Action Instruments Product Categories

Home -> Action Instruments Product Categories

Action Instruments Product Categories

2 Wire Temperature Transmitter | TP04
Price range: R2,093.00 through R2,421.00 ex vat
2 Wire Temperature Transmitter - Overview

This electronic device is used to send a temperature measurement, which is taken by a temperature sensor, over 2 wires to the processing unit. The transmitter is responsible for converting the small electrical signal from the temperature sensor into a more readable signal for the processing unit.

2 Wire Temperature Transmitter- Features
- Monitoring for long-distance temperature signal transmission
- SS Housing, with anti-condensation function and good heat dissipation
- Good measuring repeatability and anti-interference
- Signal transfer from PT sensor to 4 ... 20 mA
- With SD05 integrated signal indicator for local display (Optional)
Select options
Multifunction Temperature and Humidity Transmitter | THS30X
Price range: R5,101.00 through R6,335.00 ex vat
Multifunction Temperature and Humidity Transmitter - Overview

Capacitive Humidity Sensor & Pt 100 A class Temperature Sensor. Available as Wall, Remote, Outdoor and Duct type. This industrial sensor comes with high accuracy and long-term stability and is capable of temperature compensation and linear calibration. With 2 analogue outputs or Modbus RS-485 and an optional analogue output + RS-485. Includes free programmable software for Physical quantities / Output / Data logger / Charts / Calibration.

Multifunction Temperature and Humidity Transmitter - Features
- Measuring range between -40 ... +80°C / 0 ... 100%RH
- Output : 4 ... 20 mA / 0 ... 10 V / RS-485
- Accuracy: ±0.2°C / ±1.8%RH
- IP rating of IP65.
Select options
Pro Wireless Hardness Tester | Lab UCI Pro

Pro Wireless Hardness Tester - Overview

This next-generation portable hardness tester uses Ultrasonic Contact Impedance (UCI) technology. It delivers a new level of measurement accuracy, stability, and usability, setting a higher standard for UCI hardness testing in both laboratory and field applications. The new technology and probe design significantly minimises operator influence and ensures highly repeatable results, even when testing complex-shaped components, thin parts, and surface-hardened layers.

Pro Wireless Hardness Tester - Features
- Full features without smartphone
- Easy to use and portable
- Measurements on products of almost any size and shape
- Wide range of scales and materials
- Operation in hard-to-use areas
- Easy user material calibration
- Connection to the Novoteat Lab App
[embed]https://www.youtube.com/watch?v=N25-eJ13xcg&t=2s[/embed]

Read more
Wood Moisture Meter | HF 550

Wood Moisture Meter - Overview

This instrument measures the moisture of wood in conformance with applicable standards. The instrument automatically recognises if a probe is connected to measure the moisture of firewood logs or bulk materials. It switches to the corresponding menu and assists the measurement process with straightforward information. This guarantees the measurement conforms to the specifications contained in VDI 4206, Part 4, with very little effort.

Wood Moisture Meter - Features
- Unconditional versatility
- High precision
- User-friendly
- Intuitive menu navigation
- Colour display
- Integrated data management
- Unconditionally robust
Read more
Handheld Flow Anemometer Thermographer | GT8907
Price range: R995.00 through R2,395.00 ex vat
Handheld Flow Anemometer Thermographer - Overview

This multifunctional digital anemometer is a professional instrument for measuring wind speed, temperature, and humidity. It is designed for wind speed measurement in engineering, quality control, and health control. Applications include factories, schools, offices, transportation routes, families, etc.

Handheld Flow Anemometer Thermographer - Features
- Measures current wind speed, temperature and humidity
- Measures current air volume, temperature and humidity
- Measures wind speed/ MAX wind flow/min wind flow
- 2/3 wind flow value/ average value
- Wind speed/flow units and temperature units selection
- Measure wind direction angle
- Real-time measurement when connecting USB with computer software
- Backlight and data holding (HOLD)
- Low battery indication
- Automatic shutdown setting
Select options
5
CMP-200 Clamp-On AC Leakage Current Meter
R1,504.00 ex vat

Clamp-On AC Leakage Current Meter - Overview

The CMP-200 digital clamp meter is designed for clamp measurements of AC leakage current.

Clamp-On AC Leakage Current Meter - Features
- high resolution (0,1 mA)
- three measuring ranges: 200 mA, 2 A, 200 A
- display LCD 3½ digits (max 1999)
- white LED backlight
- internal diameter clamp approx. 30 mm (1,2")
- DATA HOLD function, for holding measured values
- MAX function
- AUTO-OFF function
- double moulded casing
Add to basket
Multifunction Signal Calibrator | SG-004A
R3,995.00 ex vat
Multifunction Signal Calibrator - Overview

This Multifunction Signal Calibrator is an all-in-one compact configurable multifunction unit. It simultaneously reads and sources various common instrument signals. mA Loop calibrator, mV and DCV, Thermocouples, RTD PT100, Resistance (ohms) and frequency (Hz) . 12V/24V loop power selectable, programmable stepping and ramp function, graphic colour LCD, real-time trend graph and memory for 100,000 records.

