Tag: Electrical contractors

Home -> Tag: Electrical contractors

Electrical contractors

Time Domain Reflectometer | TDR-410
R28,542.00 ex vat

Time Domain Reflectometer - Overview

TDR-410 time-domain reflectometers are designed to detect the location of faults in metal wires. These products are designed for electrical wholesalers, cable dealers, electrical installation companies, maintenance personnel at manufacturing plants and building personnel.

SONEL reflectometers are known for their long range, up to 4,000 m for the TDR-410, very low margin of 1% error in measurement, and the ability to adjust both the velocity of propagation and the impedance of the cable which is under investigation. Two cursors indicate the distance to 2 faults and the distance between them.

Cable fault location Includes:
- Locate damaged power cables
- Fault location for copper telecom cables
- Coaxial cable fault location
- Fault location for wiring infrastructure
- Detection of breaks, short circuits and damage
- Graphic depiction of damage to cable
- Automatic indication of the distance to fault
Time Domain Reflectometer - Features:
- Automatic or manual mode:
  - Automatic fault location (AFL)
  - Manual range selection and sensitivity
  - Scan continuous or single measurement
- Ranges from 7 m to 4000 m
- "Dead zone" measure limited to 0.5 m
- Backlit 2.5 " LCD screen
- Scan automatically or manually trigger
- Manually or automatically adjust sensitivity
- Impedance matching
- Propagation coefficient adjustment 1% to 99%
- Water-resistant housing
- Small size and weight
- Extended battery life of 30 hours
Add to basket
Loop Impedance Meter | MZC-304
R16,170.00 ex vat

Loop Impedance Meter - Overview

The MZC-304 meter is designed for testing the protection against electric shock in the mains systems. The meter is used to make measurements which determine the electrical installation safety level.

Loop Impedance Meter - Features
- Measurements of impedance in a short circuit loop
  - L-PE circuit
  - L-N, L-L circuit
  - L-PE(RCD) circuit - without tripping the circuit breaker ≥ 30 mA
- Low voltage resistance measurement
- Continuity measurement - DC current +200 mA with wire resistivity rest
- Low current resistance measurement with acoustic signalling
- The measurements are possible in installations 220/30 V, 240/415 V with frequency range 45...65 Hz
- Memory of 10 banks of 99 cells each (min. 10000 records)
- Radio wireless interface communication
Add to basket
MIC-2501 Insulation Resistance Tester/Meter
R18,539.00 ex vat
MIC-2501 Insulation Resistance Tester/Meter - Overview

A very handy tool for measuring Insulation resistance with up to 2500V. It can measure up to 1TOhms in accordance with IEC61557-2. Comes with a convenient carry case which has straps to free up your hands during operations.

MIC-2501 Insulation Resistance Tester/Meter - Features
- Selectable voltage in the 100…2500 V range with 100 V step
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of capacitance of tested object after the insulation resistance measurement
- Acoustic signalling of five-second periods to facilitate obtaining time characteristics
- Measured test times T₁, T₂ i T₃ to measure one or two absorption coefficients in 15, 60 and 600 s
- Indication of actual test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement methods
- Continuity measurement of protective and equipotential conductors according to EN 61557-4
- Leakage current measurement
- Alternating and direct voltages in the 0...750 V range
- Built-in rechargeable battery pack
- The instruments meet the requirements of the EN 61557 standard
- Charge from car lighter (12 V) socket (additional accessories)
https://www.youtube.com/watch?v=ZKKcoVvN-B8

Add to basket
1
Three-phase 80A Energy counter with built-in communication | UEM80
Price range: R5,084.00 through R9,762.00 ex vat
Three-phase 80A Energy counter - Overview

The Three-phase Energy meter is for industrial and domestic applications, with built-in communication. Either: RS485 Modbus RTU/ASCII, M-Bus, or Ethernet Modbus TCP, depending on the module. Available with MID certification suitable for billing. Besides measuring energy, the meter can measure many electrical parameters and make them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software -> For energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software -> For energy meter management by PC in M-Bus network.
- Web server -> Built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Three-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-21 class 1, but for MID certified devices it fulfils class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 62053-23 class 2. The wide backlit LCD display has clear graphic symbols for easy reading. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three-phase 80A Energy counter - Features
- UEM80-4D R for RS485 Modbus RTU/ASCII communication
- UEM80-D M for M-Bus communication
- UEM80-4D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 4 wire networks with a balanced or unbalanced load.
  M-BUS model can be used also for 3 / 4 wire networks
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- Available with MID certification
Datasheet

CONTACT US FOR FURTHER OPTIONS

Select options
Single-Phase 80A Energy Meter with built-in communication | UEM80-2D
Price range: R4,939.00 through R8,426.00 ex vat
Single-Phase 80A Energy Meter with built-in communication - Overview

The UEM80-2D Energy meter is for industrial and domestic applications, with built-in communication, depending on the model. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in communication ports. The LCD display shows the energy and instantaneous power. The COM port allows managing the connected meter remotely. Despite transmitting data over RS485, M-Bus or Ethernet the device has a dedicated application for remote management as provided:
- Modbus Master software - for energy meter management by PC in RS485 Modbus or Ethernet network.
- M-Bus Master software - for energy meter management by PC in M-Bus network.
- Web server - built-in interface for energy meter management by PC in Ethernet network. It enables data recording with manual or automatic data transferring where data is sent to a remote server at the set schedule.
This Single-Phase Energy meter is built according to EN 50470-1 standard. Active energy is compliant with IEC 62053-22 class 0,5 S, but for MID certified devices it moreover fulfils class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 6205323 class2. A wide backlit LCD display with clear graphics makes reading easy. Metrological LED on the front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and long-lasting reliability.

