Tag: Electricians

Home -> Tag: Electricians

Electricians

4
Pyrometer Infrared Thermometer | DIT-500
R8,950.00 ex vat

Pyrometer Infrared Thermometer - Overview

Professional and compact infrared thermometers are a solution for problems where specific thermal conditions are required. The intuitive one-handed operation of the device and the ergonomically designed gun-type housing allow for trouble-free daily work. Infrared is used to determine the surface temperature of the tested object. The optical system of the instrument detects the radiation that is emitted, reflected and transmitted, then gathers it and focuses it in the detector. The electronic system converts the optical data into a temperature value. To increase the precision of measurement and facilitate targeting, the device is equipped with a laser pointer.

Pyrometer Infrared Thermometer - Features
Precise

Non-contact temperature measurement

Type K temperature measurement

Ergonomic gun-type housing

Resolution 0.1°F (0.1°C)

Emissivity digitally adjustable from 0.10 to 1.00

°C/°F switch

Automatic range selection

High and low alarm

DATA HOLD function for holding measured values

Temp display max, min, average and difference

Trigger lock

AUTO-OFF function

Rapid reaction to temperature changes (below 150 ms)

Double laser sight (determination of the measurement area)

Data memory (LOG) for 100 measurements

Transmission of current readings to computer via USB cable

Backlit LCD display
Add to basket
1
Multi-function Electrical Installations Meter | MPI-502F
R20,344.00 ex vat

Multi-function Electrical Installations Meter - Overview

This Multi-functional Electrical Installations Meter tests and verifies electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671). Tests include various short circuit loop impedance tests, multiple RCD breaker tests, low voltage resistance measurements of protective circuits, voltage measurements, and frequency measurements.

Multi-function Electrical Installations Meter Features
- Short circuit loop parameters measurements:
  - measurements of short circuit loop impedance in networks with rated voltage: 220/380 V, 230 V/400 V, 240/415 V and frequency 45...65 Hz
  - measurements of short circuit loop impedance with current 15 mA without tripping the circuit breaker
- Testing the RCD breakers of AC, A types:
  - testing of prompt, short-delay (general) and selective RCDs for the rated current values 10, 30, 100, 300, 500 mA
  - IA measurement
  - RE and UB measurement without tripping the circuit breaker
  - extended RCD test function AUTO, with measurement of Z_L-PE with current 15 mA - measurement of I_A and t_A during one RCD tripping.
- Detection of the replacement L and N in the socket and automatic conversion in the meter
- Low voltage resistance measurements of protective circuits and junctions:
  - measurement of resistance with ±200 mA current
  - calibration of test leads - possibility of using any length of test leads
  - low current resistance measurement with acoustic signalling
- Rapid check for the correct connection of PE wire using touch electrode
- Measurement of mains voltage and frequency
- Power supply from LR6 batteries or NiMH accumulators (option)
- The device meets the requirements of IEC 61557 standard
- measurement category: IV 300 V (III 600 V) according to EN 61010 - 1
- protection class acc. to EN 60529: IP67
Add to basket
Earth Resistance Meter MRU-10
R11,733.00 ex vat

Earth Resistance Meter - Overview

The Sonel MRU-10 is a simple meter that allows you to measure earthing resistance using technical methods. It also measures grounding resistance using the pole method. The instruments are easy to handle, intuitive, resistive to interference, and accurate. This unit checks the quality of the grounding system based on the received measurement result. The device is an excellent choice for electrical technicians, installation contractors and professionals dealing with grounding measurements. This Earth Resistance meter is durable with firm housing and has a big and clear display with an ergonomic design. Ideal to use both in the field and in most working environments.

Earth Resistance Meter - Features
- Measure earthing resistance using auxiliary electrodes method 2-pole and 3-pole
- Measurement of resistance of auxiliary electrodes RS and RH
- Measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz
- Selection of maximum measuring voltage (25 V and 50 V)
- Measurement category: CAT IV 150 V acc. to EN 61010-1
- Protection class acc. to EN 60529: IP67
- Indication of battery state
- LCD display: segment, backlit,
- Number of measurements (RE3P) carried out of set of batteries: > 3000
Add to basket
Phase Sequence Tester | TKF-12
R2,369.00 ex vat

Phase Sequence Tester - Overview

The Phase Sequence Tester TKF-12 is a modern, high-quality, simple to use and safe device. It is recommended to acquaint oneself with the manual to avoid measurement errors and prevent possible problems.