Multifunction Signal Calibrator - Features
- Pocket size calibrator
- 5 Digit graphic and backlit 2.4” TFT full-colour LCD screen
- Functions: mV, V, mA, Hz, Ohms, PT100 and Thermocouples
- Read and Source signals simultaneously
- mA: 0.000 ~ 24.000mA (Active and Passive XMT)
- Loop power 24V DC ±10%, max 24mA (Can be set to 12V)
- mV DC: -10.00 ~ 100.00mV
- V DC: 0.000 ~ 24.000V
- Frequency/PWM: 0 ~ 9999Hz
- Thermocouple types: K/J/E/T/R/S/B/N
- PT100: -200.0 ~ 650.0ºC
- Resistance: 0.0 ~ 390.0Ω
- Programmable output, Stepping (25% steps) and Ramp functions
- Power: Built-in 3.7V 3000mAh rechargeable battery (up to 10 hours use)
- Size: 112 x 82 x 28mm and approx. 167g
- c/w 4 x leads with clips, USB-C cable, charger and manual
Add to basket
1
Advanced Industrial Digital Multimeter | CMM-60
R12,861.00 ex vat

Advanced Industrial Digital Multimeter - Overview

The CMM-60 multimeter allows you to record data thanks to the Trend Capture function showing a historical graph from the built-in memory. It is also possible to transfer data and analyse the results in the Multimeter Software. The device facilitates the diagnostics of potential problems covering the operation of industrial automation, electromechanical devices, motors and distribution of electricity. Precise indications, the convenience of use and early detection of irregularities in the operation of machines and devices are the main benefits of having this device in your equipment. All whilst adhering to strict safety requirements during work in industrial conditions.

Advanced Industrial Digital Multimeter - Features
- Colour display with a counting range of up to 50,000 digits
- Allows reading at a wide-angle in poor lighting conditions
- Quickly detect irregularities due to measurement results displayed in graphical form
- Over 14 measurement functions
- Display the value of the constant and variable component or the sum during voltage measurement
- The 4~20mA function for measurement of the control circuits of temperature, pressure, pH or flow sensors
- True RMS for AC voltage and current allows measuring the effective value of distorted waveforms
- Built-in low-pass filter
- Save results of fast 1ms waveforms thanks to the PEAK value measurement function
- Relative measurement function allows elimination of resistance values of test leads
- Display the result of the measurement of the constant and alternating components of the signal simultaneously
- Real-time clock to add date and time of measurement to each sample
- Recalling measurement results from the built-in memory for 2000 measurements
- Registration of maximum and minimum values
- Calculation of the average of current measurements
- Built-in Bluetooth
- HELP function
- Optional strap with a hook
- IP67 protection level
- The rotary switch has been designed for easy handling
- Dedicated lithium-polymer battery
- A dedicated charger and power supply for charging the battery without removing it
"m.v." means a standard measured value

Add to basket
2
True RMS Industrial Digital Multimeter CMM-40
R4,513.00 ex vat

Industrial Digital Multimeter - Overview

This Industrial Digital multimeter CMM-40 was designed for measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature, testing diodes and continuity. It is a Cat IV Digital multimeter rated up to 600V or Cat III up to 1000V.

Industrial Digital Multimeter - Features
- 2 Years Warranty
- Auto/manual range selection
- display 4¾ digits (40000 max)
- "DATA HOLD” function, for holding measured values
- "REL” function, comparing measurements relative to a stored reference value
- "MAX/MIN” function
- "PEAK HOLD” function
- memory for 2000 measurement results
- continuity test with acoustic signalling (beeper)
- "AUTO-OFF” function
- double moulded, IP65 waterproof casing
Add to basket
Electric Vehicle Multifunctional Analyser | EVSE
R95,743.00 ex vat
Electric Vehicle Multifunctional Analyser - Overview

This multifunctional analyser is an instrument dedicated to the diagnostics of electric vehicle charging cables and stations. Using a single device, it performs a set of tests and generates a professional report. Through appropriate simulation of CP and PP circuits, the meter can put the station into various operating states. This allows the verification of the control system and performs measurements in the field of electric shock protection. It completes the verification of functionality and safety by simulating errors on the power supply side, i.e. the charging station (ICCB), and charging side of the vehicle (CP circuit).

Electric Vehicle Multifunctional Analyser - Features
- Simulation of PP cable parameters:
  - open circuit
  - 13 A, 20 A, 32 A, 63 A, 80 A.
- Simulation of CP communication:
  - state A – vehicle not connected
  - state B – vehicle connected, not charging
  - state C – vehicle connected, charging without ventilation
  - state D – vehicle connected, charging with ventilation
- Safety measurements:
  - measurement of short circuit loop Z
  - measurement of parameters of RCD circuit breakers (AC, A, B, 6 mA DC)
  - measurement of insulation resistance R_ISO
  - measurement of R_CONT
  - phase sequence indication
  - resistance of coding resistor R_C
  - measurements of grounding R_E
- EVSE analysis – diagnostics:
  - CP+, CP- voltage
  - frequency f (PWM)
  - signal filling D (PWM)
  - maximum charging current I_MAX
  - graph of CP+, CP-, f, D, I_MAX
  - t_off off time
  - t_on on time
- EVSE analysis – simulation of errors (ICCB, EVCS):
  - CPsh – short circuit of CP to PE
  - Dsh – diode short circuit
  - PEop – interruption in PE
- EVSE analysis –simulation of power supply circuit faults (ICCB):
  - L1op – interruption in phase L1
  - L2op – interruption in phase L2
  - L3op – interruption in phase L3
  - Nop – interruption in N
  - PEop – interruption in PE
  - L↔PE – interchanged L and PE wires
  - U_EXT(PE) – voltage on PE wire
- EVSE analysis – transition time between states
Add to basket
Leakage and Partial Discharge Acoustic Imager | KUS-100
R227,887.00 ex vat
Leakage and Partial Discharge Acoustic Imager - Overview