Single-Phase 80A Energy Meter with built-in communication- Features
- UEM80-2D R for RS485 Modbus RTU/ASCII communication
- UEM80-2D M for M-Bus communication
- UEM80-2D E for Ethernet (Modbus TCP) communication
- Direct connection up to 80 A
- Fully bi-directional 4-quadrant measurements for all energies and powers
- Class B according to EN 50470-3 (MID)
- 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)
- S0 output for energy pulse emission
- LCD display with 7 main digits
- Available with MID certification
Datasheet

CONTACT US FOR MORE OPTIONS

Select options
Three-Phase 4 wire Energy Counter | UEC1P5
R5,659.00 ex vat
Three-Phase 4 wire Energy Counter - Overview

The three-phase 4-wire energy counter is for industrial and domestic applications, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols. Besides measuring energy, the meter can measure many electrical parameters and makes them available on the built-in IR ports. The LCD display shows the energy and instantaneous power. This Three-Phase Energy meter is built according to the EN 50470-1 standard. Active energy is compliant with IEC 62053-21 class 1, but for MID certified devices it fulfils class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant with IEC/EN 62053-23 class 2. Wide backlit LCD with clear graphic symbols for easy reading. Metrological LED on the front panel and sealable terminal covers. Available versions with different voltage working range for the connection on a 3 or 4-wire network, suitable for balanced or unbalanced loads. The analysis of the MTBF values, the accurate selection of components, and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with excellent quality and reliability.

Three-Phase 4 wire Energy Counter- Features
- For 1 or 5A CT
- Programmable CT ratio
- Fully bi-directional 4-quadrant measurements for all energies and powers
- For 3 / 4 wire networks with a balanced or unbalanced load
- Class B according to EN 50470-3 (MID)
- Tariff input
- 2 S0 outputs for energy pulse emission
- LCD display with 8 main digits
- IR optical port for communication with external modules
- Available with MID certification
Datasheet

CONTACT US FOR MORE OPTIONS

Select options
Wire and Pipe Locator | LKZ-720
R24,293.00 ex vat

Wire and Pipe Locator - Overview

Detect and trace cables in ceilings, walls and floors with the LKO-720. The specially designed 3D antenna allows for precise wire tracing as well as making it easy to establish the direction of wires in concrete up to 5 cm. Locate power points and switches in buildings, the location of fuses, and trace insulated conductors. Non-contact detection of live cables allows for precise detection of energised wires in the air and concrete without additional probes.

Wire and Pipe Locator - Features
- Detects cables in ceilings, walls and floors
- Detects breaks in cables
- Traces cables in building installation
- Locates power points and switches in buildings
- Locates short circuits between leads
- Traces shielded cables
- Traces cables in metal ducts
- Identifies fuses on the distribution board
- Traces underground cables
- Traces conductive water and heating pipelines
- Non-contact detection of live cables
- 3D function in the receiver - detects direction of current flow
- Phase detection mode
- Receiver operation with four transmitters
- LED bright torch
- Headphone socket in receiver
- Screens backlit for work in dark
- Transmission of battery status and settings to the receiver
- Operation in wide range of rated voltage, up to 500V RMS
- Measurement of voltage up to 500 Vrms
- Three levels of transmitter amplification
- Automatic or manual selection of transmitter operation modes
- 5 modes of wire tracer operation - voltage, current, current-voltage, power & clamp
- Software upgrade via USB
- Additional accessories enable precise localisation
https://www.youtube.com/playlist?list=PLICwL6VglKz1POiL3V8rbq2nigFhdVFWw

Select options
1
High Voltage Cables and Joints tester | TEST PD

High Voltage Cables and Joints tester - Overview

The Test PD is a compact, portable device for the effective testing of cable heads and cable joints under a voltage of 6 kV and higher. The device is easy to use and has an advanced system integrated into its software, which allows the user to quickly evaluate the condition of the analysed object. This makes the device user-friendly for service personnel as it doesn't require special training. To test a cable joint, switch on Test PD, install it on an insulating stick and bring it close to the tested object. The information about the current joint condition will be immediately displayed in the form of 4-colour histograms and a cross-section of the high voltage cable. The Sonel TestPD mobile application for Android devices allows for remote reading of the instrument’s indications.