Phase Sequence Tester - Features
- Type of insulation: double, according to EN 61010 - 1
- Safety category: CAT III 600 V acc. to EN 61010 - 1
- Ingress protection class acc. to EN 60529: IP42
- rated phase-to-phase voltage range: 120...690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10...70 Hz
- power supply: from the tested electrical installation, up to 15 min for max. voltage
Add to basket
RCD Tester | MRP-201
R18,840.00 ex vat

Residual Current Device Tester - Overview

The RCD helps to protect against shock when current flows through a person from a phase to earth. Testing the operating conditions of an RCD is essential to make sure the safety levels remain.

The MRP-201 RCD tester can be used on breakers of AC, A and B types. It does testing of general, short delay and selective RCDs for the rated current values I_Δn =10, 30, 100, 300 and 500 mA. Measurement of tripping current I_A and disconnection time.Ability to measure touch voltage U_B and earth resistance R_E without tripping. With AUTO RCD test function.

Residual Current Device Tester - Features
- Testing general, short delay and selective RCDs for the rated current values I_Δn =10, 30, 100, 300
- Simultaneous measurement tripping current I_A and disconnection time t_A, for currents
  - 0,5I_Δn
  - 1I_Δn
  - 2I_Δn
  - 5I_Δn
- Measure touch voltage U_B and earth resistance R_E without tripping
- AC voltage and frequency measurement
- PE lead connection check using a touch electrode
- Built-in memory for up to 990 sets of measurement results
- Wireless radio communication interface
- Professional software for reading data and creating reports
Add to basket
Time Domain Reflectometer | TDR-410
R28,542.00 ex vat

Time Domain Reflectometer - Overview

TDR-410 time-domain reflectometers are designed to detect the location of faults in metal wires. These products are designed for electrical wholesalers, cable dealers, electrical installation companies, maintenance personnel at manufacturing plants and building personnel.

SONEL reflectometers are known for their long range, up to 4,000 m for the TDR-410, very low margin of 1% error in measurement, and the ability to adjust both the velocity of propagation and the impedance of the cable which is under investigation. Two cursors indicate the distance to 2 faults and the distance between them.

Cable fault location Includes:
- Locate damaged power cables
- Fault location for copper telecom cables
- Coaxial cable fault location
- Fault location for wiring infrastructure
- Detection of breaks, short circuits and damage
- Graphic depiction of damage to cable
- Automatic indication of the distance to fault
Time Domain Reflectometer - Features:
- Automatic or manual mode:
  - Automatic fault location (AFL)
  - Manual range selection and sensitivity
  - Scan continuous or single measurement
- Ranges from 7 m to 4000 m
- "Dead zone" measure limited to 0.5 m
- Backlit 2.5 " LCD screen
- Scan automatically or manually trigger
- Manually or automatically adjust sensitivity
- Impedance matching
- Propagation coefficient adjustment 1% to 99%
- Water-resistant housing
- Small size and weight
- Extended battery life of 30 hours
Add to basket
Loop Impedance Meter | MZC-304
R16,170.00 ex vat

Loop Impedance Meter - Overview

The MZC-304 meter is designed for testing the protection against electric shock in the mains systems. The meter is used to make measurements which determine the electrical installation safety level.

Loop Impedance Meter - Features
- Measurements of impedance in a short circuit loop
  - L-PE circuit
  - L-N, L-L circuit
  - L-PE(RCD) circuit - without tripping the circuit breaker ≥ 30 mA
- Low voltage resistance measurement
- Continuity measurement - DC current +200 mA with wire resistivity rest
- Low current resistance measurement with acoustic signalling
- The measurements are possible in installations 220/30 V, 240/415 V with frequency range 45...65 Hz
- Memory of 10 banks of 99 cells each (min. 10000 records)
- Radio wireless interface communication
Add to basket
Short-Circuit Loop Impedance Meter MZC-20E
R8,800.00 ex vat

Short-Circuit Loop Impedance Meter - Overview

The meter has been designed for fitters and measurement technicians performing services in residential buildings, office blocks, manufacturing plants and any facilities possessing a low-voltage electrical system. The instrument is also recommended for electrical maintenance personnel.

