result thanks to the HOLD function
- reinforced two-component housing preventing mechanical damage and falls
- built-in flashlight and backlight display for measurements in insufficient lighting
- degree of protection at IP65 level guarantees dust tightness and protection against flooding
- safety thanks to the CAT IV 600 V and CAT III 1000 V measurement categories
Add to basket
3
Time Domain Reflectometer | TDR-420
R32,905.00 ex vat
Time Domain Reflectometer - Overview

TDR-420 is a handheld Time Domain Reflectometer designed to locate and identify faults in power, telecommunications and data cables. Specifically made for electrical wholesalers, cable dealers, electrical installation companies, maintenance personnel at manufacturing plants and building personnel. This TDR-420 reflectometer allows you to measure the length of a cable as well as determine the distance to damage or impedance variation in conductors with metal wires in the range of 0.6 m -6000 m. With a measuring shortest range selected at 7 meters and a dead zone of 0.6 meters, this allows one to locate damages at a very close distance from the place where the device is connected.

Time Domain Reflectometer - Features
- Damage-free location of impedance changes of cables and wires such as:
  - shorted conductor
  - open conductor/end of cable
  - splice
  - splitter
  - water ingress
  - wet splice
  - bridge tap
- Tight and durable housing
- IP67 ingress protection degree
- Small size and weight
- Single measurement mode
- Continuously measurement mode
- Tone signal generator
- Two cursors to mark two places of damage & distance between them
- Built-in HELP function for easier interpretation
- 11 available measuring ranges from 7 m to 6000 m
- dead zone” limited to 0.6 m
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels
- manually set sensitivity in 8 steps
- output impedance regulation up to 200 Ω
- Velocity of Propagation set from 10% to 99%
[embed]https://youtu.be/abBNwDADJ-k[/embed]

Add to basket
1
Multi-function Electrical Installations Meter | MPI-502F
R20,344.00 ex vat

Multi-function Electrical Installations Meter - Overview

This Multi-functional Electrical Installations Meter tests and verifies electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). Tests include various short circuit loop impedance tests, multiple RCD breaker tests, low voltage resistance measurements of protective circuits, voltage measurements, and frequency measurements.

Multi-function Electrical Installations Meter Features
- Short circuit loop parameters measurements:
  - measurements of short circuit loop impedance in networks with rated voltage: 220/380 V, 230 V/400 V, 240/415 V and frequency 45...65 Hz
  - measurements of short circuit loop impedance with current 15 mA without tripping the circuit breaker
- Testing the RCD breakers of AC, A types:
  - testing of prompt, short-delay (general) and selective RCDs for the rated current values 10, 30, 100, 300, 500 mA
  - IA measurement
  - RE and UB measurement without tripping the circuit breaker
  - extended RCD test function AUTO, with measurement of Z_L-PE with current 15 mA - measurement of I_A and t_A during one RCD tripping.
- Detection of the replacement L and N in the socket and automatic conversion in the meter
- Low voltage resistance measurements of protective circuits and junctions:
  - measurement of resistance with ±200 mA current
  - calibration of test leads - possibility of using any length of test leads
  - low current resistance measurement with acoustic signalling
- Rapid check for the correct connection of PE wire using touch electrode
- Measurement of mains voltage and frequency
- Power supply from LR6 batteries or NiMH accumulators (option)
- The device meets the requirements of IEC 61557 standard
- measurement category: IV 300 V (III 600 V) according to EN 61010 - 1
- protection class acc. to EN 60529: IP67
Add to basket
Earth Resistance Meter MRU-10
R11,733.00 ex vat

Earth Resistance Meter - Overview

The Sonel MRU-10 is a simple meter that allows you to measure earthing resistance using technical methods. It also measures grounding resistance using the pole method. The instruments are easy to handle, intuitive, resistive to interference, and accurate. This unit checks the quality of the grounding system based on the received measurement result. The device is an excellent choice for electrical technicians, installation contractors and professionals dealing with grounding measurements. This Earth Resistance meter is durable with firm housing and has a big and clear display with an ergonomic design. Ideal to use both in the field and in most working environments.

Earth Resistance Meter - Features
- Measure earthing resistance using auxiliary electrodes method 2-pole and 3-pole
- Measurement of resistance of auxiliary electrodes RS and RH
- Measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz
- Selection of maximum measuring voltage (25 V and 50 V)
- Measurement category: CAT IV 150 V acc. to EN 61010-1
- Protection class acc. to EN 60529: IP67
- Indication of battery state
- LCD display: segment, backlit,
- Number of measurements (RE3P) carried out of set of batteries: > 3000
Add to basket
Phase Sequence and Motor Rotation Tester | TKF-13
R3,949.00 ex vat

Phase Sequence and Motor Rotation Tester - Overview

The TKF-13 tester is a modern, high-quality, simple and safe phase sequence or motor rotational tester. However, it is recommended to acquaint oneself with the manual to avoid measuring errors and prevent possible problems related to the meter's operation.

Phase Sequence and Motor Rotation Tester - Features
- Type of insulation: double, according to EN 61010-1
- Safety category: CAT III 600V acc. to EN 61010-1
- Ingress Protection class acc. to EN 60529: IP42
- Rated phase-to-phase voltage range: 120... 690 V AC
- Maximum operation phase-to-phase voltage: 760 V AC
- EMF motors voltage range: 1...760 V AC
- Frequency range: 2...70 Hz
- Diode flashing time of battery state: approx. 1 s
- Function auto-off: 5 min
Add to basket
Phase Sequence Tester | TKF-12
R2,369.00 ex vat

Phase Sequence Tester - Overview

The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

Phase Sequence Tester - Features
- Type of insulation: double, according to EN 61010 - 1
- Safety category: CAT III 600 V acc. to EN 61010 - 1
- Ingress protection class acc. to EN 60529: IP42
- rated phase-to-phase voltage range: 120...690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10...70 Hz
- power supply: from the tested electrical installation, up to 15 min for max. voltage
Add to basket
RCD Tester | MRP-201
R18,840.00 ex vat

Residual Current Device Tester - Overview

The RCD helps to protect against shock when current flows through a person from a phase to earth. Testing the operating conditions of an RCD is essential to make sure the safety levels remain.

The MRP-201 RCD tester can be used on breakers of AC, A and B types. It does testing of general, short delay and selective RCDs for the rated current values I_Δn =10, 30, 100, 300 and 500 mA. Measurement of tripping current I_A and disconnection time.Ability to measure touch voltage U_B and earth resistance R_E without tripping. With AUTO RCD test function.

Residual Current Device Tester - Features
- Testing general, short delay and selective RCDs for the rated current values I_Δn =10, 30, 100, 300
- Simultaneous measurement tripping current I_A and disconnection time t_A, for currents
  - 0,5I_Δn
  - 1I_Δn
  - 2I_Δn
  - 5I_Δn
- Measure touch voltage U_B and earth resistance R_E without tripping
- AC voltage and frequency measurement
- PE lead connection check using a touch electrode
- Built-in memory for up to 990 sets of measurement results
- Wireless radio communication interface
- Professional software for reading data and creating reports
Add to basket