High Voltage Cables and Joints tester - Sensors
- Capacitive VHF sensor for partial discharge measurement (VHF, 2…100 MHz)
- Acoustic ultrasonic sensor for partial discharge measurement (AC, 40 kHz)
- Electromagnetic high-frequency sensor for partial discharge measurement (HF, 0.1…2 MHz)
- Non-contact pyrometer (-40°C …+120°C)
- Industrial current frequency sensor for synchronization of measurements (N)
Read more
Thermal Imager | KT-145

Thermal Imager - Overview

This is a robust and handy high-tech Thermal Imager. Its intuitive handling and user-friendly single-hand operation make it easy to use. The long battery life makes it an ideal tool for troubleshooting electrical installations, mechanical components, buildings management, process equipment, HVAC/R equipment and others.

Thermal Imager - Features
- Removable large capacity Li-ion battery
- 4-hour working time
- Friendly UI, easy to use without training
- Affordable as an entry-level diagnostic tool
- 3,5'’ screen with no image cropping
- High brightness screen
- Rugged and compact design, metal internal structure
- Standard Micro USB interface for data transmission and charging
- Wi-Fi connection (Optional)
Read more
Thermal Imaging Camera | KT-385

Thermal Imager Camera Overview KT385

Highly detailed images and accurate measurements. More to see, less to hold. The large display and compact design ensure a perfect balance between high performance and small dimensions. The centrally located navigation button supported by a menu on the touchscreen ensures simple and intuitive operation. Thermal imaging is not the only function. Its camera is equipped with visual lenses and related image mixing technologies: PIP, and MIF. Support from the built-in LED torch and laser improves operational quality by facilitating photography and then image interpretation. The built-in report module allows for the preparation and printing out of reports directly from the camera. Built-in communication interfaces ensure constant communication between the camera and the computer or mobile device, also over a wireless network. The ideal tool for both novice users and professional thermographic inspectors.

Thermal Imager Camera features
- high sensitivity of detectors and a wide temperature range
- comprehensive image analysis tools
- intuitive user interface
- IR video recording (on the SD card or computer disc)
- built-in report module
- different imaging modes: IR, visual, PIP, MIF
- built-in visual camera: 5 Mpx
- built-in: LED torch, laser pointer
- interfaces: Micro USB2.0, Wi-Fi, Gigabit Ethernet, Mini HDMI, slot microSD
Read more
Thermal Imager | KT-80

Thermal Imager - Overview

The Sonel KT series is an efficient, budget-friendly and professional infrared camera. This robust and very handy high-tech system is intuitive and user-friendly. Its single-hand operation makes it an ideal tool for troubleshooting electrical installations, mechanical components, buildings, process equipment, HVAC/R equipment and others.

Thermal Imager - Features
- Friendly UI, easy to use without training
- Affordable as entry-level diagnostic tool
- Removable large capacity Li-ion battery
- 4-hour working time
- 3,5'’ large screen with no image cropping, high brightness
- Rugged and compact design
- Standard Micro USB interface
- Wi-Fi connection (Optional)
Read more
Thermal Imager | KT-670

Thermal Imager - Overview

This fully radiometric, high-resolution camera records temperature at each point of the image. It makes shooting professional IR images fast and easy. It is compact, lightweight, durable, and water and dustproof. Casing IP54 rating. Other features include a compass, GPS, IR analysing functions, and Wi-Fi reports printing. Including free intuitive software for image editing and report creating.

Thermal Imager - Features
- WiFi & Bluetooth wireless communication
- Multiple image presentations including IR visible, PIP and IR blending
- High resolution IR images up to 120.000 pixel (400x) and 307,200 pixels (640x480) alternative
- Visible light digital camera 5MP resolution with LED lamp provides sharp images
- 5-inch 720P high-resolution LCD touch screen for better image clarity and easy operation
- Rotating LCD display up to 270" for easy viewing angle
- Rotating lens pivots up to 70" for easy viewing angle
- 4x (or 10x for plus version) continuous zoom with auto/motorized focus
- Android-based operation system with open platform for various APP developments and convenient program upgrades
- Powerful onboard analysis and reporting capabilities
- Optional high-temperature range measuring up to 2000^oC (3632^oF) targeting electrical and industrial applications
- Optional 11 telephoto or 45 wide angle lens
Read more
1
Short Circuit Loop Impedance Meter MZC-305

Short Circuit Loop Impedance Meter - Overview

The MZC-305 meter is a modern, easy-to-use, safety measuring device. It is used to make measurements which help determine the electrical installation safety level. These tests help verify that if a fault occurs in an electrical installation, enough current will flow to operate the circuit breaker or fuse protecting the faulty circuit in the adequate, predetermined time.

Short Circuit Loop Impedance Meter - Features
- Loop impedance measurement resolution 0,01 Ω
- Loop impedance measurement without tripping the circuit breaker > 30 mA with resolution 0,01 Ω (100...440 V)
- Measurements possible in installations 110/190 V, 115/200 V, 127/220 V, 220/380V, 230/400 V, 240/415 V, 290/500 V and 400/690 V (range 100...750 V)
- Short circuit current indication
- Voltage measurement up to 750 V and up to 250 V with resolution 0,1 V
- Measurements using Uni-Schuko adapter or test wires 1,2; 5; 10 and 20 m
- Memory of 990 records
- USB connection with PC
- Powered by disposable or rechargeable (4xAA)
Read more