Industrial

1
Calorimetric Air Flow Meter | FTM06C-A

Calorimetric Air Flow Meter Overview

This flow meter utilises the calorific measuring principle. Two measuring elements as well as a heat source are located on the measuring tip. The effect of the air flowing through the meter is that heat energy is absorbed and conducted away, resulting in a lower temperature. The resulting temperature change is an indication of flow. This Air Flow Meter is suitable for various severe environments and can therefore be used in slightly corrosive air.

Calorimetric Air Flow Meter - Features
- Thermal mass flow
- Quick response
- Good sensitivity
- Turndown ratio 500 ：1
- High precision & accurate sensing at the lowest flow rate for metering applications
- Output: Analog / RS-485
- Use measured with square pipe or 2" pipe above
- IP rating： IP65
- Stainless steel casing, suitable for various severe environments
- Display Cumulative flow / Instantaneous flow
Read more
Thermal Mass Flow Transmitter | FTM06D

Thermal Mass Flow Transmitter - Overview

The FTM06D Thermal Mass Flow Transmitter uses thermodynamic principles to measure air volume and air velocity. There are two temperature sensors inside the probe: one for temperature measurement, and one for temperature measurement after heating. Temperature differences between the two sensors are used to calculate measuring flow rate. This transmitter has all-metal housing and is suitable for a variety of pipe diameters. Widely used in industries like Electronics, Compressed Air, Papermaking, Food, Pharmaceuticals, Biotech, Hospitals, and other factories.

Thermal Mass Flow Transmitter - Features
- Thermal mass flow sensor
- Can measure air volume and air velocity
- Analog / RS-485 / Impulse output
- Accurate measurement
- Using constant temperature anemometer(CTA) technology, good sensitivity
- Unit setting：[L/min], [°C], [°F], [m/s], [ft/s], [Nm³/h]
- Stainless steel housing, suited to a variety of harsh environments
- Built-in temperature compensation
https://www.youtube.com/watch?v=9vIttv1x0eo&t=8s

Read more
2
Platon Variable Area Flow Meters Glass Tube | DS1115

Platon Variable Area Flow Meters Glass Tube - Overview

Variable area flowmeters are produced with glass flow tubes in various lengths, for gas or liquid flow measurement. Glass tubes have higher pressure and temperature range than plastic tubes. They are easy to use and come in a variety of sizes. Suitable for use in medical (anaesthetic), industrial, and laboratory applications. The NGX series frames have flow tubes with measurements in 100mm long scales, whereas the smaller LGX frames have flow tubes with measurements in 30mm scales. These are easy to install, as they are usually surface mounted on a vertical panel.

Platon Variable Area Flow Meters Glass Tube - Features
- Improved industrialised construction
- Easy to use
- High visibility scale
- Rear ‘blow out’ safety vent
- Ergonomic design
- Operator confidence from float rotation
- Instantaneous response
- Airflow range 5 mL/min to 150 L/min
- Customized scales
- UV stabilized rigid safety cover
- Glass tube removal without tools
- ATEX Infra-red alarm option
- Range of accessories
- Accuracy up to ±1.25% FSD
- UKAS calibration optional
Read more
Combined Wind Sensor | 14516 WENTO-MET

Combined Wind Sensor - Overview

Extreme Weather Conditions are no problem at all for this extremely robustly designed wind speed and wind direction sensor. Special alloy and double high-performance bearings provide superior resilience and long service life. The high-quality construction with integrated, electronically controlled heating allows for reliable wind measurement even under extreme weather conditions.

Combined Wind Sensor - Features
- Simple and rapid pipe mounting, connection with only one cable
- Broad measuring range
- Serial interface for direct connection to PC technology
- Contactless data acquisition
Read more
Static Wind Sensor | PREOS 16440

Static Wind Sensor - Overview

The static hotwire air flow meter, also known as a Thermal Anemometer, is specially designed for extreme environmental conditions including very cold climates. With no movable elements, it can withstand winds of up to 0...100 m/s and measure wind speeds of up to 65 m/s. The extremely robust and compact sensor has a high-quality, pollutant-resistant housing made of anodised aluminium.