Short Circuit Loop Impedance Meter - Features
- power supply LR6 alkaline batteries or NiMH rechargeable AA batteries (4 pcs.)
- dimensions 220 x 98 x 58 mm
- instrument weight incl. batteries 509g
- storage temperature -20...+70 C^o - working temperature -10...+50 C^o
- humidity 20...80%
- reference temperature +23 ± 2 C^o
- reference humidity 40...60%
- altitude < 2000m
- Auto-OFF time max. 900 sec.
- number of Z measurement (for rechargeable batteries) >5000 (2 measurement/minute)
- display LCD segment
- type of insulation double, according to EN 61010-1 and IEC 61557
- measurement category III 300 V according to EN 61010-1
- protection class acc. to EN 60529 IP67
- quality standard developed, designed and manufactured acc. to ISO 9001
- the instrument is compliant with the requirements of IEC 61557
- the instrument complies with PN-EN 61326-1:2006 and EN 61326-2-2:2006
Add to basket
4
Multi-function Electrical Installation Meter | MPI-540
Price range: R64,493.00 through R106,648.00 ex vat
Multi-function Electrical Installation Meter - Overview

The MPI-540 meter has models for home and industrial electrical installations, photovoltaic installations and vehicle charging stations. Measurements taken by these devices determine the safety of the installation. The user also has the option to register the parameters of the electrical network's location.

Verification of the quality of electricity and measurement of the parameters that protect against electric shock is easy with this single, universal device. This superior meter combines the measurement capabilities of several devices while ensuring quality and accuracy. Significant automation of measurements with the meter makes it possible to test functioning of residual current circuit breaker in the auto mode, as well as in pre-programmed measuring sequences (so-called auto-tests), which can also be extended with your own sequences. Automatic measurement of insulation resistance of 3-, 4- and 5- wire conductors is possible by using additional the AUTO ISO-1000C adaptor.

This device is ideal for all measurements for the commissioning of electrical installations in accordance with applicable regulations.

Multi-function Electrical Installation Meter - Features
- 7 " TFT LCD touch screen with a resolution of 800 x 480 pixels
- Removable memory card - easy increase of memory capacity
- One device can be used for all measurements for commissioning of electrical installations in accordance with applicable regulations:
  - short circuit loop impedance (also in circuits with RCDs)
  - parameters of RCDs
  - insulation resistance
  - earthing resistance (4 measurement methods + ground resistivity measurement)
  - continuity of protective and equipotential bondings
  - lighting measurement
  - phase sequence tester
  - motor rotation direction tester
- three-phase power network data logger can record 50/60 Hz power network parameters in acc. to S class of EN 61000-4-30:
  - voltage L1, L2, L3, - average values in the range up to 500 V,
  - L1, L2, L3 currents, - average values, current measurement in the range up to 3 kA (depending on the current clamps used)
  - frequency in the range of 40Hz - 70Hz
  - active (P), reactive (Q) and apparent (S) power
  - power factor (PF), cosφ
  - harmonics (up to 40 in voltage and current)
  - total harmonic distortion (THD) for current and voltage
https://www.youtube.com/watch?v=y6kt_aElw58

CONTACT US FOR MORE OPTIONS

Select options
3
Digital Clamp-on Multimeter | CMP-2000
R4,776.00 ex vat

Digital Clamp-on Multimeter - Overview

Universal clamp meter, enabling the measurement of current up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm. The instrument has electronic overload protection for all functions and ranges.

Digital Clamp-on Multimeter - Features
- Safe, insulated measuring clamp
- Auto-ranging with over range indication
- "DATA HOLD” function, for holding measured values
- Backlit LCD
- "MAX/MIN” function
- "AUTO-OFF” function after 30 min
- "DC ZERO” possibility to zero the display & reading relative actual value less stored "zero” value
- AC/DC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A
- Measurement INRUSH current in start-up phase of electrical device
- AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V
- Resistance measurement and continuity test with acoustic signalling (beeper) for resistance below 30 Ω
- Capacitance measurement
- Temperature measurement
- Frequency measurement
- Duty cycle measurement
- Diode test
- Continuity test with acoustic signalling (beeper) for resistance below 30 Ω
Add to basket
AC Voltage Detector Pen | VT-2
R489.00 ex vat

Voltage Detection Pens

This easy use Non-contact AC Voltage tester. Just touch the tip to a terminal strip, outlet, or supply cord and the tip glows red and the unit beeps. This makes it easy to know whether there is voltage present. Electricians, maintenance, service, safety, personnel, and homeowners can quickly test for energised circuits in the workplace or at home.