The KUS-100 acoustic imager has a built-in array of microphones which effectively detect sources of acoustic emission. This is extremely useful in industrial applications to detect leaks of compressed agents. It is also used to detect partial discharges in the power utility industry. This vital diagnostic tool enables significant savings by reducing energy losses. The imager operates in two detection modes: leakage and partial discharge. It can be manually tuned to the detected frequencies and the sensitivity level can be changed to avoid unwanted reflections and interference. Comfortable to use with an improved touch screen. A convenient strap is mounted to the housing.

Leakage and Partial Discharge Acoustic Imager - Features
- 2 detection modes
- Leakage mode
- Partial discharge mode
- Touch screen
- Manual tuning
Add to basket
Industrial Acoustic Imager | KUS-200
R296,893.00 ex vat
Industrial Acoustic Imager - Overview

This acoustic imager is an essential diagnostic tool, which enables significant savings by reducing energy losses. The imager operates in two detection modes: leakage and partial discharge. It can manually adjust the detected frequencies and change the sensitivity level to avoid unwanted reflections and interference. It is comfortable to use and has an easy-to-use touch screen. It also has a convenient strap mounted to the housing. Due to the Bluetooth communication, the camera's sounds can be output to an external audio device (speaker or wireless headphones). Applications include detecting leaks of compressed agents in industrial installations or partial discharges in the power utility industry. It is suitable for use in diagnostics of high-voltage devices, leak detection in gas installations, and inspection of compressed air systems.

Industrial Acoustic Imager - Features
- Bluetooth connectivity
- Handy strap
- Easy to use
- Display
Add to basket
3
CO2 Data Logger with Humidity and Temperature – CL11
R15,000.00 ex vat
CO2 Data Logger with Humidity and Temperature - Overview

The CL11 benchtop display unit is an inexpensive multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. The SW21 software package can be easily set to record as required. Data can then be downloaded, saved and analysed. Equipped with a stable humidity sensor, ROTRONIC HYGROMER® IN-1, this CO2 data logger offers unbeatable value for money.

CO2 Data Logger with Humidity and Temperature - Features:
- Includes SW21 software for configuration and data download
- Measures and logs CO2, relative humidity and temperature
- Optional external temperature probe
- Stable HYGROMER® IN-1 ROTRONIC humidity sensor
- 40,000 data point memory for CO2, humidity, temperature, external temperature values
- Maximum, minimum and average values displayed
- Adjustable audible and visual CO2 alarm
Add to basket
Refrigerant Leak Detector | RL 200
R7,145.00 ex vat
Refrigerant Leak Detector - Overview

With its sensitivity of 3g/a, it enables reliable detection of the smallest refrigerant leaks. It has been developed in accordance with the strict guidelines of the F-Gas Regulation and BS EN 14624:2012. The RL 200 meets the highest standards in terms of environmental protection and technical precision. It is easy to use. The digital display gives you an overview of the measured values. The automatic zero value setting makes handling even easier, so that you can concentrate on the actual task: detecting leaks in the refrigerant system. Increase the efficiency of your maintenance processes and minimise potential environmental impacts.

Refrigerant Leak Detector - Features
- 3g/a Sensitivity
- Conforms to standards of F-Gas Regulation and BS EN 14624:2012
- Easy to use
- Digital display and automatic zero value setting
- < 1 s Response time
- Sensor lifetime ≥ 1 year (with normal use)
Add to basket
Digital Analogue Temperature and Humidity Transmitter | THS17
Price range: R2,136.00 through R2,681.00 ex vat
Digital Analogue Temperature and Humidity Transmitter - Overview

This compact Temperature and Humidity Transmitter is easy to install and boasts economic pricing, high accuracy and long-term stability. It comes in PC fire-proof class plastic and SUS304 metal housing. Suitable for monitoring of HVAC process, air conditioning, environmental ventilation control, buildings, factories, clean rooms and laboratories.

Digital Analogue Temperature and Humidity Transmitter - Features
- Real-time data of temperature & humidity
- PC fire-proof class plastic and SUS304 metal housing
- Economic price, high accuracy, nicer long-term stability
- MEMS semiconductor sensor
- Anti-condensation protection
- Digital: RS-485 ; Analog: 4 ... 20 mA or 0 ... 10 V
- Compact size and elegant outlook and easy to install
Select options