Static Wind Sensor - Features
- No movable measuring elements
- Measures wind direction and wind speed
- Standard RS 422 interface with ESD protection
- ASCII data protocol according to NMEA 0183
- Simple, space-saving assembly
- Analogue output 4...20 mA for wind speed and wind direction
- Power supply 18...32 VDC with integrated overvoltage protection
- Integrated sensor head heating and heating ring in the base to prevent a build-up of ice and snow at the sensor
Read more
Weather Data Logger | met[LOG]

Weather Data Logger - Overview

The met[LOG] data logger is a stand alone system working in conjunction with the met[app] software. Quickly and easily transfer your climate data onto your network (Ethernet LAN) in your local browser. The met[LOG] has an autoconfiguration via plug & play for the uncomplicated commissioning. The browser app which is integrated with the met[LOG] ensures easy visualisation of the current climate data in your network. Platform-independent on your PC, tablet or smartphone.

Weather Data Logger - Features
- Real-time access to measured data via an integrated webserver
- Visualised data in any browser
- Calculates trends and patterns
- Automatically performs corrections based on altitude and air pressure
- Issues a warning or raises an alarm thanks to its digital outputs
- Plug & play
- Auto-configuration by push of a button allows full working capability within seconds
- Various combinations are possible: 7 interfaces allow connection of 4 analogue and 3 serial sensors
Read more
Static Wind Sensor | com[b]

Static Wind Sensor - Overview

Measure wind direction and wind speed. With various output options including: Current, NMEA 0183, WIMWV or Modbus RTU, simplifies sensor installation and integration into networks. com[b] has no moving parts. Its spectacular survival velocity of more than 100 m/s makes it unbreakable for wind influences. Precious materials like aluminium and zinc oxide and the optimised thermo-dynamic measuring principle stand for highest quality.

Static Wind Sensor - Features
- No moving parts
- Velocity of more than 100 m/s
- 2 parameters measurable
- Space-saving
- Easy installation
- Interfaces on board: analogue, Modbus and serial
- Ready-to-go in challenging climatic conditions of up to -40°C
Read more
Weather Data Logger | ser[LOG]

Weather Data Logger - Overview

The Ser [LOG] system gives you the greatest freedom for configuring your customised measuring station. It ensures expandability thanks to the modular design where it can be expanded to a total of 3 analogue/digital measurement modules. This allows for additional 36 analogue channels and 11 digital channels. It is highly flexible thanks to a multitude of configuration options and state-of-the-art communication interfaces. Uses Bluetooth, GSM, FTP, e-mail, SMS, Modbus-RTU, Modbus-TCP, SDI-12 etc. The configuration is easily done with the app "Ser[LOG] Commander".

Weather Data Logger - Features
- Expandable due to modular design
- High flexibility due to a multitude of configuration options
- Extensive sensor library
- Formula collection and free formula parser
- Alarm system for 10 warning channels via built-in and external relays, email, SMS
- Interference-resistant due to shielded aluminium housing
- User-friendly with free access to all connections and controls
Read more
Mid Energy Meter | UEM63-4D R70
R5,789.00 ex vat
Mid Energy Meter - Overview

This three-phase energy meter for energy measurement in industrial and civilian applications has 4 DIN modules. It comes with built-in RS485 Modbus RTU/ASCII communication. Available with MID certification which is suitable for billing. The meter can measure the main electrical parameters and makes them available on the built-in COM port, making management by a remote station possible. Data is transmitted on a RS485 line. A free dedicated application for remote management is provided. The backlit LCD display shows the readings clearly and easily. The specific selection of its components reduces the internal working temperatures, guaranteeing a product of excellent quality.

Mid Energy Meter - Features
- RS485 Modbus RTU/ASCII communication
- Up to 70°C operating temperature
- Fully bi-directional 4-quadrant measurements of all energies and powers
- For 4 wire networks with a balanced or unbalanced load
- Direct connection up to 63 A
- Class B according to EN 50470-3 (MID)
- S0 output for energy pulse emission
- Available with MID certification
Add to basket