Voltage Detection Pen Features:
- Rugged, double moulded case
- Non-Contact Detection of AC Voltage from 90 VAC to 1000 VAC
- Suitable for outlets or against wire insulation testing
- Flashing red LED light indicator
- Audible beeper indicator
- Built-in bright flashlight with ON/OFF button
- Convenient size with pocket clip
- For use on 50/60 Hz circuits
- Supply by 2 x 1,5 V batteries (LR03)
Add to basket
1
CMP-1006 Digital Clamp-On Multimeter
R2,825.00 ex vat

Digital Clamp-On Multimeter - Overview

Digital Clamp-on multimeter which is designed to measure INRUSH current in start-up phase of electrical device (high frequency of sampling). AC/DC voltage measurement (TRUE RMS) up to 600 V.

Digital Clamp-On Multimeter - Features
- Resistance measurement and continuity test with acoustic signalling
- Temperature measurement (Fahrenheit and Celsius)
- Frequency measurement
- Duty cycle measurement
- Diode test
- Safe, insulated measuring clamps
- Auto/manual range selection
- DATA HOLD function, for holding measured values
- Backlit LCD
- DC ZERO mode to zero the display and reading relative actual value less stored zero value
- MAX/MIN function
- Over range indication
- AUTO-OFF function
Add to basket
MIC-2501 Insulation Resistance Tester/Meter
R18,539.00 ex vat
MIC-2501 Insulation Resistance Tester/Meter - Overview

A very handy tool for measuring Insulation resistance with up to 2500V. It can measure up to 1TOhms in accordance with IEC61557-2. Comes with a convenient carry case which has straps to free up your hands during operations.

MIC-2501 Insulation Resistance Tester/Meter - Features
- Selectable voltage in the 100…2500 V range with 100 V step
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of capacitance of tested object after the insulation resistance measurement
- Acoustic signalling of five-second periods to facilitate obtaining time characteristics
- Measured test times T₁, T₂ i T₃ to measure one or two absorption coefficients in 15, 60 and 600 s
- Indication of actual test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement methods
- Continuity measurement of protective and equipotential conductors according to EN 61557-4
- Leakage current measurement
- Alternating and direct voltages in the 0...750 V range
- Built-in rechargeable battery pack
- The instruments meet the requirements of the EN 61557 standard
- Charge from car lighter (12 V) socket (additional accessories)
https://www.youtube.com/watch?v=ZKKcoVvN-B8

Add to basket
1
Three-phase 80A Energy counter with built-in communication | UEM80
Price range: R5,084.00 through R9,762.00 ex vat
Three-phase 80A Energy counter - Overview

The Three-phase Energy meter is for industrial and domestic applications, with built-in communication. Either: RS485 Modbus RTU/ASCII, M-Bus, or Ethernet Modbus TCP, depending on the module. Available with MID certification suitable for billing. Besides measuring energy, the meter can measure many electrical parameters and make them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software -> For energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software -> For energy meter management by PC in M-Bus network.
- Web server -> Built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Three-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-21 class 1, but for MID certified devices it fulfils class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 62053-23 class 2. The wide backlit LCD display has clear graphic symbols for easy reading. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three-phase 80A Energy counter - Features
- UEM80-4D R for RS485 Modbus RTU/ASCII communication
- UEM80-D M for M-Bus communication
- UEM80-4D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 4 wire networks with a balanced or unbalanced load.
  M-BUS model can be used also for 3 / 4 wire networks
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- Available with MID certification
Datasheet

CONTACT US FOR FURTHER OPTIONS

Select options
Single-Phase 80A Energy Meter with built-in communication | UEM80-2D
Price range: R4,939.00 through R8,426.00 ex vat
Single-Phase 80A Energy Meter with built-in communication - Overview

The UEM80-2D Energy meter is for industrial and domestic applications, with built-in communication, depending on the model. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software - for energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software - for energy meter management by PC in M-Bus network.
- Web server - built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Single-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-22 class 0,5 S, but for MID certified devices it moreover fulfils class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 6205323 class2. A wide backlit LCD display with clear graphics makes reading easy. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and long-lasting reliability.

Single-Phase 80A Energy Meter with built-in communication- Features
- UEM80-2D R for RS485 Modbus RTU/ASCII communication
- UEM80-2D M for M-Bus communication
- UEM80-2D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- LCD display with 7 main digits
- Available with MID certification
Datasheet

CONTACT US FOR MORE OPTIONS

Select options